Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 24 Results
  1. Classic Tech
    Hi all, I know this topic has been discussed to many ends, however I can't seem to find good answers based on experience. I have a 65 coupe, pretty much stock front suspension, the car is lowered 1 inch all around and a few other things. I want to fit US Mags' Standard Wheel. 17x7 all around...
  2. Wheels, Tires, Brakes & Suspension
    I have a 2013 mustang gt with sr performance lowering springs (1.5 all the way around) I'm wanting American Muscle "AMR" staggered wheels. (20X10 on the rear, and 20x8.5 in the front) does anyone have any idea of white size tire to run to have the best possible fitment (I hate the look of my...
  3. 5.0L Tech
    Last night i installed the energy suspension motor mounts into my 88 GT. The passenger side was simple and seats into the bracket correctly. However, the driver side doesnt seat all the way down into the bracket, even though i let the motor down off the jack, and the passenger side was Not...
  4. Wheels, Tires, Brakes & Suspension
    Has anybody ran the APEX 18x10" ET43 APEX EC-7 Mustang Wheels? I was looking into the Roush 18x10" rims on Brenspeed and Roush's sites, but the Roush's chrome 5-spoke is upwards of 30 pounds.. The APEX seems to be the best performing rim I've found for the money, but I don't know if I'll need to...
  5. 4.6L Tech
    I'm thinking of buying this one guys gt500 mufflers off of his i think 08 stang. I just want to make sure that it would fit my new edge gt.
  6. Wheels, Tires, Brakes & Suspension
    It's time to replace the 20 year old Cragar SS Mags and bias ply tires on my Mach 1. It only gets a couple of hundred miles a year on it, but the tires are beginning to crack in the sidewalls. I want to replace the 14x6 rims with 15x7. The stock backspace is 4-1/4" for the stock 15x7...
  7. Classic Tech
    Hi everybody, I have a 1969 Grande with all around drum brakes that I believe are factory. I need to know the right size, offset and amount of backspacing I need for proper fitment. If you have any knowledge on the subject please let me know asap. Thanks in advance, Aidan
  8. 2005-2010 Mustang Talk
    I've searched multiple forums to find an answer, and have been highly unsuccessful. My friend has a 2005 mustang and is trying to put 19" wheels on it (with a width of 9.5). We went to a shop to have them installed with 245/45/19 tires, and they got them on and said they would not fit without...
  9. 2005-2010 Mustang Talk
    IF I was to come across on of these for cheap, what has to happen for it to fit onto my 4.6 in my 2008 GT ? I am not sure on the Fitment for these, any information would be helpful thanks a lot everyone :)
  10. 2011-2014 Mustang Talk
    Just curious if anyone out there has tried fitting their OE Grille fogs into the Boss302s grille. I love the look of the boss grille and the mesh covers but I don't want to get rid of my fogs. Anybody done this? or no someone who has?
  11. 4.6L Tech
    Ok, so I've been waiting patiently for about a month now for this headers to be shipped they are "PaceSetter 72C3229 Performance Armor Coat Long Tube Exhaust Headers" off of amazon. The problem is that I just now noticed that it says it will fit 96-00 Base, Gt, cobra mustangs. Will it also fit...
  12. 2005-2010 Mustang Talk
    Hey guys, I'm about to buy some wheels for my car off of Craigslist. The wheels are: 17x9 in the front, and 17x10.5 in the rear. The tires are: 275-40z-17 in the front, and 315-35z-r17 in the rear. These wheels were previously on a 2000 GT. I would like to know: Whether or not the wheels...
  13. 2005-2010 Mustang GT Tech
    Hello All, I've been interested in getting some new tires and wheels for quite a while. After my last track day at Thunderhill, I'm at the point where I need some new rubber. I figured this is as good at time as any to move forward. I've been looking into many different combinations and I think...
  14. 2011-2014 Mustang Talk
    Happy new year to everyone. For an entire year I've been looking at various wheels and saving up a little bit of money. This spring I plan on buying a new set (I'd buy them now but we were just blessed with 18'' of lake effect snow). My biggest concern is how well they fit into the wheel well...
  15. 4.6L Tech
    I have a 2000 Mustang GT with the Mach 460 setup. Actually, there is only the tweeters and amps left from the Mach 460. The previous owner replaced everything else. Electronic express is having a Black Friday sale on a pair of Kenwood 6x9's for $30. I was going to buy 2 pairs since ALL of my...
  16. 2005-2010 Mustang Talk
    I saw these wheels on craigslist and I might get them. They're on a 2001 Cobra right now, anybody recognize them/ know if the offsets okay for the S197? Are they 9" wide? The guy didn't seem to know a whole lot. I'm going to look at them in like an hour and a half or so.
  17. 5.0L Tech
    Im looking into some 17x10s for the rear of my vert but will they fit with just removing the quads? Im not going to try to fit huge tire on them maybe a 275 or a 285 on a 17x10 pony r. I do not want to roll the fender lip and risk screwing up the paint though... If anyone knows please post...
  18. 2005-2010 Mustang GT Tech
    Picked up a set of gt500 wheels for my 05 gt. Should they mount up right. They are stock I believe. P285/40zr18 rear. P255/45zr18 front. Working off my phone so if this has been asked don't jump me too bad for it. Has the five spokes that branch into two more
  19. 4.6L Talk
    Will Rims that are on a 96 stang fit on a 68 ? 5 lug patterned . Please help me out .
1-19 of 24 Results