Ford Mustang Forum banner

fluid

  1. 2005-2010 Mustang GT Tech
    Hi I'm new to the forums been browsing them forever, all the old threads are like 2013 and below so not really modern standard, anyways I have a 07 GT w a quickshifter, I wanna get new tranny fluid I know the manuals take ATF, so I called Tremec they say use Mobil1 or the Factory Dexron 3 Mercon...
  2. 2005-2010 V6 Mustang Tech
    First, let me thank all of you for providing the wonderful information you do, i have been reading the forum for a while and just decided to join. Thank you all for the wonderful DIY help and recommendations. Now to the issue: I have a 2006 v6 automatic with 118,000 miles that ive owned for...
  3. Classic Tech
    I just have a few miscellaneous questions about my car and how to fix them. Here's the run down of my stang, 1968 Coupe with a 302 2V. Stock rear end and a 3 speed transmission. Question #1: I have a 3 speed transmission and I was driving it after getting it road worthy and noticed that I could...
  4. Mustang Tech
    Hi. I'm building a 4-cyl dirt modified with a 2.3L and 4 speed manual out of an 86 Mustang. Looking for transmission fluid type and capacity. Thanks alot! Elliot
  5. 2005-2010 Mustang Talk
    im looking to get a new rear differential cover and cant find a good one any tips or links? v6 2008 mustang. also what kind of rear differential fluid should i use?
  6. 2011 - 2014 Mustang GT Tech
    I know this topic may seem to have been beat to death, but I have some specific questions that I haven't seen answered on here yet... I just changed all my rotors, pads, and fluid (EBC rotors, Hawk HP+, Brembo LCF) and manually bled fluid. Used 1.5L of fluid, everything was clean with no...
  7. V6 Tech
    The top on my convertible will no longer go back up. I took it into the garage expecting to have to replace the pump. However, the mechanic found that the piston seals are bad and fluid leaks out of the pistons so the system doesn't maintain enough pressure to put the top back up. He tried to...
  8. Classic Talk
    Hello! So after almost a year and a half of restoring my 69 mustang, I finally got it on the road. I was driving it and when i stopped a whole bunch of radiator fluid was dumped out. When i got the car there was an overflow cannister made of plastic, but it was cracked and broken. Because of...
  9. 5.0L Tech
    Ive seen alot of posts on the correct fluid some say T5 atf some type F and some have said lucas. So which do I use to flush my noisy pos power steering pump and how much? It had a leak or has a leak noticed it on the top on the hood so I suppose its the shaft seal on the pump. I had been...
  10. V6 Tech
    Hey guys as u can see shes a lil rough at the moment, heads have only been off about 3 months, been covered with a tarp but i guess it jus wasnt good enough, is there any kind of fluid i can let sit in my cylonder walls to fix this?? Any ideas guys
  11. 2011-2014 Mustang Talk
    So I flushed and bled the brakes yesterday. I had a pressure bleeder from before with a working adapter for the reservoir cap, but I had a small leak in the in one of the hoses and ended up spilling brake fluid everywhere. So I ended up doing it the old-fashioned, two-person way. One pumper...
  12. V6 Tech
    Just wondering if there was a way to drain the power steering fluid or replace it without having to suck it from the reservoir with the turkey baster method...i noticed a hose running down from the reservoir just wondering if i can simply pop the clamp off and pull off the hose and let it drain...
  13. 4.6L Talk
    I've seen a few threads about the problem I've had a few times these last months, so I just want to share my story/experience. I will not post a step-by-step guide on how to do this. I will not recommend this unless you are mechanically inclined or have someone who is with you to help. I've now...
  14. Classic Talk
    Alright, so I'm trying to find out what kind of fluid should be used, or is ok to use (wont kill my transmission) I've seen alot of stuff saying dont do it its the end of the world, and other people saying it really doesn't make a difference another issue though im not entirely sure if it...
  15. Classic Tech
    Hi there, I'm storing my 1968 289 Coupe Sprint B Mustang for several years (unfortunately this had to be done, have to wait for a while before I can fully enjoy this gem again!...) The most important thing I haven't succeeded in doing yet to make sure this baby will be relatively easy to get...
  16. Classic Tech
    I am a rookie at working on this car and need help. I think that I need to put additional fluid in the reserve on my 67 convertible. I cant seem to figure out how to do that? First, where is it? I have removed the back seat and found the pump but where is the reservoir? What fluid do I use?
  17. V6 Tech
    I've currently been working on changing my transmission fluid for about 2 hours now on my 03 mustang which is a manuel. I have the old transmission fluid drained and now i'm trying to get transmission fluid in the transmission. However i've ran into several problems. My syphoner is crap and...
  18. 5.0L Tech
    Ok so I was just on my way home and someone was stopped right on a corner so I stomped on the breaks but when i did the break pedal almost touched the floor and I slowly rolled to a stop. My breaks were like that the rest of the way home and as i was breaking to pull into my house, the parking...
  19. Classic Tech
    hi. im a college kid with a 66 inline 6 3 spd mustang. im having transmission problems. i just wanted to check the fluid levels for the clutch. however i cant find a clutch resevoir. is there only one master cylinder for brake and clutch ? i need help. thank you.
  20. 2005-2010 V6 Mustang Tech
    I just passed 31,000 miles in my 2007 V6 mustang and would like to change my automatic transmission fluid. Is it hard? do you need any special tools? Have any of you done it? Also, off topic but i would also like to clay bar my car. Can you mess you paint up by claying, and what are the...
Top