Ford Mustang Forum banner

flush

  1. 2005-2010 V6 Mustang Tech
    Hey guys! So this is something that has been bothering me for a while. When my s197 's hood shuts it doesn't close flush to the fender on one side. The passenger side closes slightly lower than the body. Any possible causes for this and any solutions? Thanks guys!
  2. Classic Talk
    To anyone who could shoot me in the right direction, My father and I have been slowy restoring a 1967 Mustang. It was sitting in my grandfathers backyard for 17 years I believe. The Radiator, hoses, thermostat, and thermostat gasket have been replaced. The car continues to overheat within about...
  3. 4.6L Tech
    Do i need to bleed the coolant system after drain/flush/filling it ? Had my cracked intake manifold replaced at a shop, they filled it with new antifreeze. After my test drive on the freeway and a little running around, I let the car cool and I checked the coolant. Coolant was about 3 inches...
  4. 2005-2010 V6 Mustang Tech
    My wife had her car serviced and they reccomended a transmission flush so she did it. Now it slips in and out of gear. Anyone had experience with this?
  5. 4.6L Tech
    I have a 1998 Mustang GT with 85,500 miles and the coolant in the reservoir looks like it has dirt settled at the bottom! I wanted to know if I should use some kind of cleaner to remove these deposits and scale from my engine. What should I use? Can someone post the directions to properly do the...
  6. V6 Tech
    first off let me say the car did not have a thermostat when i opened the housing. okay. my car does not blow hot air, so we flushed the radiator and cooling system. ever since we flushed that stupid thing my car has overheated like crazy. so we put a thermostat in it. it STILL over heats, so...
Top