Ford Mustang Forum banner


  1. Wheel Fitment

    5.0L Tech
    I have a 1990 Fox Convertible 5.0, auto. Just did the ranger axle swap in the rear with new drums and I put the wheels from a 1994-2004 Ford Mustang "Bullitt" on. They are rubbing on the inner fender. What did I do wrong? Thanks for the help!
  2. 8-year project build -- Backfiring through intake, not idling.

    5.0L Tech
    Hi there. I have a 1988 Ford Mustang LX fox that has a 5.0 converted from speed density to mass air. This has been a long project for my dad and I, and recently we initially got it started for the very first time at zero degrees timing. It idled pretty well without stumbling around 1k, but...
  3. 1981 'AirRide'

    V6 Tech
    Hi there, and greetings from sunny London (UK) I have a 1981 Mustang over here, and have put it back on it's original 14" Steel Wheel, downside, it rides WAY to high! I'd simply lower it to fix these, but, we have so many harsh speed ramps, it's be horrid to get around, so, looking for an air...
  4. Foxtoberfest 2017 - 450+ Foxes

    5.0L Mustang Photos and Videos
  5. How much paint?

    5.0L Tech
    Hey everyone, I've got a 1989 Mustang LX in white and I'm looking to repaint it the same white. (Just freshen it up a bit). I'm trying to be as budget conscious as possible so I'm doing all the work myself. Only going to be painting the exterior. Not the engine bay, inside trunk area, or the...
  6. help with exhaust sound with cats

    5.0L Tech
    Hello im gathering the parts for a complete new exhaust system for my 88 fox 5.0 and my biggest issue is that I am not going to run off road pipes and every freaking youtube video shows exhaust systems with Off road h or x pipes. I will be installing some new BBK ceramic shorties this weekend...
  7. need help with 4cly t5 to t5-z build

    5.0L Tech
    Ok so my AOD is about to crap out on me and I wanna go 5spd. I have scavenged a t5 wc out of a 93 4cly fox. I am wanting to rebuild this thing with either regular v8 t5 gears or go to the z spec but I'm having a hard time finding the right parts and/or info on what is needed to get this done...
  8. problema electrico fox 84 (bobinas, modulo,encendido )

    Modernos 1974-2007
    Buenos Días , mi gente mi mustang fox 84 me ha presentado varias veces un problema con la bobina, bobina captadora , modulo y switchera , el problema es que me quema las bobinas tanto la seca como la captadora y aveces el modulo... ya cambie : - cableado desde el corta fuego. - bobina seca ( 3...
  9. 1991 Sunroof Help!

    5.0L Talk
    Hello folks, new here. I'm about at the end of my rope searching for this sunroof part and was wondering if maybe any of you could help. I'm looking for the plastic mounting block that attach the retaining clips to the sunroof. I've searched everywhere I can think of and all I can find are the...
  10. any picture of 90s speedo in 87-89 cars?

    5.0L Tech
    hello I have a chance to buy a 140MPH speedo thats out of a 90s Airbag fox for only 20 bucks! I know people say that there is a slight gap when installing these into our non air bag cars can anyone that has one installed please post a photo so i can see how bad this gap is? Thanks!
  11. My introduction

    Hey fellow mustang lovers. My name is Caleb Davidhizar. Im a 19 year old college student currently working on a music degree in voice performance. I own a rusty but trusty red 86 GT convertible. I affectionately named her rose. She is a very special to me being my first car. I have some...
  12. Project Mustang: 90/92 Mustang GT

    5.0L Talk
    Hello Im josh and I just wanted to share my foxbody project that has lasted wayyy too long. I really just wanted to share my project and maybe get insight as my project progresses. When i was 16 my father and i bought a 1990 mustang GT for $1000 from a guy in Toledo Ohio. The car appeared to...
  13. Cowl hood height

    5.0L Talk
    Im looking at cowl hood i want a very noticable cowl but not lose too much visability. Can amy one with a cowled fox give me thier opinions and height of their cowls. And also any recomendations for height i was thinking 4in. How would.that be on a street car? Its going on am 88lx when im done...
  14. 1992 Foxbody 2.3L new springs and shocks?

    2.3L Tech
    Hey, I'm going to be replacing my springs and shocks all around on my 1992 2.3L and possibly some control arms. My ride right now is TERRIBLE, I feel every single teeny little bump. I am 99% sure that the suspension hasn't been touched since it rolled out of the factory so I am hoping new parts...
  15. Glove Box Stuck Shut. Not Locked.

    5.0L Tech
    Please help, my 89 convertible is getting low on fuel and I can't get to the fuel door button because something is keeping the glove box latch from releasing. When I pull on the handle it moves, but does not work. Maybe some papers got jammed in there? I can actually get to the button with a key...
  16. 88 Mustang Carb back to Efi

    5.0L Tech
    So, The reverse has been covered a million times but, im not a mechanic so i wanted to get some clarity on what would be involved and what the best route might be. I picked up an 88 gt donor car with a good running motor so i should have all the parts i need but, what should be replaced with...
  17. How much should I pay for a 1992 mustang 331 stroker?

    5.0L Talk
    Hey what's going on, so I just sold my 98 cobra and I'm in the market for a new stang. I really would like a stroker built, and actually have an eye on a really nice one. I just want some more opinion on the price and what I should offer him. Here's the link to the add: 1992 mustang 331...
  18. Help finding missing Fox Sunroof Mount

    5.0L Tech
    Hey all, I'm looking for one of the two mounting assemblies for a fox sunroof. I have the right mount, and I have the latch to raise and lower, but I don't have the left assembly. The plastic that the clip slides inside is still on the car, but the whole part that attaches to the glass is...
  19. sn95 starter in a 1990 5.0

    5.0L Tech
    Okay, I'm going to the junkyard tomorrow for a starter to replace the old one in my '83 Mustang. Ever since I swapped the engine for a '90 5.0 it has had heat soak issues which cause it to crank poorly after the car has been running for a while. I've been told that a common solution is to take a...
  20. HELP! Lost 3rd and OD 1989 GT AOD

    5.0L Tech
    My 1989 Mustang GT with AOD transmission will not shift past 2nd gear. I had my heater core replaced by an off duty mechanic this morning. The guy really does seem to know what he is doing and works in a shop building pro street cars during the week. After leaving, my girlfriend, who was...