Ford Mustang Forum banner

front suspension

  1. Fastback 1965 front wheels rubbing to fender

    Classic Tech
    Hello Guys, I bougth an '65 fastback but think it's a mix of several thinks (I guess). I hope you all can help me out what from what "parts/accesoiries" this has been made. Chassis number is: 5R09C150558 control number: 388374 it has a manual 4 speed transmission I do have some specific...
  2. Ford 1998 mustang V6 to V8

    V6 Tech
    I have a few questions regarding front and rear suspension. I have a 98, will a k member swap from a GT or Cobra be necessary to swap a V8 in?? I am unsure whether the stock K member will work. Would getting a GT donor and swapping the front suspension be better than sticking with the stock V6...
  3. 620 Coil springs

    Classic Tech
    So I purchase 620 grab-a-trak coils.. I performed the shelby drop, replaced the entire front end with all new parts, UCA, LCA, antisway, etc... What I noticed upon reassembly was that I did not require to compress the 620 springs. Called MustangsPlus and they said this was norm and that the...
  4. double wishbone FRONT suspension.

    4.6L Tech
    So I've been looking around and it seems than in the newer 05 and up mustangs that it may be possible to swap your struts out for a lincoln ls front double wishbone suspension. Found this swap was actually done by ford racing to our generation FR500. But is it possible on a normal mustang. The...
  5. NEW 2014 V6 Front Suspension Noise

    2011 - 2014 V6 Mustang Tech
    Hey guys so I just bought a brand new 2014 v6 automatic. I've put 200 miles on it and now suddenly every time I go over a speed bump the front suspension makes a grinding noise. I don't notice it except for going over bumps. I've never owned a mustang before. Is this a common problem? I've made...
  6. Front wheel alignment issue????

    V6 Tech
    So I just bought a 99 mustang base model v-6 and I've noticed that the left front wheel sits very close to the read of the sidewall or fender. I'm not a professional at trying to figure out something, but I can do basic mechanic work. So....I thought I could solve this issue by maybe replacing...
  7. 1968 Front Suspension

    Classic Tech
    Hey, just got my 1968 Coupe 302 out and about during this wonderful spring weather. Had a borgeson power steering unit installed on it during the winter. Had a professional shop look over my work to make sure it was done correctly. I'm not too pleased with the borgeson unit because my steering...
  8. Ford Replaced Front LCA's, Now What...?

    2011 - 2014 Mustang GT Tech
    I have a 2011 mustang gt with 11k miles on it. The car has been making very obnoxious annoying noises when going over speed bumps as well as train tracks. Almost sounds like bad front struts. It is a squashing type sound. I know this has been discussed many times. Just picked up my car from...
  9. camber plates on a lowered LX convt

    5.0L Tech
    I just picked up a 93 lx 5.0 convt and ite been lowerd. the camber is way off. Enough that you can see it by just looking at the front of the car. i have checked the frame, there is some rot by the right strut tower and the front cradle bolt is rotted through the frame. i did some quick...
  10. Front Suspension Uneven Ride Height Help - 66 Mustang

    Classic Tech
    Hey guys, I have a 66 mustang that got alligned a couple months ago. I noticed the driver side sits about 1.5 - 3 inches lower than the passenger side. I thought maybe the springs or shocks were gone so I replaced the coil springs and front shocks but the height difference remains the same. Any...
  11. front suspension upper arm in 65

    Classic Talk
    Hi guys, My front suspension has started to make this screatching noise. Interesting enough increasing after I drive for a while (and when the engine is warm, but I do not see the connection here). I have not been able to pump any grease in the the shaft nipples, Nipples seem to be stuck...
  12. 1965 Mustang w/ V8 and I-6 Rear End. How do I identify my Front Sustpension?

    Classic Tech
    New owner of a 1965 Mustang with 302 engine, C4 transmission, but I-6 rear end. I have four bolt drums all the way around. I ASSUME the front is the original I-6 suspension, but I want to know how to identify everything. The previous owner must have changed some things to get the V8 into the...
  13. 2000 Mustang brakes release weird

    V6 Talk
    Hey, When I press down on my brakes firmly and then let my foot of I feel a clunk like the brakes are not releasing like they should. This only happens on the passenger front tire. Any ideas? Thank you
  14. Which 1967 mustang front suspension should I go with???

    Classic Tech
    I'm trying to get an idea of what front suspension I should look for. I plan on using the car as a weekend driver and something i can take out to the track as well and have a little fun. Also something that could make room for a big block in the future. So I want a suspension kit that fits both...