Ford Mustang Forum banner

fuel injectors

  1. 4.6L Tech
    Hi all. I'm pulling the heads off my '96 Cobra to fix a blown-out spark-plug hole. Pulled the fuel rail and injectors yesterday, and I'm thinking that at 160K miles I should probably replace the injectors. Anybody have a different opinion? I'm not going to spend a bunch of money to "upgrade"...
  2. 2.3L Tech
    So I just bought a 88' LX with a 2.3 4 cylinder engine. I get a lot of crap about it being crap and to swap or jun it and find a 5.0, but it's my baby and project car. I don't have money for a proper turbo setup, engine swap and there are no 5.0s around my area. So I'm trying to find ways to...
  3. V6 Tech
    I was recently given a 96 mustang that seemed to need just a little bit of work (which at 18 didn't seem like a bad deal). The only thing is its beginning to become a bit of a frustration, seems like every time one problem is fixed another one pops up. But basically, it now starts up very slowly...
  4. 5.0L Tech
    I have some questions about fuel injectors and matching mass air flow meter. I have a 1990 5.0 with stock injectors. My friend has a matching set of 21lb/hr @ 43psi impedance 11-18 ohms 70mm mass air flow off a cobra. Will this be compatible with my mustang computer and can my stock fuel pump work.
  5. 2.3L Tech
    On a hot summer day I was driving my 1990 Mustang 2.3 liter and didn't realize it was puking coolant all over the place. Little did I know I had a failed water pump, bad radiator, and my overflow jug was split in two, I had purchased the car about 3 months before this happened so I hadn't gotten...
  6. 5.0L Tech
    Hey guys, i'm looking to get a 347 short block over the winter and was just wondering what size injectors I should get if i'm going to be running my stock heads and intake for a little bit. I will be upgrading heads and intake at some point. Would 36# be a good size or should I go bigger?
  7. V6 Tech
    I was just curious for the easiest way to check these Ignition coil pack Fuel injectors Exhaust back pressure 2001 v6 3.8L basic
  8. 5.0L Tech
    How much horsepower can a stock fuel system handle on a 1990 5.0 and if I change the fuel injectors do I have to change the mass air sensor and the fuel pump
  9. 2011 - 2014 V6 Mustang Tech
    I was browsing Ebay and found a seller (txautoplex) who has 3 sets of aftermarket fuel injectors for the 3.7 listed: DeatschWerks 65lb hr Fuel Injectors Mustang V6 3.7L 2011-12 16U-00-0065-6 | eBay There's 42, 50, and 65lb if I'm correct. I know little in this area but thought I'd post about...
  10. V6 Tech
    I'm looking to upgrade the fuel injectors in my SN95. I've upgraded a lot of parts, but haven't touched the Fuel system. I'm wondering if there would be any gain to moving up a notch. I currently have the stock 14lb (grey) Injectors found in the stock sn95 'stangs. Here's the mod list. I'm...
  11. 5.0L Tech
    Hey guys! I got a granatelli MAF and now I cant install it without installing 24 lb inj. My question is does anyone know how to install the 24lb injectors? :shiny:
  12. 5.0L Tech
    :im confused:I'd like to install an intake system on my 95 Steeda Gt and would like it all BBk. I've read the forum on modifiying and install of the SSI intake. Just wondering if getting all the bells and whistles would do it as well. for example, getting the cold air intake, mass air meter...
  13. 5.0L Tech
    I bought my first 5 speed 1988 mustang gt convertible and it doesnt seem to have the torque i remember 5.0s having back in the day. The car WILL spin in first gear only. Im not powershifting or nothing but i am getting on it. Keep in mind this is how the car was when i bought it. I have only...
  14. 4.6L Tech
    I have a 2003 Mustang GT. I am currently trying to upgrade my coil packs to MSD and my fuel injectors from stock (pink) to the biggest size I can do without having to upgrade my fuel delivery system. I was told this upgrade would be a noticeable HP gain so I figured it's worth the shot. Ok first...
  15. 4.6L Tech
    Hey Guys... I am having some misfire issues with my 04 mustang GT... when my engine is at about 2000RPM my check engine light starts flashing and i can feel it drop a cylinder or sometimes 2. I first thought it was the coilovers since I have an ignition booster and that just killed them... but...
  16. 5.0L Tech
    Well upon removal of the ol' 5.0, i broke the tip off of one of my fuel injectors. i really don't want to spend $70 on a new injector so i figured i'd try and junkyard it. i know its not the best idea but if i can find a compatible injector then ill go for it. My stock injectors are the part...
  17. 5.0L Tech
    1991 mustang gt fuel injectors still not getting any fuel changed fuel pump,fuel filter,ignition control module and pick up gettin 54 lbs of fuel pressure to the rails can anyone help out the only other thing is the eec-iv?
  18. 5.0L Tech
    ok so v1 s-trim is finally in the mail and i need some injectors and a maf so do you guys like 90mm lightnings for draw thru setups or spend the money and get a pro-m(will run with 42 pound injectors) so when i install the blower with injectors and the maf and all the other stuff for the...
  19. 5.0L Tech
    I have very basic mods being installed so far...gt40p heads, cobra intake, 70mm TB, 76mm mass air, long tube headers, etc. I am also upgrading the fuel injectors to the Cobra 24lb ones and I am curious if my stock fuel pump will accomodate the new injectors. I don't really have the money to...
  20. 4.6L Tech
    I just bough my 2002 GT. It has had two previous owners. The guy i bought it from didn't do any of the work to the car. The original owner did all the work. It has a few bolt ons, C & L Performance cold air intake, throttle body, upper plenum, spacer, and Mass Airflow Sensor. Only problem is, he...
Top