Ford Mustang Forum banner

fuel line

  1. Change you fuel filters!!! Pic Included.

    2005-2010 Mustang Talk
    Well, i bought my 2006 v6 with 141,000 miles, now 147,000. I have changed the cabin filter, air filter, fluids...etc. I got to thinking about changing the fuel filter as I did not know where it had last been replaced. I bought an new one and changed it.....I am beginning to think it has never...
  2. Braided fuel lines on the 4.0

    2005-2010 V6 Mustang Tech
    I've seen these steel braided fuel lines around on other cars and they look so much better then the stock black rubber lines. I'm currently putting my valve covers and intake manifold back in since I painted them and want to top it off with a new look on the lines. I've yet to find any articles...
  3. Fuel line help needed

    Classic Tech
    Guys, i can't determine which fuel lines i should be looking at for a 70 Mach 1 351C 2V (no ac) Dearborn . V8 - 3/8" (2 Pc.) W/ Factory Rear Sway Bar (not sure where i should be looking for the Sway bar) anyone have a pic? V8 - 3/8" (2 Pc.) any help would be great. tadds
  4. 2001 v6 basic, 3 obd codes, po125,po453,po301

    V6 Tech
    I know what the basic idea of what all the codes mean, but can't find the problem. It started with po125, po453. It seemed like the car would rev on its own while at a stop. Gas shoots out while filling the tank at normal speed, gotta go slow. Fuel gauge never reads full. Car stays on cold. A...
  5. 1985 Mustang Charcoal Canister and vent lines. Needed?

    5.0L Tech
    I am redoing the fuel lines on my 1985 foxbody and I want to know if it is worth keeping the charcoal canister and vent line. I've heard the canister is for recycling fumes back into the engine and prevents them from escaping into the atmosphere. Are the recycled fumes useful for the engine or...
  6. 1989 Mustang GT fuel line help

    5.0L Tech
    Hello everyone, i just recieved a 1989 mustang gt, 5 speed. So far i know it needs a new fuel line, the RETURN line, and was wondering if this is a job I could do myself and if i could recieve any tips or help with this?
  7. Mounting a Holley Blue fuel pump on 351w 1967 Mustang

    Classic Tech
    Hello everyone, I have had problems with my fuel system lately. It seems to be drawing air but not leaking. This is causing me to stall after a long idle. I even tested by sucking on the hose and can see air bubbles in the glass filter. I currently am running some performance mech. fuel pump. I...
  8. Can you splice a high pressure fuel line?

    V6 Tech
    So I ended up cutting a fuel line. The line from the Fuel Rail to the Main Fuel. (see photo 2) 2000, 3.8L I have two questions (ok, maybe three) :) 1. Can one splice a high pressure fuel line? Incase I can't see questions 2 and 3. thanks. 2. If I need to buy the entire line...does it...
  9. 1972 Mustang Grande not turning over?

    Classic Tech
    I do not have gas flowing through the fuel line. I put 2 new gallons into the car the day before, but the fuel is not flowing. Can I use an air line to blow the line clear? Or do I have to replace the entire line? Thank you
  10. Ayuda con empaque de tanque de gasolina... mustang 72

    Clasicos 1964-1973
    Que onda raza, pues yo soy nuevo aqui, de paso me presento, soy de mty y tengo un mustang 72 hard top, ya lo tenia desde hace tiempo pero hasta ahorita lo estoy restaurando, asi que de ahora en delante les voy a poner gorro con preguntas y consejos... Para empezar, ya que mi carro no prendia...
  11. Question On Fuel Lines

    2005-2010 Mustang GT Tech
    What does AN mean when they talk about fuel lines, it says like -6AN through -16AN. Also what size fuel lines do a 2006 mustang have
  12. 2006 Mustang GT Fuel Filter Coupling Broke. Is there a replacement?

    2005-2010 Mustang GT Tech
    I was changing the fuel filter for the first time and cracked the quick release tab, The ford dealer told me i have to buy the whole fuel line which is 150 bucks, is there any replacement coupling i could buy or do i have to get a new line
  13. Stripped Fuel Inlet

    Classic Tech
    The fuel inlet on my Autolite 4100 is stripped. Is there a remedy other than taking the carb off and sending it out? I've heard that Pony carbs does a great job but I can thing of other ways to spend $275.00. Any help would be appreciated
  14. 1996 Mustang 4.6 GT Starting Problem

    4.6L Tech
    My 96 GT isn't starting right away like it should, particularly after it's been running/driving. I have to crank it for a second or two, shut the key off, and re-crank to get it started. I hypothesize that it's a fuel delivery problem, perhaps a pinhole or crack in the fuel line. Has anyone...
Top