Ford Mustang Forum banner

grinding

  1. L

    2005-2010 Mustang GT Tech
    Yu
  2. Classic Tech
    Hi everyone. I drove my car to work this morning with no issues, but when I went to start the car after work I instead heard this grinding noise. In the video the grinding noise stops when I let off the ignition, but before this I had to run around, pop the hood, and hit the starter solenoid to...
  3. 4.6L Tech
    I have an automatic 98 GT, there's a grinding noise coming from underneath center console/front passenger area whenever i make a hard left turn(only when going a kind of fast) or go up a driveway turning left. The faster i go up the driveways the louder the noise. I have no problems making right...
  4. 5.0L Tech
    Hey guys I just purchased a 1991 5.0 LX Mustang. The car is awesome it just as a few weird quirks I can't seem to figure out and am wondering if you could help me figure this out. So I'm having a weird transmission buzz/grinding noise when I coast in neutral or with the clutch in while being...
  5. 2005-2010 V6 Mustang Tech
    Ok, I am going to try and explain this the best I can. I have a 2005 V6 Manual Trans. I JUST got this thing back from a local shop that did the timing set for me. The shop owner told me he looked over my clutch since they had to pull the entire motor to do this job, and said it looked good, and...
  6. 4.6L Tech
    Hey guys, So, today my Mustang started making a weird noise at the clutch, and I can't figure it out (link to video below). I just installed a new Exedy prostreet kit from American Muscle, complete with new throw out bearing and pilot bearing, along with pressure plate assembly and new billet...
  7. V6 Tech
    I have a 2001 v6 and last spring I blew the clutch out. I replaced the clutch myself (first time). I noticed that after i replaced my clutch a couple things happened. When car is idling with clutch not pressed in I get a squeak. (throwout bearing). However I also noticed that when getting on the...
  8. 2.3L Tech
    If I turn the car on a gear, it wants to go. Pressing the clutch doesn't really do much. I a clutch kit which came with everything to replace. The clutch fork looked kind of bad, could that be the problem? Also is there any good visual tutorial online on how to replace the clutch because maybe I...
  9. 2011 - 2014 Mustang GT Tech
    Just signed up, looking for help/advice. I have a 2011 Mustang GT Brembo with 3.73 rear and carbon fiber LSD clutch plates (all factory, car is 100% as it came from Ford). Around 32k the pinion seal went bad for no apparent reason. My dealership replaced it under warranty, but did NOT replace...
  10. Introductions
    My mustang has a 302 out of a 78' f-100 and we had replaced to starter on it. The starter we got was a remaned starter and once we shimmed it, it worked fine but over time it started making a grinding noise more and more every time we started it. 2 times it wouldnt engage the flyywheel at all...
  11. 4.6L Tech
    Hey guys, I have a 2000 GT with 158,xxx miles and just within the last week or two I have noticed a grinding sound coming from my rear axel area while driving anywhere between 15-30 mph. After that I can't hear it, but that could maybe just be the road noise kicking in. Could this just be a sign...
  12. 2005-2010 Mustang GT Tech
    Alright so to start off i have an 09 gt all stock and has been in a bad accident with previous owner(s). For a while now i have herd a grinding noice from the rear drivers corner of my car, i checked out around the wheel and found grooves worn into my caliper anchor. Since then i have replaced...
  13. 4.6L Tech
    Hey guys, My 1998 Mustang GT Makes a grinding type noise when i take off in first. It also grinds when I put it in reverse. It's a 5spd. and has the stock clutch. the car has 69K on it and was always well maintained. thanks for your time!
  14. 5.0L Tech
    Just recently put a fresh new engine in my car and after putting everything back together with a new throwout bearing and king cobra stage 2 clutch and new flywheel it will not shift into 1st or reverse. right after the build it was hard going into all gears then started grinding real bad into...
  15. 2011-2014 Mustang Talk
    I've been having issues with the 1-2 shift in my car. When shifting from 1-2 at high rpms (I am shifting correctly) the car won't get into 2nd all the way and the gear will grind :nono: Will a new shifter and bracket help with this problem? Thanks as always
  16. 2005-2010 Mustang GT Tech
    Hey guys, I really need some help! I have a 2005 Mustang GT, manual transmission with about 146k miles on it. The problem is that my 2nd-3rd gear shift almost always grinds, even if the clutch is fully depressed. I understand this is a synchro problem, but the real question is, I never abused...
  17. 4.6L Tech
    Hey guys, I drove my 1998 gt home from school today. It's about an hour and fifteen minute drive (mostly highway). When i got off the highway and made left or right turns i started to hear grinding and rubbing in the middle and rear of the car. I checked under the car and nothing was loose or...
  18. 4.6L Tech
    I have a 2000 Mustang GT with 152,000 miles and a manual tranny. For the longest time my car has randomly had a LOUD grinding noise when downshifting from 5th to 4th. Very rarely it also grinds from 3rd to 4th. And about once a day, I can't get it in reverse without running through the gears and...
  19. 5.0L Tech
    I had my transmission rebuilt not too long ago (twice actually) because of grinding going into 3rd and 4th gears due to a bad synchronizer. After the first rebuild I had all sorts of problems out of it, I'm not sure what happened, but something went wrong during the rebuild. The guy rebuilt it...
  20. 2011 - 2014 Mustang GT Tech
    Hello, my mustang recently developed a winding sound. At startup, there's nothing.. then when I apply the break, and/or turn the wheel, the sound comes and also gets more severe as I apply more of the break, and or turn the wheel further. After 20min of driving and engine has warmed up to...
Top