Ford Mustang Forum banner

handling

  1. Suspension

    4.6L Talk
    Hi, it is my first time here and i am looking for a little advice. I have a 2001 Bullitt with some modifications on it. I currently have the eibach sport system suspension package on my car, but am, looking to change it. Any advice on the best handling packages?
  2. 3/4" Rear Sway Bar Opinions

    Classic Tech
    Hey all, I am contemplating a 3/4" rear sway bar. I have on the '65 subframe connectors, a 1 inch front sway bar, gas a just shocks all around, 1 inch 620# lowering springs up front and 1 inch lowering leafs in the back, etc. I am hoping for your opinions on running a rear sway bar on a car...
  3. 1965 Mustang Rear Sway Bar Opinions

    Classic Tech
    Hey all, I want a rear sway bar, I've got a 1 inch sway bar up front, subframe connectors, KYB Gas-A-Just shocks, 1 inch lowering springs (620# up front and lowering leaf springs in the back), poly bushings, etc, but I am unsure about a few things: stiffness, are they worth it, benefits...
  4. 1969 Mustang Suspension Upgrade?

    Classic Tech
    So one of the first things I'm going to do with my mustang on my own is suspension work. However, I don't know where to start. Is it a good idea to just get a suspension kit. I just want to freshen up and modernize the suspension so it handles corners well and is more fun to drive :) I'm...
  5. 2006 gt - best springs??

    2005-2010 Mustang GT Tech
    I have a 2006 mustang gt with a stock suspension except a saleen sway bar... Bought a set of tokico d-specs off craigslist for an amazing $200, and now i want to look at a set of springs, i want to have a good rideability, but also i want to feel a good handling upgrade. I've looked at LMR's SVE...
  6. 1965 Mustang Front Sway Bar

    Classic Tech
    Hey all, I want to go with a bigger sway bar for the handling benefits. However, I am unsure with what size to go with, car is a weekend cruiser and is not tracked. Was wondering to hear your experiences with different sized sway bars. I've been thinking about the Addco 1" but I dont know if...
  7. Whiteline Panhard Bar/ Rear Brace

    2011-2014 Mustang Talk
    For anyone looking for an adjustable panhard bar and rear brace, Whiteline is the way to go! Thanks to them producing an outstanding product, I noticed an immediate difference in handling characteristics. Much more stable under hard cornering, stiffer rear suspension, and the axle is finally...
  8. suspension gets upset changing lanes and braking

    2011 - 2014 V6 Mustang Tech
    I did some searches and couldn't find any related threads on this. Traffic around here is horrible, and several times now while trying to get around slow traffic I've found myself having to hit my brakes while changing lanes. My suspension does not like that one bit, it's a little bit scary the...
  9. Performance & Handling Improvement

    Introductions
    Hey, just got a stock v6 with 140,000( allot ya i know) on it. Car runs great and feels good. I want to improve the horsepower(speed,air flow etc) and handling of the car, maybe more in the future. Whats the best type of exhaust kit that will sound good with a v6. Any recommendations on where i...
  10. Performance v Handling

    2005-2010 Mustang Talk
    What up people… Just purchased my 2006 legend lime green auto V6 Stang last month and love it. I am dying to begin the never ending uncontrollable downward spiral of mods! Being that this is my first Stang and is a different beast (pun intended) than other vehicles I have owned, where would be...
  11. How to perform a shelby drop?

    2005-2010 Mustang GT Tech
    hey all so i have been looking to modify my suspension now, i just put in new gas shocks from Monroe. what other upgrades do you think i should or could do? also i hear the shelby or arning drop gives you the best front end height for handling, i also understand that all you have to do is drill...
  12. Performing an arning drop?

    2005-2010 Mustang GT Tech
    hey all so i have been looking to modify my suspension now, i just put in new gas shocks from Monroe. what other upgrades do you think i should or could do? also i hear the shelby or arning drop gives you the best front end height for handling, i also understand that all you have to do is drill...
  13. Upper control arm/front suspension question..

    Classic Tech
    289, t5, 14 inch cregars, SSBC front disk brakes, 600 CFM edlebrock carb... I have a question for all you enthusiasts out there that know what the hell they are doing, unlike myself. So, I was reading an article on lowering the control arm one inch for better corning and less body roll. Here...
  14. 2010 mustang v6 from sway bar mod

    2005-2010 V6 Mustang Tech
    I have a 2010 mustang v6, with a few light mods (working myself towards a tuner in the next month or so), and I was wondering if I could install a front sway bar off of a 05-09 gt to improve handling and help to eliminate understeer during autocross? A shop in my town is selling a fresh take off...
  15. looking to upgrade my suspension

    2005-2010 Mustang Talk
    I'm looking to redo my suspension on my 09 gt the stock is lets say not so good i bought ford racing k springs awhile back but never put them on because I've been waiting to see what else i should do while the spring get put on (shocks, control arms, sway bars etc) I've had my heart set on the...
  16. Stabilization ???

    4.6L Tech
    So I Have ordered a Strut tower brace and I just ordered my new wheels which are Black chrome FR500's staggered 18x9/19x10 and they will be wrapped in Nitto 555's. Now I am wondering what else i can do to help my stabilization and handling. any help would be awesome, thanks.
  17. Is bigger always better?

    2005-2010 V6 Mustang Tech
    I am looking for new rims for my 2007 and have been hearing a lot of different things about rim sizes. Im pretty sure i only want to go as big as an 18 in rim but if i go to a 20 would that do anything to performance and handling. No one i know will give me a straight response haha.
  18. Lowering Springs

    2011 - 2014 V6 Mustang Tech
    Has anyone lowered their car to improve handling? What would you guys recommend to use for lowering the car?
  19. 1995 GT Upgrades

    5.0L Tech
    Hey, just recently bought a 95 GT and it is in decent condition. I'm looking to upgrade everything, speed, handling, acceleration, etc. Any ideas on what, where, and what brand to get? Thanks
  20. Suspension Upgrade - Help?

    V6 Tech
    My ball joints need to be replaced as well as the springs, struts, and shocks. From this place -- Eibach Pro-System Plus Kit -- I can get that for the lowest price I've seen anywhere ($654.40). If I call to order I get another 5% off of the total and still have it shipped free of charge. I...
Top