Ford Mustang Forum banner

harness

  1. Classic Tech
    I am a college student on a tight budget and the wiring harness in my mustang has more dead ends than I can count. I have countless problems getting my stereo, heater, and wipers to work and once one is fixed the others fail. Wires also constantly fall off the fuse box so I need an upgrade. The...
  2. 5.0L Talk
    i have a 1989 5.0 and replacing the seats and reg seat belts with racing seats and 4 point harness but i dont have a roll cage and dont really want to buy one if i dont need to. is there any way i can safley install the 4 point harness without the roll cage or roll bar. i found just the roll bar...
  3. Classic Tech
    Hey all, My wiring is all replaced with the American Autowire 66 Mustang kit, and it looks great. Only problem is, they didnt give me any wires for the gauges. Call me paranoid for not wanting to have new wires all the way through, but eh. So, here's the question. Is there any place that...
  4. Classic Tech
    I am looking to upgrade my wiring harness to a new aftermarket harness. My current harness has so many dead ends and circuits that go nowhere. A lot of the insulation has holes in it as well so I feel it is unsafe. I cant even trace most of the wires because black paint is covering the color of...
  5. 2005-2010 Mustang GT Tech
    My 2006 GT Convertible has had a problem for the last 8 months or so. I have replaced the bulb with no success. I can play with the harness and get it to come back to full intensity as well as hit the headlight cover with my "Fonzy" touch and get it to come up. I think it is most likely the...
  6. 5.0L Talk
    I would like to put racing style seats in my 1991 GT convertible. I am soliciting opinions. Enzo, Corbeau, other? Pros and cons? Every opinion counts. The Enzo seats are cheaper from Mr. BodyKit, but Corbeau has the name and reputation that I heard of. Or is there another manufacturer out...
  7. SVT Cobra Tech
    I am replacing the fog lights on my 2003 Cobra convertable after a minor bumper accident and the factory parts were removed. I need to know where to look on the front end chassis for the spot where the fog light harness plugs in. Does anyone have a picture or description that can help me...
  8. V6 Tech
    I am working on installing fog lights on my 2003 V6 but before i tackled the project i was trying to get all my information together. I was thinking i would need a wiring harness, a new dash button, electronic relay, and of course the lamps themselves and their install hardware. I got a hold of...
  9. 2005-2010 Mustang GT Tech
    I replaced my left-front headlight about a month ago due to it being dim and everything was fine, but then a few nights ago, I had the same problem. The light is about 25% of the intensity of the other headlight. I can move the wire harness around a bit and get the light to come back to regular...
  10. 5.0L Tech
    I have a 1989 LX Hatchback Body. It is a 5.0 Car. I bought it with hacked dash/main harness and no ECU Harness. I am putting a 5.0 EFI in it. I need some help from someone more familiar than I am I have a 1990 LX 5.0 ECU and ECU Harness. It has an extra plug where it Plugs into the Body...
  11. Classic Tech
    The wiring in my 65 have dried out and I am seeing increasing faults in lights etc. My car was restored except of the wiring. How involved would the work be to completely overhaul the wiring? Can this be done without ripping the entire care apart? Would this be costly operation if I have...
  12. Audio, Video, Navigation & Alarms
    hi is the PAC 127C2R-FRD1 a necessary component for my mustang? I am about to get a AVIC F700bt or 900bt and i was wondering if i need the replacment interface and what does it actually do?
  13. Introductions
    Hello all! I am new to these type of websites but have found them helpful. I had a wiring harness small fire due to my mechanics running the wiring between the radiator and the front frame of the car. I have a large cam so the vibration rubbed the wires raw. I found a 1975 harness and have...
  14. 5.0L Tech
    As part of using our Mustang for a Factory Five kit build, we need to collect the wiring harnesses. I worked on the left wiring harness, all the way down from the driver's side firewall, over to the passenger's side headlights up to the alternator. For the life of me I couldn't figure out how...
  15. 2005-2010 Mustang Talk
    I wanted the option to be able to "return to stock" in the future, so I put my own spin on the Trunk release button. It's mounted on the E-Brake access cover in the center console. I also added some Cold Cathode Flourescent lights to the trunk (made for computers) while I was at it... Let me...
  16. 5.0L Tech
    wiring help ....... i have a 1992 mustang gt convertible ... harness was burnt car caught fire ..... i cut the plug off another harness and rewired it by one the diagrams..... i have 2 wires left over a solid gray and white/black or its white/purple cant really tell ..... but car gets fire ...
Top