Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 24 Results
  1. SVT Cobra Tech
    Hi guys. I have a bunch of stuff removed from my ‘96 Cobra to pull the driver’s-side head. What needs to be done to disconnect the exhaust manifold? The factory manual procedure is outrageous. Thanks for any insight. Gavin
  2. SVT Cobra Tech
    Need to remove head without moving pistons? Hi all. I'll try to make this efficient. My '96 Cobra suffered the famous blown-out spark-plug problem years ago. A Ford dealer put a helicoil in the hole and as far as I knew, all was well. A few months ago that cylinder (#6) started misfiring. I...
  3. 5.0L Tech
    I was at pull a part yesterday and noticed a Ford Explorer with the heads,intake,and throttle body intact and in perfect shape.Is this a good setup to use as far as a small power increase for little money?What would I need to do to my stock throttle cable assembly,to make it hookup to the...
  4. Classic Tech
    Hey all, I was pulling up to the house the other day, just coasting it in, 2nd gear, clutch engaged, no throttle, when all of a sudden I hear a ticking/popping/rattling noise. Now it wont idle without a little throttle, feels like its missing a cylinder, and I'm getting a very consistent "pop...
  5. V6 Tech
    Hello, I have a 1995 V6. The coolant in my car slowly disappears. It is not leaking on the pavement, its not in the oil, and it does not look like its coming out of the exhaust but I suspect it is. I did a pressure test (used a vacuum and gauge on the radiator) and the cooling system held...
  6. Classic Tech
    I'm putting a head on an ho motor for my 68 coupe . With new head bolts do they need any sealant or is the white crap already on the bolts fine? Also do the intake bolts need any sealant? I only trust Indian head so wod putting that on the bolts hurt or help or do nothing ? Thanks -Isaac
  7. V6 Tech
    Hey guys doing the windstar intake and split port swap on my 94 mustang, cann i use those mls gaskets that windstar has, or use the stock mustang head gasket? Can i order a mustang mls gasket for 94 mustangs? Or would i have to order a windstar one and still be the sameee thing? Please i need a...
  8. 4.6L Tech
    I just bought a new head unit and I need to remove the antenna from the stock h/u. How do I go about doing this?
  9. 4.6L Tech
    I plan on purchasing an aftermarket HU for my 2001 GT. I have the Mach 460 sound system. I'm looking for a cheap, good quality, HU that will work with the current amps as well as being able to add another for some subs. Thanks! :racer
  10. V6 Tech
    So i finally got around to seafoaming my 99 mustang today and when i was filling the vacuum line with the stuff, i noticed it was smoking alot around the front of the engine on the side with the oil fill (left side) i coun't exactly see where it was coming from, somewhere below the header i...
  11. V6 Tech
    so im replacing my head gasket and in doing so i needed to get the cylinder head milled. when taking off the cylinder head it has two spacers (one on each side). well when i got it back from being milled the spacer was gone. (couldnt get it off before i took it in). where can i find a new one?
  12. 4.6L Tech
    I have a 1968 mustang 302 8cylinder that has a cylinder problem, the number three cylinder doesnt fire after a overhaul in the engine, but i didnt replace anything in the heads as in valves, valve springs, ect. Could this be the problem that there is a smashed exhaust valve?????
  13. 5.0L Tech
    My local engine. Shop tells me. That. DooE windsor heads stock will out flow my gt40 heads? Can anybody help out here
  14. 5.0L Talk
    I am looking for halo headrests for my 90 mustang vert. They need to be in good shape overall no cracks or chunks missing but the color doesnt matter they have to be dyed white anyway. I would buy either netted or unnetted you can post here or email me directly at [email protected] with what...
  15. 2.3L Tech
    hello everyone i recently replaced my headlamp housings & installed a HID kit & have some across a few problems. 1. that grey cylinder thing that twist onto the back of the housing to lock the headlight bulb in place? i broke the fins on the inside. where can i buy that grey piece at i cant find...
  16. 2.3L Tech
    I have a 1989 Ford Mustang LX & i cant figure out for the life of me how to get my headllight housing out, i brought a replacement 6 piece set to go in place of the stock light housings but i cant get them out. I see all the screws that hold the light in & like 5 or 6 stick out behind the engine...
  17. 4.6L Talk
    I have a 2000 mustang and the dash kit for the head unit is only a single din do you think it would work to purchase a 2001-2004 double din dash kit so I could have a double din sized head unit
  18. 4.6L Tech
    I have a 98 GT. When I got it the motor was shot so I swapped it with a 98 Expedition 4.6L, after swapping many items from the Mustang motor. I put the PI intake and used the gaskets that I had for the PI intake but I think this is where my issues start. I got it running and now it is leaking...
  19. 2.3L Tech
    I recently ordered head bolts for my 85.5 svo engine from summit racing. The bolts were described to work for ALL 2.3 engines from 74-93. I put my head on the block and dropped the bolts into the holes to realize that the thread on the old bolts were 1/3 the length of the new bolts so i now...
1-19 of 24 Results