headlight

So I've decided to put in relays for the headlights. One to alleviate some work placed on the headlight switch and two to get the lights brighter. I've read up, and understand how to wire the relays, easy enough. I've opened up the loom near the radiator core support just below the voltage...

Hello I have bought my 2012 v6 mustang 2 weeks ago and I am looking forward modifying it, I bought these 2013 headlights with no bulbs or xenon modules, bought custom bulbs and modules and it works in low beam that's not the problem. The problem is if you shift the knob to the high beam the...

Hello, I have a 2000 Mustang ragtop that I purchased recently, the wipers only work on "High" so every other position does nothing. However I did not notice until now, that when the headlights are on (switch pulled all the way out) and you either turn the wipers on to High mode the Interior...

hello, just rewired the entire car--- 1966 mustang replaced turn signal harness new headlight harness new tail light harness new alternator harness new underdash harness new gauge harness when I turn on the headlights on ..the driving lights go off. I had an issue with the turn signals and...

I'm Having a problem with blown headlights in my 65 coupe. Every time I rev the engine my interior lights get brighter, and my headlights will get brighter and blow, on high or low beam it doesn't matter which one. My set up is as follows: stock 65 mustang wiring harness under the hood, halogen...

my 1994 mustang is having issues again...... I have put new headlights on the car recently I have been having problems with them cutting out and then affter a short period of time turn right back on. they dont dim or flicker they are off and on period. I still have my blinkers and flashers just...

Hi everyone, I have noticed that my passenger side headlight on my 2005 V6 is always misted up and the drivers side headlight is fine and never seems to mist up. I thought that maybe the drivers side stays clear because the intake system is that side and I thought that maybe more air flows...

Hey so I just barely installed some brand new LED tail light inserts from CJ Pony Parts. Link: Mustang Led Taillight Assembly Each 1967-1968 | CJ Pony Parts A while ago I watched a video on how to install them and I remember the guy installing them saying that you had to replace the turn...

Looking to chamge the stock headlamps. Has anybody tried these aftermarket headlights from Ipex Motoring? Or seen them on another car? Wondering how they look and how the light output is. Thanks. 2010 2013 Ford Mustang "Titanium Shiny Black" Halo LED Projector Head Light Lamp | eBay

I recently bought a new plug for my headlight switch on my 92 GT. i cut my wires so i can splice them into the new wires but when I got everything together half of my stuff like park lights and dash lights didn't work. does anyone have a diagram that shows what wires do what on the car?

Hello, I have a 2007 v6 Mustang with the Pony package and I was wondering if the fog lights already equipped (As shown here right off google - http://www.allfordmustangs.com/forums/attachments/2005-2010-v6-mustang-tech/44579d1210802811-2007-mustang-pony-package-custom-fog-lights-100_2070.jpg)...

Hi all, this is my first time posting here.. I was just wondering if anyone had some high resolution photos of the 2013 mustang headlights (close ups to the details) they could share with me? I am just looking for some reference photos and it would be really helpful and much appreciated!

Hey, sorting out those wiring issues ive been having, actually bought a new steering column for simplicity and time and it should arrive today late afternoon. But because now ill have the tail light and blinker assembly hooked up i am going to focus on the head light situation. Looking at this...

hi all! i just bought my first foxbody this week which started life as a 2.3 automatic lx,well the p.o. swapped in a 5.0 and never finished it this is were i come in everything works on the car but the headlights and turn signals,ive done searches for hours and cant find a good headlight wiring...

I just recently bought my 2000 Mustang, and I noticed the driver's headlight was higher than the passenger side. I thought it would be as easy as just turning the adjuster screw with a 6mm allen wrench, but when I did the screw turned freely without resistance and the headlight tilt did not...

I just had 35w 6000k HIDs installed with my smoked projectors. Bought the HIDs from stangmods.com and the projectors from AM. After few weeks of using them, I noticed a small distortion on the center of both lenses as if it had slightly melted. It was not there before I installed the HIDs...

I have a 2000 Mustang Base Convertible with some headlight issues and I'm hoping that one of you can help. First of all, the low-beams turn on and off repeatedly; they stay on for about a minute when you first start the car, but they soon start turning on and off every 3-8 seconds with an...

Well to start things off, I have dual beam HID headlights. I also have HID fog lights. The problem I am having is that the headlight will not shut off. Even with the light switch off, the will remain on. The only way they shut off is when the car is off. They even turn on on ON (if that makes...

Hi all, Looking to get a headlamps & front flasher lamps conversion kit to HID (not just the bulb, entire housing), as well as the HID conversion kit for the fog lamps (again, bulb and housing). Refer to these 2010+ Mustang Smoked Turn Signal & Bulb Package and StangMods Matte Black Dual Halo...

lately I've run into issues with my car not starting (at the worst possible times, like in an automatic carwash) and have played around with jumping the solenoid (because I thought that was the issue) among other things. I now realize that I basically need to replace most of my wiring, since...