Ford Mustang Forum banner

hood

  1. Classic Tech
    Hello Everyone, I have become so frustrated with trying to align my hood properly.. I recently just finished painting the engine bay and re-installed the engine (with a lot of new/upgraded parts) and the last thing I need to do is reinstall this damn hood. This is the same hood/hinges I had on...
  2. 2005-2010 Mustang Talk
    Hey all! --EDIT-- After 2 weeks of looking on and off, of course I locate it right after posting: It seems to be a Xenon 12138 Hood Scoop. Also added a few terrible low light photos of the edges, where it doesn't look great. Kinda thinking removing it is going to result in a repaint...
  3. 2011-2014 Mustang Talk
    The hard Florida water from car washes has put white stains in my 13 hood insulator mostly around the heat extractors Solutions I can think of are spraying it with black fabric stain (we used to use that 14 years ago when I was into imports) removal of blanket entirely. use truck bed liner...
  4. 2011 - 2014 V6 Mustang Tech
    I'm starting this post to add myself to the list of people who have had this issue. cryin.gif I know there is no permanent fix. But I'm going to take it in and see what they say anyway. I will update after. On the upside I haven't had the ABS freak out lately.
  5. 2011-2014 Mustang Talk
    Due to the oxidation problem, which finally chipped the paint, I've decided to get a new hood. Just wondering how others have fared replacing their hoods and where you ordered from (besides the obvious AM and LMR). I am looking for something that looks very similar to the OEM hood but would...
  6. 2011-2014 Mustang Talk
    Will the 10-12 Shelby GT500 stock hood fit a 12 GT without issues?
  7. Classic Tech
    Hi There everybody, Does somebody can help me or have an Hood Tachometer for my Ford 1970 Coupe with an 351Cleveland ? It don't have to be new, used is good to. I search already a long time for a Tachometer... Best Regards, Ken
  8. 4.6L Talk
    I was considering purchasing the 96 Cobra hood from CL Pony Parts. Has anyone purchased one of these? How is the quality? How is the fit? I saw an aftermarket hood that did not clear the factory strut tower brace, and i don't want to buy junk or something that will not fit properly. Any...
  9. 2011-2014 Mustang Talk
    My first mod- Just a simple PlastiDip job on the hood grilles. I did this on my gloss black GT Here is the process I went through (sorry for the quality of photos!): 1. Remove the under hood pins. 2. Remove bolt holding on the grille (not sure the size, I just used an adjustable wrench to...
  10. 4.6L Tech
    This spring was sitting in between the hood and the cowl vent. I attached an image of it. I believe it's always been there since I've had the car. I'd notice it every now and then and thought it was attached somehow and was holding something together. For some reason today I decided to check...
  11. 2011-2014 Mustang Talk
    Alright guys so I've recently had some hail damage to the car, the hood took most of the brunt and now it going to get fix in the body shop, I'm thinking of just having the hood replace and painted and have that instead of having them fix the dents, shop said they would do it, so that's a win...
  12. 2005-2010 Mustang GT Tech
    So I have The Cervini Ram Air hood, and a set of functional hood pins. I'm thinking that the pins need to be towards the outside of the hood (as the center is raised significantly), but looking under the hood I'm not sure where to mount the pin post. Has anyone with this hood mounted pins on...
  13. 2011 - 2014 V6 Mustang Tech
    Hi, could you give me some help for my 2012 V6 Convertible Premium? I like to swap my front grill and hood, but I have not enough technical information. I like this style: Ford Mustang V6 GT to GT500 Conversion Kit w/ Black Mamba Hood 2010-2014 But this kit i very expensive and maybe too...
  14. 2005-2010 Mustang Talk
    Hi All, Long time reader, first time poster. So the story is that I have recently been able begin modifying my 06 convertible, and I just purchased a Roush Hood Scoop off fleebay, but unfortunately the seller didn't send/have the installation pattern. I was wondering if anyone who has...
  15. Classic Tech
    Hey all, I am installing a new Edelbrock Performer intake and Edelbrock 600cfm carb on top of a 351w in a 1965 mustang. The hood is one of those eleanor style hoods but underneath doesn't really seem to provide much more space than the stock hood. My question is: before I install this...
  16. 5.0L Talk
    Im looking at cowl hood i want a very noticable cowl but not lose too much visability. Can amy one with a cowled fox give me thier opinions and height of their cowls. And also any recomendations for height i was thinking 4in. How would.that be on a street car? Its going on am 88lx when im done...
  17. V6 Tech
    So this is my first post..so I'll try my best. I just bought my 2003 mustang from a private party and noticed that the hood closes but you can still pull it up to un-hinge the latch without pulling the latch from inside the car first.So when I'm driving on freeway the hood is shaking since its...
  18. 2005-2010 Mustang Talk
    Hey everyone, I'm returning the car as close to stock as possible and that means putting the GT hood on (which has the appearance package fake scoop). Does anyone know where I can order the honeycomb insert that sits in this scoop from factory? I've searched and searched to no avail. Thanks in...
  19. Classic Tech
    Hi everyone, This is my first post here in allformustang.com. I'm from France and I just bought a 1968 Mustang GT390. I am currently in the process of restoring/fixing this beauty. So that's why I'm asking for your help/advice about some parts that I don't understand. - I have a round plastic...
  20. V6 Tech
    Forgive me if I'm in the wrong place. I'm new. I have a 1996 3.8 V6 and was wondering, could I remove the freeze plugs from the upper plenum and run a couple tubes from the two plug spots to the Hood inserts to act as a sort of cold air intake? I've heard they would both need MAF sensors and...
Top