Ford Mustang Forum banner

ignition system

  1. 5.0L Tech
    i have a 351w next upgrade is going to be ingnition. not real sure what to go with right now i have a convertion hei distributer nothing special at all. been looking at msd but dont really know the best rout to go any input would be great thanks!
  2. Classic Tech
    Hi!! Please! can some one help me I want to upgrade my ignition system I have a Mustang 1970 302, can some one recommend a compleate set of ignition system? I have seen at ebay some packages for example, MSD Street Fire Ignition, MSD Blaster 2 Coil, MSD Universal Wires and ProComp Distributor...
  3. 4.6L Tech
    First off I'd like to thankyou for any help you can give. I'm in no real hurry. My car is in storage and im stuck in the desert. I'll be home in 9 months, to start this project car of mine. A 1998 Mustang GT with just enough damge to make it a challenge. Well, my qeustion I'm geussing is...
  4. Classic Tech
    Hey guys. I'm to the point in my restoration of my '65 mustang that I need to pick out an ignition system in order to turn it on for the first time. So, I want to get opinions on the different types/brands out there and what kind of performance/experience you've had with your particular...
  5. Classic Tech
    So here is the sit. I installed the accel points elimination kit on my 289, it ran fine for a week then would die sometimes and backfire some other times (my car had never done this before the installation) I removed the kit and went back to the old school method (the one that has kept my car...
  6. V6 Tech
    Hey, I still can't figure out where the miss is. Can it be the coil pack? It seems to miss in maybe one cylinder. I received a code for a miss in # 1 cylinder. Is there anything else I should look at? I have replaced: Wires, Plugs, Fuel Filter, Air Filter, Cleaned Air Temp Sensor. I will...
  7. Classic Tech
    i want to upgrade my ignition possibly to a msd kit. How do i go about making the timing and firing order right if i replace the distributor. also i have a 40,000 volt flamethrower coil is that good enough or do i need a special coil. I figure i have to replace the ignition module and the...
Top