Ford Mustang Forum banner

injector

  1. 1995 Rebuilt engine cranks but no start

    V6 Tech
    Rebuilt the engine and have been having issues with it starting. Will crank over and start with starting fluid, but will not start on its own. Verified injector wiring and all was good with the noid light. Burpped injector rails and good pressure. Tested crank sensor and it is also good. At a...
  2. 94 Mustang 3.8L is Flooding #6 cylinder.

    V6 Tech
    I am having a problem with my 94 3.8... The #6 injector blows fuel for a couple seconds as soon as you turn the key on then stops. Then as soon as you crank it, the injector blows wide open, the other injectors are fine only #6 is acting up. I have played musical chairs with the injectors and...
  3. 1984 SVO random misfire. Help me plz

    2.3L Tech
    Hi, Sorry if this is to long below. I'm having a few issues with my SVO. I have a 84 mustang SVO, It has the 2.3l turbo motor. It has a misfire at idle. It also misfires when you rev it to 3500rpm or 4000rpm. it goes lean and back to rich on the Air/fuel gauge when it misfires. Its a random...
  4. 1996 Mustang V6 engine shaking and rough idling ! Injectors next?

    V6 Tech
    Im new to the forum. Hopefully I can get some help and help someone along the way. Recent owner of a Mustang. I recently bought a 1996 Mustang V6 that needs a little bit of work (great deal, so it's worth it). Engine is shaking when idling so I have checked the ignition coil, spark plugs, spark...
  5. Sequence Question?

    5.0L Tech
    Could an improper fuel injector order cause an engine to act like a rev limiter? I have an old 289 that is running a 302 H.O. firing and injector order. I runs but, around 3500 RPM it acts like thats it like that is red line. I thought maybe if I repinned the PCM that it would run smoother and...
  6. cheap 24lbs/hr ford injectors

    5.0L Talk
    changing injectors in my 5.0 looking for 24lbs/hr for injectors EV1 body style please post a reply if you know anywere or anyone that has good prices on them
  7. knocking sound under hood

    4.6L Tech
    Hey guys I need some help my car makes a faint noise when I start drivingv it its when I press the accelerator then it gets louder real loud its anoying I'm not sure what it is maybe the fule injection but I put fuel injector cleaner in and still does it once it actually cut off on me can I get...
  8. Injector and MAF size help

    2005-2010 Mustang GT Tech
    Im going to convert to E85 fuel and understand that I will need to increase fuel volume especailly with my nitrous kit. (100 Shot). On nitrous my car puts 380hp and 505tq to the wheels. I was wondering what size injectors as well as MAF to push enough E85. Also if anyone has info on jet size...
  9. cylinder 3 missfire problem on 1994 Mustang V6?

    V6 Tech
    hi myname is james and i was driving home in my 94 v6mustang 3.8 and i went in the store and came out and when i started the car i realized it was running weird it was really rough and got worse at lower rpms when slowing down. I have since took it to advance and they told me my cam shaft...
  10. 331, h/c/i/, 150 shot Nitrous: which injector??

    5.0L Tech
    I would like to get some opinions about injector sizes for my new engine: 331 with cobra intake, GT40 aluminum heads, e-cam, 10:1 compression, 150 hp Nitrous Oxide. Most people i have talked to say anywhere from 24# all the way up to 42#. The nitrous is for track days only, and don't want to...
Top