Ford Mustang Forum banner


  1. Need: Step-by-Step for Engine Install after Painting Engine Bay

    Classic Tech
    Hello Everyone, I’ve been a longtime lurker and now first time poster. I am nearing the end of a restoration of my 1968 Mustang Coupe. Last spring, a friend and pulled my 289 engine out so I could clean and paint the engine bay. With a lot of help from this forum, I tackled a lot of the...
  2. MMD rear valance Mounting Hardware.

    2011-2014 Mustang Talk
    Does anyone know where i could get a replacement one, i dont know where i put the one that came with the kit. I dont know who to contact. Ive tried the MMD website, but it seems as if it is only a "showroom" webpage. Maybe american Muscle or any of the other vendors? I dont mind paying for the...
  3. 2000 Mustang GT with Mach 460 Sound System After Market Radio Installation

    Audio, Video, Navigation & Alarms
    Disclaimer As mentioned on other posts, I'm not a professional nor do I have any training. All information provided in this post is based on experience and research but I can't guarantee things will work out the same in your experience. Resources 1) I did search and read over various posts by...
  4. 1968 Fastback Lower Scoops Installation

    Classic Talk
    I am restoring my 1968 Fastback and I'm planning on installing the lower scoops, but having difficulty find instructions on how to install them. Also the one I purchased are functional. I got the ducts and everything. So do any of you pictures on how to do this, because I found a thread a few...
  5. New to forms, have a few questions (speakers)

    Audio, Video, Navigation & Alarms
    Hey, I'm Tori from Wisco. I got my 2000 Mustang Convertible about a year ago and I'm just now upgrading it a little bit. I bought speakers that fit the car, but installation would have cost me an extra $150 so I decided to do it myself. I got the front speakers in and they sound great, but now I...
  6. 2011-2014 GT500 Wing Installion

    2011-2014 Mustang Talk
    Just figured I would post a tread about installing the 3dCarbon GT500 PrePainted wing. I ordered mine from HyperMotive Performance and it didn't take long at all for it to get to my house. Looked great and already had the gurney flap painted. Instructions were pretty straight forward but it...
  7. 1969 Mustang Front Chin Spoiler

    Classic Tech
    I was wondering anyone has installed a front spoiler onto their 69. I think it adds a great and aggressive look, and it's a pretty cheap part so I thought why not. Is it a fairly easy installation? will I run into any problems?
  8. !969 Mustang Front Chin Spoiler

    Classic Tech
    I was wondering anyone has installed a front spoiler onto their 69. I think it adds a great and aggressive look, and it's a pretty cheap part so I thought why not. Is it a fairly easy installation? will I run into any problems?
  9. install advice needed h-pipe/MSD parts

    5.0L Tech
    Hi guys. Finally got some parts delivered for my '88 5.0. As the title suggests I'm looking for a little advice with the install. Starting with the h-pipe. Managed to get the bolts to the rear of the pipe out with no problems. The bolts to the headers are kicking my ass. I have taken the...
  10. broken window, installation for quarter

    4.6L Tech
    I own a 99 mustang coupe. Recently my passenger quarter was broken when someone tried to rob me. I purchased another window but want to try to install it myself. Any information on how to find out the best way to do it? All the window installation places are extremely expensive and I know I...
  11. Procharger installation problems with a 2012 5.0?

    2011 - 2014 Mustang GT Tech
    Has anyone here had or heard of issues with installation of a procharger on a 2012 Mustang GT?
  12. s197 trailer hitch install

    2005-2010 Mustang GT Tech
    Hello fellow 'stangers! saluting-us-flag.gif Today I embarked upon a install a draw-tite trailer hitch on my '05 GT. Now, before I go any further, please don't trash this thread with comments a la, "why would you do that to a mustang?!". let me remind you that its nothing more...
  13. 05-14 Steeda Rear Chassis X-Brace Review

    2011 - 2014 Mustang GT Tech
    Hey guys! Last night with the help of a few friends, we installed the new Steeda Rear Chassis X-Brace (the one that doesn't delete the rear seat) on my 2013 Race Red GT. I love it for 2 reasons: 1, it looks damn good with the seats down and 2, it does actually make a noticeable difference in...
  14. American Muscle Black Billet Grille w/ Relocation Fog Installation on 2013 GT

    2011-2014 Mustang Talk
    A little while ago, I installed the AM Black Billet Grille (Upper and Lower) on my 2013. I also purchased a custom center relocation fog kit from a guy off of eBay. I have always been in love with the center lights, especially with stripes and I knew no one had made a center fog grille for the...
  15. My Install of Eibach Sportlintes on '13 5.0 (Semi-Pic Heavy)

    2011 - 2014 Mustang GT Tech
    Its been a few weeks since I had my lowering springs installed on my '13 5.0 and I have no complaints at all. I absolutely love the springs. I was considering going with H&R SuperSports for a while but my brother talked me into these springs which are the same ones he has had for a year or so...
  16. Rear window louver install: Should Tint be applied before, after or at all?

    2005-2010 Mustang Talk
    I know there are a ton of louver post but I could not find anything on my specific question please bare with me :deadhorse: I am planning on tinting my windows (35%) all around. I also plan to add an MRT rear window aluminium set of louvers later this summer. I was wondering if the louvers...
  17. 2013 Mustang GT Borla S-Type

    2011 - 2014 Mustang GT Tech
    So I just finished the installation of my new Borla S-Type axle-backs and I am in love! From what my friends have and videos I have heard (and now with personal experience) S-Types are just the best. I love the sound that flows out of those 4.5" tips (MASSIVE btw, love it) and driving around...
  18. Cannot seat torque converter into front pump of a C4 tranny. Please help!

    Classic Tech
    I've tried to seat my torque converter into my C4 transmission but I can't seem to get is into the front pump. I got the TC to 'click' into place twice, over both shafts but it won seat all the way into the pump. I've tried lining up the grooves, wiggling and shaking but to no avail. I have...
  19. 2004 Mach 1 Engine and tras installation

    4.6L Tech
    I pulled the motor off my 04 Mach 1 and rebuilt it, I pulled the trans from the bottom and the engine from the hood, I don't have access to a lift, I only got 4 jack stands, did it all by my self in two days. now I need to put everything back together, would it be possible to put everything...
  20. Good shop for subframe connector installation?

    East Central
    Any recommendations on good shops in south eastern wisconsin, particularly in the Milwaukee area to have my subframes installed? I am looking for one with a "drive on" lift, as i read thats the best way to do it. Thanks!