Ford Mustang Forum banner

issues

  1. Transmission Noise (Clunks, "knocking," etc.) Need help.

    2011-2014 Mustang Talk
    Hello, I need some help identifying a problem with my 2012 V6 auto. I've taken it to several shops 5 times total now, and nobody can pinpoint exactly what is wrong. I've been told to take it to a transmission specialty shop after the mechanics said it might be the transmission mounts, or...
  2. 2014 Mustang Automatic - Issues with Car, Jolting and screen between gauges goes "--"

    2011-2014 Mustang Talk
    2014 Mustang Automatic - Issues with Car, Jolting and screen between gauges goes "--" I have a 2014 Mustang v6 premium convertible with about 61k miles. I had an issue last week where I started the car and put it in drive (I made sure it was in drive). I tried going but the car was going very...
  3. 1996 mustang gt code P1443

    4.6L Tech
    Looking for an answer to this issue, code reads Evap emission system control valve (low/no flow) and do not know what I need to do to fix this. Also, when ever throttle is given, the car bogs at times, like not enough fuel or something, are these issues related? Also, not sure if this is true or...
  4. 2000 V6 Manual Driveline Issues?

    V6 Tech
    Hello all, I just bought my Mustang about a month ago and after the euphoria wore off, I am now left realizing that I may have some serious driveline issues. There are a ton of different "symptoms" my Stang is exhibiting that has me a little worried. Any help on what may be the issue is highly...
  5. Drivers side motor mount wont seat all the way down.

    5.0L Tech
    Last night i installed the energy suspension motor mounts into my 88 GT. The passenger side was simple and seats into the bracket correctly. However, the driver side doesnt seat all the way down into the bracket, even though i let the motor down off the jack, and the passenger side was Not...
  6. New to forum, and new to Mustangs

    Introductions
    Hey guys I'm considering getting a 5th gen Mustang GT (stick) next summer and was just wondering what things i should know going to get one. When looking for one what model specific issues should i be looking for? What are some of the classic issues over 60,000 miles for this generation...
  7. Halo Light beam pattern issues

    2005-2010 Mustang Talk
    Hey guys, I bought dual ccfl halo projector headlights with the 3 leds in the top corner. Love the lights, they look sick, but my beam pattern is way off. Drivers side is quite wide and the passenger side is quite narrow. Does anyone have these lights and know of a way to fix this? I have...
  8. Pony Projector mirrors - looking bad cracked

    2011-2014 Mustang Talk
    So we rarely drive at night. So when we get out at house, I noticed the ponies looking cracked. This is on smooth concrete and I even wiped with clean microfiber rag. When new, they looked very crisp and clean. Now they have lines appearing and probably going to get worse. I doubt anything will...
  9. Again with the fuel sending unit issue

    Classic Talk
    Well today, i test my fuel sending unit as it was draining and the number on ohms i was getting was around 165-170. I was taking the positive and putting it to the muffler. Then after i took it out realized that i shouldve grounded it to the plate, so i put it back in, just hanging there...
  10. 2011 5.0 Serious Transmission issues

    2011 - 2014 Mustang GT Tech
    I've had my 2011 5.0 for about 5 months now... it has approximately 34k miles on it, i bought it used with 27k... there were no immediate problems besides gear whine(3.73 manual transmission, premium, brembo, shaker1000). all i have done so far is jlt cai and a bama tune. Currently my car will...
  11. My 1965 Mustang Won't Crank

    Classic Tech
    I recently got my hands on my grandpa's 1965 Mustang. It had some technical issues, but those were all fixed. Unfortunately, I ran into another one, and I can't figure out the issue. The car sat for 3 days without being started, and now the engine (6 cylinder) won't even crank. I know it isn't...
  12. Advice needed! Blemished factory paint job on 2013 Mustang GT Premium.

    2011 - 2014 Mustang GT Tech
    Good day to all, I am seeking some advice on how to get my factory defective paint fixed as I am getting nowhere with my dealer. So, here is my dilemma: I ordered a 2013 Mustang GT premium with all the bells and whistles. After two months of waiting I finally took delivery and to my dismay I...
  13. 1989 Mustang 2.3L 5 Speed ECU Computer Problems! Please Help!!

    2.3L Tech
    Hey Guys, I have a bit of a problem with my '89 Mustang 2.3L 5 Speed. A while back I had some issues with it not starting after I let it sit for over 6 months. I tried everything, replaced almost everything, and what it came down to was when I replaced the ECU computer at the front passenger...
  14. 2007 Mustang GT Camshaft Smell?

    2005-2010 Mustang GT Tech
    Hi, I'm new here and really wanted to ask you guys a question. I have read on the internet that some people have issues reguarding a lopey cam with a pungent exhaust smell. Is this true? I really want the FRPP Hot Rod Cams BUT if they make my car smell from the inside or out like gas they are a...
  15. Buying '93 GT - what do I need to look for?

    Introductions
    Howdy - In 1993, I bought a GT right off the showroom floor. In an effort to relive my youth (and have some fun with my son), I am looking at a '93 GT for sale in my area. Since I sold my original GT with 26,000 miles on it (not a convertible), I'm not sure what goes wrong with these with age...
  16. 2006 Mustang Check Charging System Light

    2005-2010 V6 Mustang Tech
    So I have been having alot of trouble with my 06 Mustang V6 check charging system light coming on. recently I have noticed that when I start my car there is no light and after about 9 or 10 mins of driving the light comes on. I have read that the shaker 500 radio could be causing the problem but...
  17. 1966 Starter problems please help!!!

    Classic Tech
    Okay guys check this out.. I have a 66 stang with an 88 t5 and transmission kit.. 289 4bbl etcetc.. I have some weird starter problem.. it's grinding!!!! I have 3 shims in it as well (because it wasn't engaging when I put the kit in). Now.. One day I get home and notice a small oil pan gasket...
  18. Magnaflow Competition Cat Back (15590) + Ford Racing Springs (M5300K) = Clanking

    2011 - 2014 Mustang GT Tech
    I'm looking for some input and sugestions on a "clanking" issue I have with my 2011 GT with a Magnaflow Competition Cat Back (15590) and Ford Racing Springs (M5300K). I installed Ford racing springs on my car but have not done the shocks yet (on the way). I would greatlly appreciate any useful...
  19. 2006 Mustang Squeeking Issue. Please Help.

    2005-2010 V6 Mustang Tech
    My 2006 V6 mustang has a squeeking issue on the back left area of the vehicle. The rotors have been re-machined but should definately not be making a squeeking noise. The noise only happens when the car is moving. And only when the wheel rotates a certain revolution. I do not want to do...
  20. 2011 Mustang Idle Surging / Stability / Stalling Issues? Look in here!

    2011-2014 Mustang Talk
    Many people have been complaining about idle issues with a custom tune, and also even on a stock tune when they first return it to stock. There is a simple answer to this, and luckily... a simple fix! First, the reason that this happens - your PCM calibration controls the idle, and memorizes...
Top