Ford Mustang Forum banner

jlt

  1. Airaid vs JLT vs Steeda vs KN Cold Air Intake

    2015+ 3.7L Mustang Talk
    First mod! I've read a lot of things on the Internet and for the most part all of these brands gets the job done when it comes to the cold air intake. But I wanna know if anyone has experienced with those brands did dyno test
  2. (Beware) V6 JLT Cold Air Intake Too Rich

    2011 - 2014 V6 Mustang Tech
    Bought a JLT Cold Air Intake a few months ago and after a few weeks of stumbling on start up and rough idling it finally decided not to start this morning. I took it to my local dealership and after about 15 minutes hooked up to the IDS, it showed that the car was over fueling about 30%. We...
  3. JLT Cold Air Intake Rasping at High RPMs

    2011 - 2014 V6 Mustang Tech
    Installed a JLT Cold Air Intake on my 2013 a few months ago and ever since then I have noticed that above about 5,800 RPMs it gets very raspy. I have Flowmaster Axle-Backs so it's much more noticeable. I was wondering if it could be caused by running too lean because of the intake. Just...
  4. V6 JLT Cold Air Intake Rasping At High RPMs

    2005-2010 V6 Mustang Tech
    I have a 2013 V6 Mustang with a JLT Cold Air Intake that I installed a few months back. Ever since then I have noticed (with Flowmaster Axle-Backs) that at above 6,000 RPMs it gets very raspy. I have always wondered if it's running too lean up high in the powerband. Has anyone has similar...
  5. New Member from PA 2013 5.0

    Introductions
    Hey everyone just wanted to say hello. My name is Greg and I live in Tamaqua PA and am a fellow mustang lover. I just purchased my 3rd mustang a back in July a 2013 5.0 Premium. Here is the car stats stock. GT Premium, 6 speed Brembo brake package 3.73 gears Aftermarket add ons: JLT Oil...
  6. Problem Installing JLT CAI & SCT Tune from AM, with solution!

    2005-2010 V6 Mustang Tech
    Hello, wanted to share my experience so that others may learn from it. I bought a used JLT CAI & SCT tuner from a forum member. I purchased lifetime tunes from Bama/ AM. I started the installation last week but there were problems. The kit I bought was missing a clamp and the heater hose...
  7. Saving Stock Tune w/ SCT SF3 3015 Tuner?

    2005-2010 V6 Mustang Tech
    Going to install my first CAI/ Tuner on my V6 convertible. It's a JLT CAI w/ SCT SF3 3015 tuner. It's a used unit (Thanks StevoStang!). The tuner is "unmarried" and not locked, it has 5 "unlocks" left. I loaded the three files from AM on the tuner without any issues. The SCT PC Software works...
  8. Moroso Air-Oil Separator

    2011 - 2014 Mustang GT Tech
    As I was emptying my JLT catch can the other day I managed to crack one of the plastic fittings on it. When I screwed the canister back on I went a little too far and lost grip of the top piece, which put pressure on the hot plastic fitting and it cracked. I looked for a replacement...
  9. $$New LOWER price JLT Carbon Fiber Cold Air Intake

    2011 - 2014 V6 Mustang Tech
    2011-2012 Mustang 3.7L V6 JLT Carbon Fiber Cold Air Intake
  10. Look what showed up at AmericanMuscle's door today... thanks JLT!

    2011 - 2014 V6 Mustang Tech
    A 2011 V6 Cold Air Intake from JLT! Carbon fiber, smooth bends, reinforced coupler, large heatshield with pinch seal for the hood. This thing is sick! Anyone want to wager a guess what the gains are going to be? This is going on our 2011 and on the dyno Monday or Tuesday!
  11. 2008 GT - CAI install/uninstall awaiting Tillman tune

    2005-2010 Mustang GT Tech
    So I ordered a JLT CAI series II and 93 Performance tune from AM , installed it last weekend and was not entirely thrilled other than throttle response seemed improved and a tad more HP / torque above 2k. I'm still lagging off the line and cant spin the tires from a dead stop. The engine...
  12. Enlighten me with your knowledge...

    2005-2010 Mustang Talk
    I just bought and installed a JLT CAI with a 91 oct performance tune from AM/BAMA and it totally turned my car into a different beast. I love it! I had heard before that CAIs are the gateway mods and guess what, i just experienced it myself. :p So I still have like around 500 left for another...
  13. AM Steeda or JLT Intake?

    2005-2010 Mustang Talk
    Hello everyone, I'm about to purchase a cold air intake from AM and I'm not sure which one i want. My options are Steeda CAI SCT SF3 Combo http://www.americanmuscle.com/2005gt-steeda-cai-xcal2-kit.html JLT CAI SCT SF3 Combo JLT 05-09 Mustang GT Cold Air Intake & SCT SF3 Combo at...
  14. CIP-9 Bolt, for intake

    2005-2010 V6 Mustang Tech
    Alright, so my intake screw snapped in half when I was installing my JLT intake, but I used a different method of fastening the JLT intake and has been perfect ever since. But I want to be 100% perfect. I bought the replacement screw and was able to get the stock CIP-9 Bolt/intake fastener out...
  15. JLT CAI and the dryflow filter

    2005-2010 V6 Mustang Tech
    I am planning on getting a dryflow filter before I'll have to clean the CAI again and I've got a few questions. 1) Where would you guys and gals recommend I buy a Dryflow filter? 2) What dimensions should that filter be for the JLT? 3) Because it is the same size I won't need a new tune...
  16. Advice on nitrous nozzle location

    2005-2010 Mustang GT Tech
    Hi there Im about to fit a wet nitrous kit to my '05GT but im hearing quite a bit of conflicting information as to the best location to fit the fogger nozzle. I have a JLT intake which has a reasonably sharp 90 degree bend before the throttle body, and im trying to decide whether to locate...
  17. 2005-2009 V6 Mustang CAI

    2005-2010 Mustang Talk
    I know there are a lot of threads out there discussing cold air intakes for the Mustang. I've read up on the major brands like JLT, C&L, TI, etc., and it looks like JLT or MMR are the way to go. But, I want to know how much hp and torque you can realistically look to gain with the cai and a...
Top