Ford Mustang Forum banner

lowering springs

  1. 2005-2010 V6 Mustang Tech
    I have been reading around and have noticed that most S197s have gone with eibach lowering springs. I am driving a s197 v6 and wanted to know if anyone had had RTR lowering springs on their V6. I have not seen any reviews involving having a v6, i have only read about them on v8s. I am willing to...
  2. 2011-2014 Mustang Talk
    After months of research, I finally had my appointment yesterday to lower the beast. The install went very smooth yesterday. In fact it even reduced a driveline noise (documented in another thread). Anyhow, I got the Eibach Pro-Kit springs installed with an adjustable BMR panhard bard and BMR...
  3. 2005-2010 Mustang Talk
    I need help deciding what to do. I have the budget for Eibach sportline lowering springs which include the coils and the new and lower bumpers but not for the wheels I want. I've heard so many different things about this topic. Some say I need new shocks and other costly add ons just to keep it...
  4. 2011 - 2014 Mustang GT Tech
    About little over a month ago I installed SR Performance Lowering springs. I just noticed that the rear passenger side has not settled as much as the drivers side has. There is about a 3/4in difference between the two sides. Is the normal and should I be concerned? Thanks
  5. 5.0L Talk
    I'm planning on lowering my 95 GT with FRPP B springs (~1"-1.25"), along with new Koni shocks/struts and steeda CC plates (taking it to a shop to get the work done). Any opinions on if I ought to get the steeda bumpsteer and X2 balljoint kits installed at the same time? What about a Steeda front...
  6. 2011-2014 Mustang Talk
    I just ordered some eibach lowering springs they are the sportlines and are supposed to drop 1.6inch in the front and 2.0 inch in the back... I also bought camber bolts to reduce the negative camber... I do not however have a pan-hard bar...my question is if anyone knows if this will mess up my...
  7. 4.6L Tech
    Hey guys. Im planning on lowering my 2000 GT convertible and i have a few questions first. Ive got aftermarket Bullitt wheels -18x9 front (275/35/18) -18x10 rear (285/35/18) Ive got 1in spacers on the rear. Just for styling. Im planning on putting H&R super sport springs with isolators...
  8. 4.6L Tech
    Anyone have experience with these springs from LMR? - 1979-04 Mustang Specific Rate Red Lowering Springs at LRS - Free Shipping! I have Eibach springs on my car now but want to lower it more than it is (the eibachs i have only lower it an inch, looking to get more like an inch and a half or two...
  9. 2011 - 2014 V6 Mustang Tech
    I want to get the Steeda sport spings to reduce body roll, and get that low pro look...but im a daily driver in MN, and snowy and icy packed roads in winter are inevitable. so with just upgrading the springs, will that make the drivability in those conditions worse? Or is that more so with full...
  10. 2011-2014 Mustang Talk
    Steeda Performance Sport Springs - YouTube Please let me know if I can help you with that.
  11. 2005-2010 Mustang Talk
    Steeda Performance Sport Springs - YouTube Please let me know if I can help you with that.
  12. V6 Tech
    Hey guys i just wanted yall opinion on which lowering springs are better or yall like more. Like which springs have a good drop, not to bouncy and make it a rough ride. H&R Super Sport Springs H&R Super Sport Mustang Springs (96-04 GT/V6) 51652-77 - Free Shipping! or Eibach Pro-Kit Springs...
  13. V6 Tech
    Hey guys ive been looking into lowering springs, im looking at H&R but with the 3 three diffrent choices im having trouble decided which one. If anyone has pics of the H&R Sport, Super Sport, and Race springs that would be awesome! Or if you have put them on your mustang what kind of drop...
  14. 2005-2010 Mustang Talk
    So I was looking at some lowering springs and had some general questions. I have the gt rear end in my 4.0, so I've noticed im about .5-1" taller than stock now. I want to get 2" lowering springs, will I need to replace my shocks and struts as well? Im also planning on getting 18 or 19"x 10"...
  15. V6 Talk
    Hey guys ive been looking into getting lowering springs for my 98 coupe, there are just alot of diffrent options out there. What would be a could drop height for the 98 so that it gives it an aggressive look but at the same time isnt to low that your scrapping the bottom of your front bumper...
  16. V6 Tech
    So i have sort of 2 seperate questions. The first one is that ive been looking at lowering springs on am and there are a crap ton of different options :confused:. What would be the best drop to go with since pretty much all of them are different. The Second question since i have a 98 which...
  17. 2005-2010 Mustang Talk
    I'm looking to redo my suspension on my 09 gt the stock is lets say not so good i bought ford racing k springs awhile back but never put them on because I've been waiting to see what else i should do while the spring get put on (shocks, control arms, sway bars etc) I've had my heart set on the...
  18. 2005-2010 Mustang Talk
    This morning I lowered the Mustang. It was supposed to lower a GT 1.6" in the front and 1.8" back, but mine ended up being like 1.2" and 1.6". Anyways, I like how it looks, but I'm having a couple dilemmas. . . I have my aluminum adjustable panhard bar sitting in my living room, but I'm not...
  19. V6 Tech
    I have a 1996 v6 and i plan on lowering it an 1.5" but before i do i wanted to make sure if there will be any negative effects on the car. I called a mechanic and he said yes but was short with me and no help so please help me.
  20. 2011 - 2014 Mustang GT Tech
    Finally decided to lower my 5.0 and going for the steed sport springs but having a hard time deciding on a set of shocks that don't hurt ride too much. I've read about koni's but don't know which ones and would like to hear from anyone using them. Also what are the sway bars for and do i really...
Top