Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 40 Results
  1. 5.0L Tech
    Hello 5.0L Tech! So I replaced my shocks, struts and springs with the Bilstein b6 and B12 Pro-Kit from and the ride isnt nearly as soft as i thought it was going to be, granted ive only driven on it for about 30 minutes so im thinking it wont be as bad when things settle into...
  2. 2005-2010 Mustang GT Tech
    Am I correct in assuming you usually want to put in a little extra work to lower your ride right or is this something that's drummed up to get you to spend more money. Of course if you've got the money and the desire, you'd rather upgrade whether it's to lower or go aftermarket without the drop...
  3. 2005-2010 Mustang Talk
    Hello all, I hope this is the right place to ask this, if not, sorry. April of this year I finally got my first mustang. I had some money left over and thus my modding fever began. So far, I just did the basics - CAI, a tune, and axle-backs. I have always wanted to lower my car (even my last car...
  4. 2011-2014 Mustang GT Tech
    Hi all, I have a 2014 GT Auto with the Brembo Package which I got mildly lowered with the Eibach Pro kit (including an adjustable panhard bar). I recently decided to replace the control arms with aftermarket tubular plus spherical bushings (J&M Exstream Joint LCA) as well as BMR rear...
  5. 2011-2014 Mustang GT Tech
    I am interested in getting a complete suspension kit install on my 2011 GT and wanted to see if anyone had a recommendation on good install shops. I am on the south side of town and PSI Motorsports is the closest speed shop to me. Any info or leads would be helpful.
  6. 4.6L Talk
    hello all, I installed new eibeck lowering springs on my car. along with new bilstein struts in front and new Monroe shock and steering dampers in the back and yet I still get a very rough ride anyone know why? my car is a 2003 mustang gt convertible
  7. 2005-2010 V6 Mustang Tech
    Hey everyone I have a 2005 v6 mustang and would like to lower it about one and a half inches. I'm not very knowledgable on the subject but I'm pretty sure you can't just buy lowering springs and be done? Does anyone have any experience or knowledge on the subject? What all does lowering your car...
  8. 4.6L Tech
    im in the process of lowering my 02 gt, i bought the eibach sway bars and ive ordered the sportline spring kit from eibach as well which lowers the car 2inches in the front and about 2inches in the rear. My question is what is a good strut set up to go with that will handle the 2inch drop and...
  9. 2011-2014 Mustang Talk
    Hey guys. Im planning on lowering my 2000 GT convertible and i have a few questions first. Ive got aftermarket Bullitt wheels -18x9 front (275/35/18) -18x10 rear (285/35/18) Ive got 1in spacers on the rear. Just for styling. Im planning on putting H&R super sport springs with...
  10. Classic Tech
    My ride set higher in front than back. At least an inch. I like the looks of a more lower ride. What's the best way to go without breaking the bank. Airbags, leafsprings, coil overs?????? Looking to put 17" wheels on it when finished and maybe one size larger in back or a similar combo.
  11. V6 Talk
    I've seen a couple of 90's camaros and of course a couple of new edge mustangs with a drop, but with the front end sitting about an inch lower than the rear, I really love this look because it gives it a very aggressive look, what would be a good amount of drop to acheive this look? im thinking...
  12. 5.0L Tech
    I managed to take a set of Eibach Sportline lowering springs Eibach 86-93 Mustang 5.0L Sportline Kit [4.1035] : Lethal Performance, Performance parts for Ford Mustangs from a '90 GT (the same car that I took the 8.8 rear from and swapped it to my '83) and they're in good shape. I want to put...
  13. 4.6L Tech
    Hey guys, as some of you may know, i'm only 16 years old, part time job, and have a 98 GT vert. I'm just starting to have the money saved up to start modding my stang. I've been looking into lowering it about 2 inches, i found some lowering springs on ebay that lower it 2 inches for like 85...
  14. 5.0L Tech
    Hello! I own a 1989 5.0 LX Hatchback and had some questions about the suspension. I was looking to lower the car an inch or two, but want more of a performance shock. I heard Koni and Eibach were good but I really don't have a clue which brand to get. I was looking into getting some Belltech...
  15. 2011-2014 V6 Mustang Tech
    Has anyone lowered their car to improve handling? What would you guys recommend to use for lowering the car?
  16. 5.0L Tech
    Hi all, I have a 1990 GT that was lowered when I bought it. It just has the springs, no camber plates and stock bushings on the steering rack. It rides like an absolute brick. Should I look into camber plates and what can I do about the ride? I am under it today replacing the steering...
  17. 5.0L Tech
    I have a 94 mustang Gt 5.0. I have seen springs being installed but have never done it myself. I would greatly appreciate if I could get tips,pics,or the steps of the install
  18. 4.6L Tech
    I have a completely stock, white 1996 mustang gt. Its in really good condition. I want it to be lower so that the wheels look more flush with the fenders but idk how much my stock struts can take. american muscle has lowering springs, i was just wondering what the lowest i can go without...
  19. 4.6L Talk
    i am lowering my 04 gt and putting new shock/ struts on i have read that some people changed there plates and some have not. Im just wondering if its worth it to do it or not.... also is it worth getting the bumpsteer
  20. 5.0L Tech
    I have an 83 GT 5.0 Convertible 5 speed and I was wondering what I would need to lower it about 2" front and rear
1-20 of 40 Results