Search Results for ‘manual transmission’

Just replaced valve train, headers, long pipe, and high flow CATS. Check engine is not on and no codes are being thrown. When running through emissions, OBD monitors are registering as not ready. I've driven the car for 2 weeks and ran through a Ford drive cycle I found on Google but no luck...

Greetings! I've had my 07 Mustang Gt for a little over a year now. 116k miles, manual transmission, and its mostly stock. Since I got the car, there has been a chatter coming from the transmission but I've been told this is normal to an extent with this model. As the year went by, the chatter...

Hey all, Thanks for reading my wall of text question from a Mustang newbie. I bought a 2004 Mustang GT and discovered a leak on the manual transmission. This thread...

I am doing research for my build. I have 68 fastback with a 351W, around 363 after machining. It produces around 400 HP with a red line of 7000 RPM. My transmission is a TKO-I (260 0708) which is listed for up to 425 lb-ft of torque but has the upgraded 31 spine output. I'm getting opinions on...

About 6 months after the purchase of my Mustang my throwout bearing started making a noise. Then all the sudden my clutch freaked out and wouldn't work. Got it replaced and here I am 1 1/2 years and the throw out bearing is starting to make that noise. Is this a recurrent problem for this...

Hey there! So excited to be a part of #allfordmustangs forum. I recently custom ordered my very first Mustang. I just picked it up a little over a week ago and can't explain my excitement! I've wanted a Mustang since I was 6 yrs old, sneaking outside to "pretend" I was driving my uncle's navy...

I got my first car over thirty years ago. It was a 1967 Mustang coupe with a in line 200 ci. 6 cyl. engine and a standard 3 speed manual transmission. I still have it. I drove it a lot in my 20s but through my 30s and 40s it has spent most of its time in a garage. I'm finally trying to give...

Does anybody know what the manual transmission for the 1975 Mustang 2 Mach 1 302 V8 is? I've looked everywhere and cant find what it is

So I figure I give it a shot and see what happens when I try to get insight from the source. This is my email I just sent to Getrag's representative, who I found in the "quality" page of Getrag's website. Probably won't get much out of it...who knows if I'll even get a response, but again I...

I have 14,500 miles on my 2012 Manual V6, Stock. I make it a point to put my foot to the side and not ride the clutch. For the past 1,500 miles or so, I have started hearing a popping noise around the clutch area just before the transmission fully engages into the motor. This only occurs going...

I'm trying to rebuild the manual transmission for my 1974 Mustang II 2.8 V6. The books I have shows only one manual transmission for all the versions from 74 to 78 (all engines). I habe found the rebuild kit for the SR4 RAD, but all the on line shops says that this kit fit on the 2.3L and 5.0L...

Looking to order a bama tuner and airaid cai combo kit. I'm wondering what performance improvements I can expect to FEEL from the car? Read a lot of info about how the auto trans feels different and shifts better, but what about the manuals? I have 2.73's but any v6, manual input will help...

Hey All, I've got myself in a spot of trouble with my 1966 Coupe, which i use as a daily driver. One day my clutch was feeling like it was not completely disengaging completely. I was having trouble shifting into gears and whatnot. Figuring it was just in need of a linkage adjustment, I get...

96 mustang gt 5speed...... Ok I just recently had my transmission fluid changed at my mechanics shop while he was working on some unrelated issues. I usually do my own fluid changes and other things but I just had my mechanic do it while it was there. Ever since he changed the fluid...

Hello all, I have, in the past few months, been working on my 1966 Mustang. It came with a 200cid Inline 6 Cylinder engine, and I'd like to convert it from a automatic transmission, to a 4 or 5 speed manual transmission. The only problem is, I seriously cannot find one! Everything out there are...

Hi, I am new here and hoping someone can help. My 2007 Mustang GT has a 5 speed transmission with hurst competition plus short throw shifter. I have had the shifter in for a few months with no problems. I was showing a friend how short the throw is now at a stand still with the car running I...

Im getting to servicing my manual transmission on my 2007 ford mustang GT/CS. how do i go about this? i noticed i have no dip stick tube under my hood to pour in the new oil. Which type of oil is best for a manual transmission? Is flushing the transmission recommended? is it ok to flush the...

My new job has me commute 60 odd miles a day and I'm looking for a new car. Like most of us here I've always wanted a Mustang. The 2013 looks good, and I almost have my mindset on the v6 coupe premium. The GT premium is over my budget plus the gas mileage. I am getting a stick shift, since I've...

For about 3 weeks i had problems getting into and out of gears but it was very off and on that it would do this. Then it became stuck in 4th gear and will not come out. It will drive fine when in range of 4th gear and the clutch pedal will still put it in neutral. I have a B&M shifter. I have...

I have a 2012 GT 6MT and my clutch pedal has started to squeak quite noticeably when crusing and conservatively (slowly) depressing the clutch. I assume this is not to be expected or that there is a simple fix maybe routine maintenance with wd40? to stop the squeaking. If anyone could help it'd...