Ford Mustang Forum banner

mods

  1. 2011-2014 Mustang Talk
    Hey guys, I picked up my 2011 Mustang GT 5.0 at the end of last summer. I'm about to pull the trigger on: 1) Kooks Long tube headers with catted H Pipes. (Question 1) -I've been reading that the X-Pipe gets better gains but it's negligible, and I want the deep muscle car sound rather than...
  2. 2011 - 2014 Mustang GT Tech
    Hey guys, Well summer is coming and I'm looking for some advice on some mods I'm considering. I have a 2011 GT that I picked up at the end of last summer, and the original owner put in the Flowmaster Axle-Back Exhaust. That said, a few things that I've wanted to do to this car first: - Long...
  3. Road Racing
    Hello, I plan on buy a New Mustang GT 2017, and wanted to give it a lot of extra oomph. So far here is what I plan on getting: The Driveshaft Shop Carbon Fiber One Piece Driveshaft - Manual Hellion Twin Turbo - Tuner Kit Roush R2300 727HP Supercharger - Phase 2 Kit C&L Street Cold Air...
  4. V6 Talk
    I'm sixteen and I have an excellent opportunity to buy a 2004 Mustang V6 for much cheaper than market value. I haven't even seen a picture of it but I want to be prepared in case I have to jump on this chance. That, of course, requires some questions. 1. Is the V6 even worth it? I've grown up...
  5. 5.0L Tech
    Hello everyone, im new to this site and looking forward to some great info. I have a 89 Mustang Gt, 5spd. Just got the car a couple weeks ago and it feels way way under powered for what it has in it. The guy told me he never had it tuned since he built it, but the MAF/injectors/throttle body...
  6. 2005-2010 V6 Mustang Tech
    I've seen these steel braided fuel lines around on other cars and they look so much better then the stock black rubber lines. I'm currently putting my valve covers and intake manifold back in since I painted them and want to top it off with a new look on the lines. I've yet to find any articles...
  7. 4.6L Tech
    Hello everyone, Going through the forms previously its a common asked question of what upgrades would be best for the model. Well since mine is pretty much bone stock other then a muffler delete and a K&N filter on the stock intake... (L.O.L) What I am looking into is easy upgrades for the...
  8. Classic Talk
    Hi everyone, I've been a long time mustang guy but I was hoping I could get your opinions on the value of a car. I'm looking at 1966 Coupe, Inline 200, 3 speed manual, front disc conversion, new rear drums, 5 lug conversion, a little rust in the trunk pan. I'm specifically looking for an...
  9. Introductions
    Hey guys I'm considering getting a 5th gen Mustang GT (stick) next summer and was just wondering what things i should know going to get one. When looking for one what model specific issues should i be looking for? What are some of the classic issues over 60,000 miles for this generation...
  10. Road Racing
    Hello everyone! I have just purchased a 1979 fox body with the 302. The car is 100% stock. I want to start upgrading it to make it faster and handle better, for more street racing purposes, however im not sure where to start. Im thinking my first move should be to replace the stock carb with a...
  11. 4.6L Talk
    hey everyone! Just joined the site and I'm excited to get some good info! I previously had a 2000 v6 mustang as a teenager but just recently bought a 2001 gt convertible. It's in great condition with 50,000 miles on it. It's my daily driver but I want to mod it up a good bit. Right now I...
  12. 2005-2010 Mustang GT Tech
    I have a 06 mustang gt. 4.6l. I am wondering how much HP gain I have gotten from the mods I put on. I have a jlt series 3 CAI with a 93 octane tune. Also have o/r x pipe with SLP loudmouth axle back. Thanks for ur help!!!
  13. 2011 Mustang
    I've read all kinds of peoples opinions on bolt on mods. My question is are they really worth it, swapping to a boss intake, or new coil packs, different throttle body you get the jist. If it really is worth it what are the bolt on mods i should look at getting. 2012 gt 5.0
  14. 2005-2010 Mustang Talk
    Hello everyone, I am new to the forums. However, I am not new to the racing world. I am not very mechanically inclined, I am just a driving enthusiast. I love mustangs, I have an 05 mustang GT blacked out. I love street racing(in mexico) and racing at the track. I am trying to do my research to...
  15. 2011-2014 Mustang Talk
    i just bought my 2014 5.0 gt base package auto trans axle backflowmasters otherwise she's stock i ran a 13.8 way up here in denver co (can't stand it lol)
  16. Road Racing
    I've been thinking of taking my car to the local road course on the weekends. I don't want to dump a huge amount of cash into the car to make track worthy, so I am hoping to find out what simple tricks and mods are absolute must haves for a road course? (ex. steel braided brake lines, etc.) I...
  17. V6 Tech
    Hi all! So...long story short, I'm a computer technician, audio engineer and mustang lover. I'm working on a project that has my brother and I (he's a mechanic) fixing up my 02 stang that I grew up with... from 2002 to now-- we got the car when I was 12, and now I'm 24... Super emotional...
  18. Classic Tech
    Hey all, I was wondering if someone here could give me a reasonable estimate on what a 351w with a performer intake, 600cfm carb, Comp XE268h cam, Hedman mid length headers, full dual exhaust, electronic ignition but stock heads (soon to go) would be putting down? Thanks.
  19. 5.0L Talk
    hi, i have a 1989 mustang lx notch back 5.0.Anyone have any guess on what my car will run in 1/8 mile or 1/4 mile? or have almost the same set up and can give me an idea? A guess with nitrous and with out to please. I'm also looking for advice on what to do next to my car. · 4.10 ford...
  20. 4.6L Talk
    Hey everyone. I'm just looking for some opinions on future modifications to my Mustang. I've saved up around $3,000 dollars but am not sure where to start. I'm looking to gain horsepower mostly for occasional quarter miles racing. This is a daily driver in the summer time and stored in the...
Top