Ford Mustang Forum banner


  1. Cervini's Stalker II Hood

    2011 - 2014 Mustang GT Tech
    I have a 2012 GT Convertible and have a rust spot on my hood that has began to bug me. I figured that if I fix the rust spot i mines well purchase a new hood that I actually like. I really like this Cervini hood, but its unpainted. If I were to purchase a unpainted hood or a carbon fiber hood...
  2. Exhaust Video

    Mustang S550 General Discussion
    Here's a video of my new Borla S-Type Catback. I'm very pleased with this exhaust
  3. Kenne Bell Supercharger Upgrades

    2011 - 2014 Mustang GT Tech
    Hello, I have a 2014 GT. I am planning to put a Kenne Bell Supercharger on my car. I'm not positive which one yet but most likely going to go with the 3.6LC. My question is does anyone have or can anyone come up with a list for me explaining everything I'm going to need. Money isn't the...
  4. If anyone was wondering what ATAKs sound like..

    4.6L Talk
    Borla ATAKs on a otherwise stock 2v. Stock Headers/Mid, Unmolested Engine. I couldn't find a video like this anywhere, so I figured might as well try and help someone out if they were looking at ATAKs too! Here is the video, it's 15 seconds long. Just 3 revs. A video I posted on IG, I...
  5. 2012 5.0 6r80 Transmission failure

    2011 - 2014 Mustang GT Tech
    I have a 2012 Roush supercharged 5.0 with the 6r80 automatic in it. I've noticed for a while now that my transmission has been feeling a bit sloppy during shifts; putting it into gear, and in general just not living up to my expectations. I've only got 55K on the car but the fact that it's...
  6. Getting my first mustang need help

    2005-2010 Mustang GT Tech
    2007 GT premium 98k miles $13,900 2009 GT premium 72k miles $15,499 Both are black, convertible with a nav system. Also is 98k miles too much? Will I need to spend more besides oil?
  7. Whipple supercharger question

    Hey all, My buddy has a 04 mustang cobra with a 4.6 engine. The engine has a ford racing 2.3L whipple non intercooled on it. I want to put it on my 06 mustang gt with 4.6. With this whipple it was originally on a single cam and my car is a dohc, so im wondering if with this will i need a new...
  8. New clutch kit installed. feels like clutch not 100% engaging

    5.0L Tech
    Hey how's it going . I replaced my clutch about 2 weeks ago . And ever since I picked up the car it hasn't felt the same power wise. It just doesn't accelerate as hard as it use to. And after I put about 300 miles on I decided to do a quick run through the gears . When I did that I smelled...
  9. 4.6 motor build bolt question

    4.6L Tech
    I currently have a built bottom end H-Beam manley rods and CP pistons all forged.. My question is where can I find some main cap bolts? It's all assembled but Im not sure if the shop who assembled it used the factory torque to yield bolts or not that i had dropped the block off with so I dont...
  10. 1988 mustang gt hatch battery drain Need help.

    5.0L Tech
    My car has a pretty bad drain on it . It's only been sitting two days and when I went to start it the battery was dead. I know I've always had it but I drive the car basically everyday so the alternator was keeping it charged. And I didn't think it was that bad . When I first got the car it...
  11. 2000 mustang gt tips

    im new to site, i have 2000 mustang gt manual with 155k on it, i just brought car (first mustang) it has aftermarket exhaust and everything else is stock to my knowledge. car sounds and rides great just looking for some tips on where i should to start for performance upgrades. i have a small...
  12. Anyone interested in 2010 Mustang GT/GT500 Parts?

    2005-2010 Mustang Talk
    I have a bunch of parts that came off my dads 2010 GT500 that we are going to sell. I was going to try and fit some of it on my '13 GT but seems like too much of a hassle having to piece everything together too make it fit. He bought the car as soon as they came out and then a month later had...
  13. My Goal Build List, Suggestions on it? Comments?

    4.6L Tech
    :bigthumbsup Hey, so here is what I was thinking, for my final build up for my 01 GT. And I would like to know what everyone thought about it. Current area of focus finish the Exhaust, and my suspension, then go from there to my motor, and After I have all this installed I will focus on my...
  14. 1998 Mustang GT Question.

    4.6L Talk
    My question is that my car is stock and whenever i rev my engine it takes forever for the revs to fall, is there some part i could buy or one already on the stock engine i could tighten to fix this? Here is what it currently sounds like, if i wasn't descriptive enough. Thank you for your help...
  15. 1986 Mustang GT codes definitions and troubleshoot 21 24

    5.0L Tech
    21 24 what do they mean I dont understand what the book is telling me the issue is. What do I replace or do? is this just because I have no a/c cc's or o2's?
  16. Just joined! 1995 Mustang GT

    Just joined the forum and have to say it's one of the better forums I have found. I'm looking into getting about 400 horsepower out of my car without supercharging it or turbo charging it because I don't have that kind of money right now. Any advice on how I can get some more horsepower out of a...
  17. 2002 Mustang GT Clutch Help

    4.6L Tech
    ok so i put a new clutch in my 2002 mustang gt without a new flywheel the clutch that i put in is a performance clutch and holds up to 600 horses. My mustang is stock besides the new clutch but now everytime in the low rpms the transmission shakes a bit is my mustang not pushing enough horses...
  18. crossmember questions for c4 tranny in a 91 mustang

    5.0L Tech
    i just took out my aod tranny and try putting the c4 but the cross-member to the aod will not let the c4 tail end sit on it properly so do i need to get a c4 crossmember and does it matter what years and what kind if so? the tranny is a tci....:?::?::?:
  19. 2002 Mustang GT?

    4.6L Talk
    Hi, I’ve been looking around for a while for a mustang, just recently I found a 2002 Mustang GT its located at a dealership, has a 5 speed manual, flow master exhaust, K&N air intake, 69,000 miles, new rims and tires, brand new brake pads + rotors, leather seats, car is almost in perfect...
  20. Cold Air Intake - Best One? Gains?

    2005-2010 Mustang Talk
    What is the best cold air intake? Do I want a combo kit from AM with Steeda and a programmer?, K&N?, C&L ? What HP and MPG gains should I see? Is it worth it? Other than increased noise any other cons? I do not drag race. I have a new 2009 GT manual 5 spd, 100% Stock except for synthetic oil &...