oil pressure

Hi fellow mustang owners! I am in an urgent situation right now. This past weekend I changed my oil & filter and automatic transmission fluid and filter as well. I have been driving my car and all seemed fine, until this morning on my way to work. The oil pressure gauge was constantly flinging...

I have a 98' Mustang 3.8l and the oil pressure gauge is reading between the "MA" on "NORMAL" when its usually between the "RM". Can anyone tell why it might be doing this, and what i can do to fix it. Thanks ahead of time for all advice.

Okay fellas, a few gauge issues here: 1st - Speedometer, it works but it doesn't. Start from a dead stop it just jumps around in between 0-45. At about 45mph is sticks and works properly? Also, it isn't correct, how do you go about setting it up for the correct speed? Keep in mind, the front...

Hey whats up everybody, i had a few questions on installing my vaccum and oil pressure guage. i was told to get a T adapter to install the vaccum line somewhere around the throttle body but i don't know which hose. Also i was told to get a T adapter to install the oil pressure sender unit...

my oil pressure gauge has been jumping back and forth on my 97 gt for the past few weeks i know it has oil in it someone told me to see if it matters if the ac is on and on/off there is no affect

here lately my 97gt 5spd oil pressure gauge has been dropping. it will drop completely down then go back up to normal for awhile then drop down to no pressure again and repeat i havnt noticed and more motor noise than normal so i dont know if its possibly the sensor or if i really do...

I was wondering where i could find the oil pressure sending unit on an 88 5.0. I'm doing an oil change and i would also like to clean the connector on the oil pressure sending unit. Just one problem, I don't know where it is. Any help would be appriciatied.:so

Hello everyone, about a week ago I started hearing a ticking noise during cold starts. I also noticed that my oil pressure would drop all the way when I would start it up. So I'm thinking if my lifters are ticking, then I'm losing oil pressure? After the engine has warmed up a bit after driving...

I want to install an auto-meter oil pressure gauge on my 1995 3.8L. However, the original sending unit is small and in a tight location behind the alternator bracket, I do believe. I was wondering if anyone has installed the auto-meter sending unit on their v6? Do you have any pics that may...

i have a 89 mustang Gt and need to know the factory oil pressure spec for this car my oil pressure is 45psi cold when warm drops to about 35psi and at idle 25 psi is this normal the car runs great no noises cuz im really thing of putting in a new high voloum oil pump afew people told me that 89...

I have a 97 V6 mustang and the oil pressure sending unit and the coolant temperature sending unit need to be replaced. both gauges on the dash seem to be off and read low evan after driving for a while. I found the oil pressure sending unit but i am not quite sure how to get it off and what tool...