Ford Mustang Forum banner

pcv

  1. Classic Tech
    So I bought a generic PCV valve probably from AutoZone a while back for my 289, and with my cam (Comp 282 Magnum solid flat tappet) and carb (680HR), it's idling way too high. I've closed the secondary blades entirely, and the primaries are as closed as I can reasonably get them, and it still...
  2. 4.6L Tech
    Hey all, I've constantly used this forum for advise but never actually posted questions, so go easy on me, this is my first time actually reaching out for some assistance. My car has been idling rough and stalling out, it doesn't matter if I'm sitting at a red light, or if I push the clutch in...
  3. V6 Tech
    on my 1995 v6 i noticed the pcv valve on the passanger side valve cover has two ports. the bottom one runs along the fire wall to the intake ( fine ) . the top port is capped off. ( is this normal ) if not normal where does this lead to . i cannot find any loose or disconnected vacuum lines...
  4. V6 Tech
    What the title says...ive done some research and I dont see anyone having main issues with their engines after deleting their PCV system. I was just wondering what you guys thought. I have a 99 v6 which is horrible with oil coming from PCV so i made a catch can and changed the valve cover but...
  5. V6 Tech
    This is not my work I am re posting it from a different site, However they are my pictures of the one I installed myself. Highly recommended for 1999,2000 v6 mustang with the pcv issues. i have a 99 and the oil catch can works great. Listen to the comments on the forum husky will leak mine...
  6. Classic Tech
    Ok Guys, My block casting number is c5de-6015-H I have 5 freeze plugs (three along the center and one on each end that sit top of cent on the passanger side of the block.) The engine has not emission control period. Valve cover is orange red and there is not a place for a PCV valve. It has...
  7. Mustang II Tech
    Hey everyone! Yet again, I have a question about my just purchased 2.3l Standard 1978 Mustang II. First off, the oil is pretty sludgy, and I'm getting that changed on Tuesday. Secondly, when I'm accelerating I get some bluish smoke, and more of it when I accelerate hard. My question is: Will...
  8. 5.0L Tech
    Hey, Quick question... Does the PCV valve need to be sealed? Mine slides out without much effort, and Im wondering if the pressure will push it out...
  9. 5.0L Tech
    ok so i got this SuperchargersOnline.com :: Product: Vortech PCV Bypass Kit for 1986-1993 Ford Mustang with 5.0L because my used kit was missing it and vortech dosent really tell you how to install it but from what i read online i cap off the throttle body and run new hose from the...
  10. 5.0L Tech
    A week or 2 ago I noticed that I had a bit of oil leaking on my driver side valve cover. Appeared to be leaking from a fitting in the bottom of the Upper intake manifold. I found out from research that it was probably my PCV valve and it was sucking oil up into the intake. I opened up the intake...
Top