Ford Mustang Forum banner

plugs

  1. Smog Removal

    Classic Tech
    Hello. I have a '67 Mustang (San Jose built) with a 289/2bbl. I am now in New Mexico and want to remove the smog system as I have no plans to move back to California. I did some research and got some plugs for it only to find out that they were way too small for the openings I need to plug...
  2. Foxbody Door Lock PLugs?

    5.0L Tech
    Hey guys I bought some new door lock lock actuaters and so when I was taking the old power locks out and the plugs they plug into were all gummed up and full of grease so I put a volt meter on the plug hit the switch and no power was coming through, then I tested the wires going out from the...
  3. Car missing

    5.0L Tech
    just completed a cam and head swap on my 95 GT. Put in an E303 cam and GT40P heads. The car has been sitting for abt 4 months while this happened. Now I have a miss I can't fix. I have replaced the plugs, wires, distributor cap and rotor, coil, fuel filter, put in new fuel with sea foam and...
  4. 1965 289 oily spark plug threads

    Classic Tech
    Hello, I replaced my plugs a few months ago and fixed the valve cover leaks. Today when I checked the plugs, there is oil on the threads but the tips look good. Currently she has a 2bbl holley carb with a pcv. I'm posting in hopes that a person smarter than me can help me in the right direction...
  5. 1995 GT Need New Plugs

    Introductions
    Hey Everyone!! New to fords and need new plugs for my 95 gt. Any recommendations? Same goes for wires. Car is currently a POS! Just need to start with the basics. Pulled codes... 10,172, 176, 452. Speedo isn't working so going to replace vss. That should take care of 452. Going to check for...
  6. Car surges while driving HELP

    2005-2010 Mustang GT Tech
    I have a 2007 GT and I've been running a Brenspeed 93 octane tune for about 2 years now with no problems... I recently changed my spark plugs with HT1 spark plugs at 55000 miles... and it seems since then I get a little bit of surging in 4th and 5th gears and a little more surging in 1st and...
  7. 100,000 mile maintenance suggestions?

    2005-2010 V6 Mustang Tech
    sadly my car is almost up to 100,000 miles but still runing strong. what are some other preventative maintenance ideas? whats your opinion on type of oil? Iv already flushed my radiator Changed spark plugs, wires, and coil replaced intake filter replaced fuel filter new brakes fuel injector...
  8. 1996 3.8 mustang will no accelerate

    V6 Tech
    I have a 96 3.8 mustang i am having major issues with. it will idle fine has a little trouble cranking but does crank ok. i can rev it up i nuetral (5 speed) and she it great feels strong. when i first start it she runs ok for about a mile or so, then it will start to misfire a little bit then...
  9. shake when idle, shake under 45

    4.6L Tech
    I recently stated getting a pretty bad shake in my 2000 mustang about a week ago, I replaced the wires and spark plugs and it doesnt do it as much at idle anymore but from a stop the car shakes until i get up around 50 mph, shaking is not as severe prior to change of plugs and wires but it still...
  10. 1996 Under Dash Wiring Question

    V6 Tech
    Greetings. I recently experienced the thrill of changing out the heater core of my '96 Mustang, and got everything put back together, but have one issue I can't find a resolution for. Under the dash, on the drivers side, to the right of the gas peddle, there are two multi-pin flat, wide...
  11. Misfiring problem with 2000 V6 Mustang

    V6 Tech
    hello, I went out to get a Pizza for dinner last night and my car was running perfectly fine, no shakes or shudders or slow acceleration. But went I started my car to drive to work this morning is was running pretty rough and had a popping sound coming from the tail pipe. No code registered so i...
  12. 1992 Mustang GT missing really bad need some help?

    5.0L Tech
    Hey guy ok i bought my car off my cousin who would run the car low on gas all the time he ended up thinking that the tranny was toast and i bought it off of him and found out the tv cable grommet had come off so i fixed that and ive been driving the car here and there to find other things wrong...
  13. 2005 Mustang Vert is still leaking

    2005-2010 Mustang Talk
    Here in Houston, we've been getting a lot of rain from parts of Tropical Storm Hermine hitting us. The other day, while driving down the city street, I noticed a ton of water started dripping from behind my glove box onto the passenger floor. It was really a lot of water. When I got home, I...
  14. plugs and wires help

    5.0L Tech
    hey everyone! i have been doing some research on spark plugs and spark plug wires, and all i need now is some reviews from you all. what plugs do you run, and how much gap for a an upgraded cam with 312 lift, 19# injectors, and the normal bolt on's (ie. bbk cai, bbk 75mm tb, etc? last, ive been...
  15. 2003 Mustang-3.8 V6 Spark Plug Install

    V6 Tech
    Morning guys. I've had some new plugs and wires laying around for awhile and I think it's about time I put them in my car. I have a 2003 3.8L V6 Stang and I'm looking for any type of tutorials to help me install these. I used to have a chevy and the plugs were all right on the top. I looked...
  16. what kind of plugs to run?

    5.0L Tech
    i have a 90 notchback 306. my question is i have gt40p heads. i have not purchased a set of plus for the motor yet =/..(i just finished pputting her back together). now what i dont understand is when i ask for plugs from an auto store do i ask for an explorer plug? since gt40p's didnt come in...
  17. Vortech and Motorcraft plugs 2000 Mustang GT

    4.6L Tech
    After about 4 hours of reading... I'm more confused now than I was... I'm putting a V3 on my car in the near future and I getting parts together... with 7 to 9 lbs am I safe to go with AGSF-22C gapped at .035 or should I go with the Lightning plug AGSF-12FM1... want to stay with Motorcraft plugs...
  18. Literally this isn't about a Mustang. but technically it could happen.

    Mustang Tech
    First off, I own a 2002 Ford Mustang V6 and this problem could happen to my car but this is about my girl's car which is a 1989 BMW 525i and the spark plugs are getting oil on them, I asked the mechanic who inspected the car for $80 and told me the Block is NOT cracked. What else can be the...
  19. 2001 Mustang, Rough Idle, misfire on cylinders 1 and 3

    V6 Tech
    Hey guys, well, i have a 2001 mustang convertible, and i went to get my car washed yesterday. When i left the car wash, the car started misfiring. I was wondering if someone would happen to have a spark plug diagram for the 2001 v6 mustang. Well, a picture would be better, with microsoft paint...
  20. plugs and power

    2005-2010 V6 Mustang Tech
    i have been trying to figure out what would be the best plug for power increase. Much to my dismay, lol, i have not been able to come to a difinitive answer yet. lol. soo if anyone has replaced their plugs and had a decent power increase let me know. btw i still have the factory plugs in, only...
Top