Ford Mustang Forum banner
pulley help
1-7 of 7 Results
  1. 2005-2010 V6 Mustang Tech
    Hello everyone. I have a 2007 4.0l that had a very bad squeal. I replaced the belt which fixed the noise but I noticed that the power steering pulley wasn't moving all the time. I checked it without the belt on and it moves freely and doesn't wobble. When the belt is on the pulley will spin...
  2. SVT Cobra Tech
    I replace the stock pulleys with the Steeda under-drive pulleys, after a week I decided to clean my engine with a degreaser, after this point i started having sqweaking noise from the belt, i added conditioner and the noise was still there, ohot or cold, hi or low rpms, so I was told could have...
  3. 4.6L Talk
    I got a 96 GT, and when I start it up, one of the pulley's squeaks really loud. So loud you can hear it down the street. Seems to go away after about 10-15 minutes of idleing though... I was just wondering if anyone had this happen to them, or if something is gonna break soon?
  4. Classic Tech
    I am trying to remove the lower pulley on my 67 302. I have removed the 3 bolts and nudged it a bit with a hammer but no luck. Just want to make sure I am not messing something up. I was under the impresssion that this piece is different from the harmonic balancer which is held on by the big...
  5. Classic Tech
    Hey this is my first post on all for mustangs. i have been very impressed with the helpful info people receive in regards to technical assistance. already, this site has been very helpful, so thank you. I will be restomodding my 67 mustang coupe. very excited. i used to do body work and have...
  6. 4.6L Tech
    Hey guys, I have put posts up before about my misfire issues, but when I was troubleshooting that I think I found another problem that might be related but I need some input. My 2004 mustang GT have been misfiring for some time now, it happens when driving at a steady RPM but usually has to...
  7. SVT Cobra Talk
    I bought my 03 Cobra from my friend about 2 months ago now. He changed from the stock pulley to a 2.25" pulley to make 12-14lbs of boost. The problem is I didnt help him install it and he thinks that it might need to be pushed on just a little bit more. I had to order another serpentine belt...
1-7 of 7 Results
Top