Ford Mustang Forum banner

pulley

  1. 5.0L Talk
    I'm pretty sure I have a cast iron Cleveland or Falcon water pump glued on to my 1979 302 timing cover! This thread should probably be moved to the 5.0 section
  2. 5.0L Tech
    I bought an 87 notchback a few months back and since I wasn't familiar with mustangs at the time I didn't notice anything strange. Then I started messing with underdrive pulleys and things of that nature and noticed something was strange whenever I looked up a serpentine belt diagram for a 5.0...
  3. 2005-2010 V6 Mustang Tech
    I'll try to keep it short and sweet. I have a 2006 V6 and a guy is telling me his is chipped and he bypassed the air conditioning and power steering pulleys and gained 124 HP. I don't know anything about pulleys but I do know umderdrive pulleys add a good amount of HP but 124 for bypassing AC...
  4. 2005-2010 V6 Mustang Tech
    Ok, I had a shop tell me that this is minimal wobble and it's ok. Can someone take a look at this video and tell me if it's really ok? The wobble seems much more pronounced in real life than is visible on the video. It's the harmonic balancer / pulley deep in the engine, sorry for how...
  5. SVT Cobra Tech
    Just bought a 2003 cobra and looking to do a lower pulley on it but need to know what all i need to get with or upgrade thx
  6. V6 Tech
    Hello i jus got my underdrive pulleys for my 95 mustang and i was lookin around and wanted to know what size belt to get. I know my kit suggests a 96" 6 ribbed belt. I understand the 6 ribbed part of the belt but i saw that some others that had these pulleys used shorter belts other than 96"...
  7. Classic Tech
    Hi All, I have a 1968 Mustang Convertible that I just purchased as my 1st project car. I need to replace the power steering pump pulley, but I'm having a hard time finding the part. All of the pulley's I find are for the 289 or 302 engines, I have the 200 - 6 Cylinder. If anyone has a link...
  8. 2011 - 2014 V6 Mustang Tech
    This issue is occurring on and off in my 2011 v6 mustang.. 27K miles. When starting in the morning after parked overnight or after a long time.. a shrill high pitched noise comes from under the hood / engine area. After some time, I guess, when the engine gets warmed up and gets hot, the noise...
  9. SVT Cobra Talk
    so i took my cobra into a do it yourself shop to install the bassani x pipe with high flow cats. it took a long time :/ all the pipes seemd to be very rusty and the bolts were a nightmare. held together by rust. i soaked the bolts with wd-40 but it was still very tough getting them off. It is...
  10. Introductions
    I have a 2003 sonic blue convertible cobra and I wanna do a pulley swap. Any suggestions on what size pulley and what other modifications need to come along with the pulley swap to make it run correctly.
  11. 2005-2010 V6 Mustang Tech
    Hi guys and gals. First post here. Bought a 2005 V6 with 71K miles on it about a month ago. It had hit a deer and was fixed up. Had a mechanic look at it and the only thing he found was that the belt needed to be replaced.... Last couple of days started having belt noise, primarily at start...
  12. Classic Tech
    I have a late model 302 in my 68 coupe that I converted to carb. I do the whole shebang you know what I mean it looks exactly like an original engine. Problems occurred oh did they. First off I used the 50 oz balancer that was on the engine so I know it's balanced properly but it's a 4 bolt...
  13. V6 Talk
    So I just took my fan belt off and all of my screws that hook the water pump on. After doing that, I noticed there is a metal bracket covering the water pump making it impossible to remove the pump. WTF! The metal is hooked onto a belt pulley to the right of it. Any suggestions? I either have to...
  14. 5.0L Tech
    I check the belt on my brother's 95 Mustang 5.0 and it was broken. I checked the belt and noticed that it was burnt on one side. What could've caused this problem? I never had any experience when it comes to fixing cars.
  15. 4.6L Tech
    Hello Mustang Gods, I currently have an AC compressor that's deemed "bad" by a mechanic. He's wanting to charge me close to $900 to get everything in working order. All I want is my car to run. I don't even care about AC or have the funds for the replacement. Now is there a certain length of...
  16. 4.6L Tech
    I have a 2000 Mustang GT manual tranny with 147,000 miles. Just the other day I replaced my Intake Manifold due to a coolant leak. I obviously had to remove the belt during the job. Once I was done with everything else I put the serpentine belt back on. It drove nicely the first day. But ever...
  17. 2005-2010 Mustang GT Tech
    Hey guys! I have been following this forum for a while now and this is my first post. I have a 2005 GT with the Magnacharger Supercharger. I have a 2.85" pulley, tunable inductions cai, brisk spark plugs, kenne bell bap, steeda belt tensioner with 90m pulley (no slip!), and 39 lb injectors. I...
  18. 5.0L Tech
    Recently I noticed a "squeaking" noise coming from my engine. I figured out it was the smog pump. when I spun the pulley it makes a bad squeaking sound. Do I need a new smog pump? or could I get new bearings for it? or do I need a new pulley?
  19. 4.6L Tech
    Im new to this site ive already done alot of reading and checking on some other sites and this one and i decided i like the looks of this one over the others and i signed up! I was hoping someone with a little more experience could give me some help. Ive owned a 2001 Performace Red Mustang with...
  20. Classic Tech
    My coupe has 2 pulleys on the alternator. Iv looked and cant find any other 66's set up that way. There are a total of 3 pulleys on front of water pump. The 2 closest to water pump are same size and the one closest to radiator is smaller. (small one for California Emissions - i think) Its set...
Top