Ford Mustang Forum banner

rack and pinion

  1. 2004 GT rack and pinion question

    4.6L Tech
    I've been working on my 04 GT and trying to figure out a "klunk" noise coming from my driver's side when I go over bumps. I think I've narrowed it down to my rack and pinion, but want some feedback/thoughts on my diagnosis before I throw $$$ at parts. So far I've checked and found to be OK...
  2. Rack and pinion Swap 1898 GT

    5.0L Tech
    Steering coupler bolt 1989 GT 5.0 I am at a stuck and can't get the Rack out. The problem is I can't find the tool to disconnect the steering shaft coupler that is at the base of the shaft where it connects to the Rack input shaft. Included photo So I removed the connection near the firewall...
  3. 1989 Mustang Rack n Pinion Change

    5.0L Tech
    I need to replace the Rack n Pinion. It's power steering and the seals are gone. I drove it dry until my forearms go tried. But really only a few times I lost all power steering. Questions are as follows; 1. Should I replace the power steering pump? 2. My Tie Ends just had the ball joints...
  4. 1989 GT hatch vibration in front right tire help!!

    5.0L Tech
    My 89 GT is pretty much stock I am getting a vibration at 50+ mph only in the front right tire I've checked the ball joints they are tight although I have about a 1/4" play from the arm coming from the rack to the tire is hat normal to have that much play or is my rack taking a crap? When I...
  5. 1968 mustang Fox Body Front End Swap

    Classic Tech
    So has anyone ever put a fox body mustang front end onto a classic mustang? Did it work? Was it worth it? Thanks!
  6. 1968 Mustang Front End Conversion

    Classic Tech
    So I was browsing the classifieds when I saw a 1977 Mustang 2 being parted out with no engine or tranny but had the complete suspension. Its only listed for $400. I wanna put disc brakes and rack and pinion steering on my 1968 Mustang. This sounds like a good deal to me. Is it just a bolt in...
  7. Wheel squeaks when turning

    V6 Tech
    I've got a 2001 Mustang and the right front wheel squeaks whenever I turn it left or right. Power steering fluid is full. Not sure what the problem could be, but it doesn't sound good at all.
  8. Randalls Rack replacement rack part

    Classic Tech
    I purchase a Randalls rack and pinion steering system around 2006. The rack is now leaking and needs to be replaced. I know there is a lot of similar rack that came in early - mid 90s Chevy cars such as Chevy Beretta, Cavalier, Corsica, etc. I purchased a 92 Pontiac sunbird rack and it is...
  9. 1967 Mustang Suspension Upgrade

    Classic Tech
    I'm experiencing a massively loose steering issue ever since I bought my mustang. Shes a 289 w/ power steering and aftermarket headers. I want to do a whole suspension/steering change and I have been shopping around for a while but I'm still basically a novice. Anyway I have been looking at the...
  10. 1966 Steering Upgrade

    Classic Tech
    I want/need to upgrade the steering in my '66. Previous owner cannibalized a 289 out of a '69 and dumped it into my car without doing anything else. The steering box is rusted out, weakened, and needs replacement. I'm considering 2 options: 1) replace steering box with new steering box from...
  11. 1967 R&P questions (which company)

    Classic Tech
    Hello All, I'm a long time reader, but first time poster I am in the process of re-doing the steering system on my 67 coupe and its been nothing by headaches so far. I initially wanted to just get my long shaft steering box rebuilt, but after sending it to Precision Products...
  12. will 1988 rack and pinion work in 1967?

    Classic Tech
    i have just about completed restoration of 67...put a 5.0 and t-5 form 88 in it....and power steering....from 67 era...well there is ALOT of play...i think dangerous...i still have 88 car and can steal the rack and pinion from it...will it fit? has anyone ever done that??
  13. Rack and Pinion Replacement?

    5.0L Tech
    Will this work? 1987 FORD MUSTANG POWER STEERING RACK AND PINION: eBay Motors (item 220355362267 end time Nov-24-10 15:02:27 PST)
  14. 2001 Mustang V6 rack and pinion

    V6 Talk
    I need to replace my rack and pinion. I am trying to find out if there are any other fords that i can pull this part from. PLease let me know.
  15. 1967 Mustang Coupe Steering Upgrade

    Classic Tech
    I have had my 67 coupe for about 6 months and the steering is really loose with a lot of play in the wheel. I can turn it about an 8th of a rotation before any turning of the wheels occurs. It has power steering but im not sure of much else. I want to upgrade to rack and pinion but I'm not...
  16. Recommendations for suspension upgrades on 1969 Mustang.

    Classic Tech
    Looking for suggestions for suspension upgrades on 1969 Mustang fastback. It is currently stock and doesn't work well. Most concerned about the front. It won't be drag raced or road raced. The motor is a 351 Windsor with a C6 transmission.
  17. Front end leaking

    2005-2010 V6 Mustang Tech
    Hi to all, The Ford dealer had a sale on oil changes the other day for $19.99. Shoot, it costs me that to do it myself, so I went ahead and had them do it. Upon inspection, I was told the front end was leaking, and would cost $850.00 to repair. I hadn't expected that, so I left to think...
  18. How to go from power steering to manual in a 1986 GT

    5.0L Tech
    I have and 86 gt, 5 spd, and found out that the leak I could not find was coming from the boot on the end of the rack on drivers side, And thought it would be nice to take off alittle weight and clean up under hood a little more, just not sure of what I need to do, so any help from my friends...
  19. Rack and Pinion Kit for 1967 Coupe

    Classic Tech
    I am looking for some insight as to what my options are as far as replacing the manual steering in my car with a rack and pinion kit. I have purchased all new springs/bushings/shocks for the rear which will give it a 1" drop. I would like to put a rack and pinion kit on the front and replace all...
Top