Search Results for ‘replace’

aux broke off inside the port, need a replacement aux port but cannot find one for the life of me. any advice or help would be appreciated.

Hello everyone, I just have a couple of quick questions regarding the alternator in the 3.7. My '12 needs a new alternator and tensioner pulley, and given that I'm mechanically inclined and have done a few alternators in the past, I'm not very intimidated by the prospect of doing it myself...

Looking for someone who has swapped their 4.6L Romeo heads. I need some info on brand names and good prices for either new heads or remanufactured and ported ones. Preferably ones that come with stock cams.

A few months ago someone ran there shopping cart into my car and i was wondering if the panel could be repaired or if i have to replace the whole panel. Thanks for the help

I'm replacing my fuel pump on my 2006 v6. I've pretty much narrowed it down to the fuel pump. According to my research the 2005 and 2006 models had problems with air bubbles getting into the fuel pump because of a part on the fuel pump. So I'm just going to replace the pump itself. So it looks...

I would like to get some options from members on the pros and cons of re-chrome or re-place. and by re-place i am referring to new parts. In particular I'm interested in bumpers, door handles and other minor chrome trim. My first inclination is to re-Chrome but is it worth it? Maybe new parts...

Recently started noticing that antifreeze smoke was coming out my dashboard so they told me it my heater core so if anyone can give me any advice on how to switch this out any advice will help thanks in advance

Does anyone know a good aftermarket set of lower control arms I could buy for my 2012 v6? I have the noise problem with bushings. If there is such a part, will it fix the problem I have? It's the only issue I have with my car, but other than that she is my baby. Please help haha

2002 Mustang GT I need to replace the A/C clutch and do not have the tools to drain/repressurize the refrigerant line, so I do not want to take the whole compressor out. I am having problems with just removing the first bolt to get the old clutch off. The front plate of the clutch acts like...

I've got some water getting in my 2004 Mustang GT convertible every time I wash it or it rains. Anybody have some tips on how I should go about replacing my current weatherstrip? Cost effective, Quality, DIY or pay for service? Depending on the cost, I'm leaning towards a professional looking at...

I have to replace my front lower control arms and I'm also looking to get the "]Eibach Pro-System-Plus Suspension Kit while I'm at it. Are there certain control arms that I have to get to be compatible with this kit? Suggestions welcome!

So my radiator has been leaking coolant. I took it to get checked and the mechanic says that I need to have the radiator hoses replaced. It would be a crazy amount of money for them to do it so I'd like to do it myself. I already have the new hoses. What steps do I need to take to replace them...

Hi. I am restoring my Mustang 1967. I just have to buy a new Convertible top, white. Folding window is perfect. Can you help me by telling me which one I should by? Which Brand? Thank you, Marcos

My 1999 GT Convertible had a tapping sound under the valve covers. I had a local shop on their recommendation replace all the hydraulic valve lash adjusters. I picked the car up today and now the tapping noise is coming from lower and deeper inside the block and gets much worse when driving. I...

I have a 1997 Mustang coupe, and it has over 185k miles on it, with plenty of problems. All seemed lost, but then just recently I found out a coworkers dad is parting his 1997 Mustang out! I immediately embarked on the 4 hour journey to the location of my savior Mustang to replace as many of...

So I have a 1968 mustang with a 302 and on one side of 2 pistons the lowest part of the skirt has broken off. now this is the pointed part that comes out the botton. its just the pointed part that is gone. I read that that part of the skirt is to help keep oil down. is that true? I dont have...

Hello, i had an accident and my right door (whole, mirror glass, even inside panel) has to be replaced and in my country in Georgia is only 5 of my kind mustangs, and to get it for example from USA is very expensive, so i somehow found a 2006 ford mustang wich is allmost half car (very demaged)...

so i just bought a 77 mustang mach 1. it has a 302 summit v8 and a c-4 automatic transmission. it needs the flexplate replaced. i have the new flexplate. how exactly do i install the flexplate?? please help me with this one guys.

I am thinking of replacing my gas tank with new one and new sender and such. I know there was a danger with the fuel tanks in these cars from rear end collisions, tank can open up and spill gas onto the occupants. So I was thinking of going with a safer system something like for racing. Anyone...

hi, i have a 1998 mustang. needs a little bit of body work done to it. the body pieces over the back quarter windows need replaced but im not sure how to do that.... Any suggestions??? anything would help. thanks