Hi Everyone, I have a 2011 Mustang 5.0 that was ordered new and delivered in Fall of 2010. It's probably part of the first batch off the line. As of right now, every suspension component in the car has swapped out with the exception of the front lower control arm. I know that the 2011 models...

Hi All Just after some advice on the best option for a replacement heater core in my 67 non A/C. The current one has started leaking and is the older style cooper/brass. The alloy ones most shops seem to stock appear a bit smaller and I have read that the hose connection pipes aren't in...

I was driving to work and something flew out of the back of someone's car and hit my passenger side mirror. Thankfully the mirror didn't snap off but it broke the plastic part that is holds the Mustang flood bulb as you can see below in the pictures section. :crying: I talked to the dealership...

So my 1985 mustang lx convertible needs a new dashboard. the current one is missing a dash top (i have a replacement), the air control module is cracked in half, many parts of the dash are broken or cracked, the dash lights dont work and the whole dashboard is basically falling off only being...

Due to the oxidation problem, which finally chipped the paint, I've decided to get a new hood. Just wondering how others have fared replacing their hoods and where you ordered from (besides the obvious AM and LMR). I am looking for something that looks very similar to the OEM hood but would...

Hello Ladies and Gentlemen! Considering this is my first post on this forum, feel free to tell me if I'm doing something out of line. Now, about my dilemma. I own and love a 2005 v6 Pony Package Convertible, and It's nearing its 80 000km service mark. I bought this car a couple months back...

Hi Everybody, For a long time i have been just a reader in the forum, but now its time to ask for some help. As mentioned at the title i am currently living in Muscat/Oman (Gulf), finally managed to get my second hand V6 (12k miles) around 6 months ago need some advices and clearance about...

Alright guys, when I did my suspension this winter I noticed that the ball joint boots are torn on both sides, which basically means I need to get the ball joints replaced. The ball joints themselves are in good condition, but since I am going on a 1200mile roadtrip this summer I need to get...

Hey everybody, I am in the process of removing the oil pan to replace the gasket. I have removed the tubular cross member which is located near the front end of the oil pan but still can't seem to get the pan to drop. After reading some more about others attempting the same thing, the idea of...

I had my oil changed and they also tested the battery, the print out reads: Voltage: 12.60 Volts Cold Cranking Amp Rating: 735 CCA Cold Cranking Amp Measured: 498 CCA Temperature: 98 degrees (If that was talking about the ambient temperature, that was certainly incorrect, it barley broke 75...

Hello All, My son and I are in the process of replacing the plug wires on his 99' 3.8L stang. The problem we are having is removing the plug wires on the left side (passager side) there seems to be a wire holder/seperator bracket on the intake manifold, that we cannot get loose. its right...

I'm looking to buy a "premium" deep impact blue 2014 Mustang GT and the only problem I have are the tires that don't seem so "premium" to me. Don't get me wrong, I like the 5 spoke 18X8 wheels but I don't like the 235/50/18 tires on them. In my opinion, I think these tires are too narrow and...

I have a 2004 Mustang GT. Both of my mach Tweeters are blown by the side mirrors. Where's the best place to go for replacements?

I just bought a used low pressure a/c line on ebay. Great deal ($25) especially when new run around $100. Anyways, I'm going to attempt to swap this out myself. I have a few questions. 1) Is this a driveway type job? Can I handle doing this myself? I'm no mechanic but I can do your basic...

2003 GT. I'm trying to get my oxygen sensors and I'm getting frustrated. Don't want to drop my exhaust. I can barley get to my front 2 sensors. Any suggestions?

I am going to replace the top on my 1991 vert myself. I have seen a few threads on here about different vendors but I haven't found the feedback I am looking for. Basically I want to hear from someone who purchased a top from a vendor and installed it, or had it installed. I want to know how...

I've got an 09 GT and I am throwing the Exedy 350 stage 1 clutch in it. This is my first clutch replacement and have researched tips and tricks and have the workshop manual to use. The tranny is completely unbolted and ready to drop. Only problem is that it will not drop out. Every bolt is out...

Hello everyone! I was wondering if I could get some advice. Recently the rear window of my 2005 Convertible V6 Mustang was smashed. I was looking online and came to find out that if I wanted to get the window fixed, I would have to replace the entire convertible top. I was looking around and...

Hey guys, I'm new to this. I am 16 years old and just received a 2005 Mustang GT. I'm not too good at talking cars, but it's a 5.8L V8 with cold air intake. Anyways, I have a slight problem. The rims on my mustang say they are OE Racing, and have black center caps with their logo which I presume...

Hello! I am new to the forum so please bear with me! Today my check engine light came on and I hooked it up to the computer to find out the thermostat is bad. Is there a step-by-step out there that can walk me through replacing it myself? Parts excluding coolant are about twenty bucks, and I...