Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. 2005-2010 Mustang GT Tech
    We got new cams for our 2005 4.6 3V (100K miles on it), and it ran great for 200+ miles, then a rocker broke, and a spring came loose. Brenspeed says the cam is 100% compatible (nothing special required) and not the cause of the problem. I sure hope they are right. At the time code reader...
  2. Classic Tech
    For my build I'm going with the Lunati Voodoo rockers and I'm curious if they will fit fine underneath the stock sized valve covers? Most of the covers I've seen come as either 'stock' or 'tall' though I've read that there is also a middle ground option that some manufacturers have. Just wanna...
  3. 2005-2010 Mustang Talk
    I have a 2009 GT Convertible - Instead of the "GT" fender emblem it has the horseshoe shaped 45th Anniversary Emblem. I am thinking about getting rocker stripes that say, "Mustang GT" across the door. Opinions?
  4. 5.0L Tech
    i decided that before i upgrade my cam that i would upgrade the roller rocker arms to open up the power in the cam i have now. i was wondering first off what size ratio rockers come stock in the 91 mustang and what i should upgrade to to get the most bang for my buck. i have heard that they came...
  5. 5.0L Tech
    im looking to put a F303 cam into my 89 notch and i was told you cant use the stock heads with this cam along with the stock rocker arms is this true? i heard stories with people getting away with leaving it all stock basically. and if you had to change the heads would you beable to use the GT40...
  6. Classic Talk
    How to remove and reinstall the rocker panel moldings on a 1966 Mustang coupe?
  7. 2005-2010 Mustang GT Tech
    I am going to install these cams myself so I am trying to do a lot of reading and thinking and planning about what I am going to do to install them. I cannot find a write up anywhere on how to install them. I know they are NSR so could I just use the frpp hot rod cam Ford instructions to install...
  8. 2005-2010 Mustang GT Tech
    Hey, I see that brenspeed makes a n/a cam and a supercharger cam. I really want a set of detroit rockers, but I don't know what to do. I am currently n/a but I want to eventually fo FI so is it ok to get the n/a cam and then just supercharge it when I can OR could I run the FI cam until I...
  9. Classic Tech
    I have a tapping in my the 73 302 that I rebuilt. I torqued the rockers to 20 lbs. The cam is new and the lifters are new. The push rods are the same. Non of them were bent. It is on the passenger side. Doesn't seem to be an exhaust leak. The motor has ran for about 20-30 minutes total...
  10. 5.0L Tech
    i see these on summit Proform 66878 and are 175.00 on summit i herd there made in china and cheap but the cobra crane 1.7s are 260.00!! and im on a budget Proform 66878 - Proform Pedestal Mount Extruded Aluminum Roller Rocker Arms - Overview - SummitRacing.com does any one use these, are they...
  11. 5.0L Tech
    so i bought a cobra intake and gt40 heads coming soon i want to know if i should get a cam or 1.7 or 1.72 rocker arms and what else i will need to replace(pushrods lifters rocker arms) i just want to no what is better 1 performance 2 drivable 3 sound 4 street-able 5 price 6 rpm range thanks...
  12. 5.0L Tech
    i have a 1995 mustang gt 5spd 5.0. ok heres my speel. when i start the car its fine and all just driving easy everything is perfect. BUT when i give it like 3/4 throttle theres a chriping sound almost like metal on metal. it also makes the same sound when im off the gas and still in gear slowing...
  13. V6 Tech
    I really want to buy some from "Tom Morana V6 Racing"! Has anyone ever used these or had any problems with these rockers? They claim to add 15-18HP! Not too bad for $350. A little pricey but relatively easy install... So can any give me any info or experience with the 1.8 roller rockers from...
1-13 of 13 Results
Top