Ford Mustang Forum banner
roller rockers

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Classic Talk
    Hello, I am having issues with clearance for my valve covers because I have ProComp roller rockers with a 1.72 ratio. I have seen valve covers on CJ Pony that are listed as tall and some that are slant edge, but none of them give the specs for the internal height. Does anyone know which type...
  2. 5.0L Tech
    A guy around me has a set of comp cam roller rockers (used) he says they will fit Chevy and ford smal blocks part # 1043-16 what exactly do roller rockers improve and shoud I buy them he wants $180 says they're lightly used
  3. New Member Introductions
    Just bought a '93 5.0 and noticed some knocking coming from the air box. Long story short, found 2 bent push rods on the 3rd cylinder. I know the car has a cam but i do not know what kind and i have elected to replace all the push rods and just 2 roller rockers. I am not sure what the...
  4. 5.0L Tech
    trying to decide on what rockers to run on my car, its speed density, has gt40p heads, explorer intake, and i have a computer for it that is flashed for a 302 with a B cam. What im wondering is if anyone has used the stock 87 cam with 1.73 rockers, ive calculated the lift out to be .4779 which...
  5. V6 Tech
    Has anyone ever tried using pedestal mount roller rockers from a V-8 5.0 in the 3.8 V-6? The mount setup appears to be the same from what I have read but I haven,t seen anywhere that anyone has successfully tried it. Looks like it should work but buying 16 rockers to get 12 would be pricey...
  6. 5.0L Tech
    my name is chris im 19 i drive a 95 mustang gt with the 5.0, it has flowmasters, cold air intake, gt-40 heads, and smog delete. in the near future i plan to put roller rockers, cam (maybe), upper/lower intake, throttle and other simple bolt ons. also, quick question about the gt-40s, i know...
  7. Classic Tech
    This might be a stupid question: can I use Chevy rocker arms on a Ford? I am looking to upgrade to a full roller setup but my heads are not milled for guide plates and use the old style rail type rockers. Instead of disassembling the top end and getting them milled, I was looking for a roller...
  8. 5.0L Tech
    hey i have a 302 that im buildin... its an H.O. trw forged pistons afr heads with 1.6 roller rockers, edelbrock performer intake, holley 600 cfm carb with vacuum secondary... i was wondering what cam would be the best for this set up.. i love the agressive sound of the x303 but i have heard the...
  9. 5.0L Talk
    Wondering if i have to get new push rods Ive got edelbrock performer 60379 heads Crane 1.6 RR COMP Cams 1052-16 - COMP Cams Aluminum Roller Rocker Arms - Overview - E303 Cam If so can someone supply me with a part number.
1-9 of 9 Results