Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 22 Results
  1. 2011-2014 Mustang GT Tech
    How's it going Mustang Family! Finally found out how to post my first tech thread lol So what's going on with my GT is that when I'm at a complete stop and I ease off the breaks just a little bit, my car moves forward but starts to jerk or bounce while moving. I don't know if this may be a...
  2. 2005-2010 V6 Mustang Tech
    Hello, I recently bought a 2006 Mustang that came with 2 sets of rims/tires. I drove it home with factory rims and regular tires, I quickly took it to a wheel shop and put on very clean low profile rims with performance tires and I have noticed my wheel shakes when going around 50mph. I have...
  3. V6 Tech
    Okay... straight to the point. At around 1,500 rpm, my shifter handle starts shaking left to right fairly bad, but only at slight to around 3/4 throttle. If I floor it, it stops. If i let off the gas or push in the clutch, it stops. It happens in every single gear, but not in neutral. It doesn't...
  4. V6 Tech
    Hey guys. I drive a 1998 v6 5 speed, nearly bone stock (Cold Air Intake) with 185k miles on it. Every once in a while the car would shake a little at idle, but now it almost always shakes (worse than before) when I'm idling, whether I'm holding the clutch in or sitting in neutral. My idle is...
  5. Classic Tech
    Hey all, So I've been trying to narrow down a problem I've been having for some time now. The 65 starts vibrating at roughly 50 mph and up and I cant seem to figure out what it is. The vibration is not just felt in the steering wheel but mostly the entire cabin and such. I think it might be...
  6. Classic Tech
    Hey all, At around 50 mph the car starts vibrating. Its not extremely violent but its very noticeable, I drive faster it goes away, I drive slower it goes away. The car has had an alignment, balancing, 4 tire replacement, new lower control arms, new sway bar, replacement of bushings in the...
  7. V6 Tech
    I just bought this mustang, I replaced the plugs and wires, replaced the right manifold and valve gasket covers.. it idles rough, the car shakes and It's awful while driving down the road. Once I hit 50mph it sounds like a freight train. I have been reading about the when valve and dpfe.(or...
  8. V6 Tech
    Hi All, I just wanted to say I love my Mustang and I'm saddened by the fact that my first post here is about an issue with it. So today my car started idling really bad as it goes between around 600-1500 RPM and it shakes really badly the entire time. Driving at speed seems to be fine it's just...
  9. New Member Introductions | No Tech Questions
    hi there, i have a 2002 crown vic police interceptor. the engine doesn't miss or shake when idle but when i start driving and get past a certain rpm range is starts stumbling and shaking and i dont have the power i should but the check engine light is not coming on. I have changed: brand new...
  10. Classic Tech
    I have encountered a recent problem where, when stopped, my car has been stalling and after the stall it is hard to start again. It also seems to hesitate when taking off (almost as if its laboring in first then pausing for a second between first and second gear, but this is not a new issue). It...
  11. 4.6L Tech
    I have a 2000 Mustang GT with a manual transmission and about 155,000. At random times, when I start my car up after sitting for a while, the engine will shake when I start to drive off. It only shakes when I am first driving off in 1st gear around the 850-1200 RPM mark. Once the car warm up for...
  12. V6 Talk
    well for awhile i thought i was just getting use to the power , then i drove my friends car and dam , my mustang has lost power. I cant find any loose wires, no arks , no odd sounds just shakes when you have it in nutral above 1700+ rpm. no codes back either, was thinking mabye coil is misfiring...
  13. Classic Tech
    Hello ! im new to all this ! joined in hopes of getting some input on my problem! so i own a 1966 Mustang Coupe Straight 6 engine. the other day i was driving to work going about 65mph and then my whole car started shaking , it felt like i had a blow out so i pull over (with my car still on)...
  14. V6 Tech
    So i am new to AFM, so shoutout to tht. My car really seems to shake/vibrate around 40 mph before it shifts. Any idea on what that might be? Also throw a couple of inexpensive mods in there. I am a college kid working full time so you could imagine the budget im on. :bigthumbsup
  15. V6 Tech
    I have a 1994 Mustang 3.8 V6 convertable with approx. 159k miles and under moderate braking the frontend of the car shakes violently that can be felt through the steering wheel, its not as bad under light or hard braking, I have already repalced both lower ball joints, short of just redoing the...
  16. 5.0L Talk
    Hey everybody, new member but not new to your forums. They have helped me through many mods. I'll try to get my foxbody details posted in what I'm guessing is the signature. But to the point, due to a new busy job and having two kids I (for once) put my stang in a garage to swap my clutch since...
  17. 4.6L Tech
    I have a 2000 Mustang GT manual tranny and 145,000 miles. Recently I got the A/C up and working again due to a low pressure switch being faulty. Since then, anytime I am coming to a complete stop a loud shaking noise goes off in the rear of the car. I've been able to tell that it happens the...
  18. 2005-2010 V6 Mustang Tech
    I just had my whole engine replaced under a limited warranty by my Ford dealership (Planet Ford in Humble, Texas). I drove the vehicle home on the freeway, and when I got pretty far away from the dealership, I noticed that the car was shaking pretty good towards the front of the vehicle when I...
  19. Classic Tech
    Hey everybody, I am having trouble with my '69 Coupe 351-4v. I recently rebuilt the motor. I was having a vacuum leak in my Holley 600 side hung and recently switched to a Holley 750 vacuum secondary carb that I had laying around ( I have 4 lol). The engine runs fine and pulls good vacuum at...
  20. V6 Tech
    Hwy, Everone. Im new here :winks Im having a really bad problem with my 2000 3.8 engine Stang. It shake really bad, especially during acceleration. The only time it really calms down, a little, is when the cars stops accelarating and just coasts. I have changed the spark plugs, wire, and the...
1-20 of 22 Results
Top