Ford Mustang Forum banner


  1. Fitting Lowering Springs

    5.0L Tech
    Hello 5.0L Tech! So i ordered the Bilstein B12 Pro-Kit from and am having the hardest time trying to fit the new springs. The spring compression tools ive tried to use havnt worked, the internal one i was going to use, I wouldnt have been able to remove it after installing the...
  2. New England Spring Cruise

    New England
    Saturday May 23!
  3. Need good machine shop in Houston TX area

    Classic Tech
    I'm looking to get some minor work done to the head on my '66 I6. I was wondering if anyone knew of a good machine shop in the Houston/Woodlands area, that does good work. Thanks
  4. What is this part?

    2011 - 2014 V6 Mustang Tech
    I found this on the Left side of my my driver side floor board the other day. Everything seems to be functioning normally, including hood release and clutch petal. I'm hoping it didn't even come from my car but I've never see it before. Appears to be a spring and some sort of sleeve. Anybody...
  5. 2014 Broken Strut.. Self inflicted, Please help *Pics*

    2011-2014 Mustang Talk
    First off.. I'm pretty embarrassed for having to make my first impression this way... I'm a long time ''learner''on this forum and unfortunately put myself in a position tonight where i need to break my silence and ask for help.. Any and all feedback is appreciated, even a little bashing is...
  6. New England Spring Cruise 2014

    2011-2014 Mustang Talk
    Hi Folks, Well it's time for another road trip and GT1120 and I are inviting you to join us on the Club Mud Spring Cruise. We are going to have it on Saturday June 7th (rain date Sunday the 8th) and we are going to do the same route as last year: More details will...
  7. Mustang 2006 Bushings and Springs Coil Change

    2005-2010 V6 Mustang Tech
    Hello everyone, I'm new to the forum and I am 21 years old. I'm still learning the basics about cars and have been reading a lot, but I find myself a little confused. I have a 2006 V6 4L mustang. Recently took it to the dealer for a check up and they told me I need to change my coil springs and...
  8. Horrible Front suspension Problem with a '92 Hatch

    2.3L Tech
    Ok so the car in question is a 1992 hatch 2.3L that I bought 2 years ago for my first car. Its been a blast to drive but lately I have noticed a problem with the front passenger side suspension. When I go over a speed bump the driver side handles it just fine but the passenger side just "drops...
  9. OEM spring rates

    2005-2010 Mustang GT Tech
    Anyone know the OEM spring rates for the S197 GT coupe (2006). Also are they progressive springs? Someone just told me the were like 320lbs/ich front, they seems high to me for an OEM strut.
  10. Question about 1972 Mustang door latch

    Classic Tech
    Hey everybody, So is it conceivable that I could replace my driver side handle and door latch on a 72 coupe? I can find the parts. Im assuming there is also an internal spring for the mechanism as well would that come with either of those two pieces? Or would it likely need to be purchased...
  11. v6 mustang 2006 door handle loose/not retracting all the way

    2005-2010 V6 Mustang Tech
    Hey guys I'm new here and this is my first thread i hope in doing it right. Anyway i was wondering if anybody could help me with a small problem I'm having. My door handles work fine but when i open the door on either side the handle doesn't get in all the way without me pushing it. There is...
  12. Unused Spring Near steering column 1965 coupe

    Classic Tech
    Today i noticed something rattling in my car as i drove coming from the area near my steering column. I looked to find that it was a hooked spring that was not connected to anything at one end. From what i can see it looks similar to a clutch pedal spring something like this...
  13. 1965 289 2 barrel throttle link diagram?

    Classic Tech
    1965 289 2 barrel throttle link diagram? If this is posted elsewhere I apologize, but I could not find it using the search feature. I have a 1965 289 with a 2 barrel carburetor and the throttle spring is broken. However, I do not think it was setup properly by the former owner. The broken...
  14. '67 door latch spring and locking issue

    Classic Tech
    I took out my latch assembly today and i believe there is a spring missing. I circled the spot where I think it should go in the picture below. Is that the correct spot to put a spring and is there any more that I might be missing? The problem is that the latch doesn't actually latch onto...
  15. e-brake spring and brake dust

    V6 Tech
    I was replacing my brake pads and I removed the e-brake spring for better access to one of the bolts, only to find out that it's not easy to put the spring back on. So the rear-left brake caliper does not have the spring on it. Then I started noticing too much brake dust on the left front wheel...
  16. NW Houston Here

    Looking to meet up with other Mustang enthusiasts in NW Houston.'s show 'em off and get to know each other! Let me know if you're interested! D
  17. 1966 front end lowering options

    Classic Tech
    HI, I have a 1966 GT Convertible. I wanted to get a more aggressive stance out of the car, so during my suspension upgrades I installed new springs that were "supposed to" lower the fornt end 1". I think they did their job, but I'm still not satisfied. I'm looking to get another inch or so...
  18. 1971 "Spring Special" Mustang info?

    Classic Talk
    So my dad just bought a project car, a 1971 Spring Special Mustang. But I can literally find NO information on the "Spring Special" Mustang online. The only thing I can find is a old magazine add, Can anyone tell me any info you...
  19. Help with Accelorator spring

    Classic Tech
    I am fixing up my 1967 Sport Sprint Coupe and took the carb off (289 2 barrel). When I went to remount it I forgot how the spring (for pulling back the pedel to idle speed) is connected exactly. I tried every combination of ways to connect it but the spring still catches on the carburator and...
  20. After market hood and hood spring install questions.

    Classic Tech
    Im working on getting the chassis lined up to the point were the fenders fit nicely with the hood. I was measuring out the center of the hood when I noticed that the hood pin was not centered... its actually a quarter of an inch off. That and I just cant manage to get the hood dead center with...