Ford Mustang Forum banner

starter problem

  1. 1993 F150 with a SN95 5.0 starter issue

    5.0L Tech
    I have an issue with my starter. I Replaced the starter about 6 months ago when the truck still had the stock motor in it. Now this week I just finished the SN95 motor and got it running, and when I first started it I had no issues but after the first start the starter gear does not retract all...
  2. starting issues!! Brain rattling!!

    5.0L Tech
    5th times a charm? NOT!! My cars had this intermitted starting issue. I've replaced starter solenoid (fenderwall) battery, battery terminals, dist. cap/rotor msd on stock dist. with new module. I can start the car 4-5 times on/off and on 4-5 time it won't start barely cranks then drains battery...
  3. Need Help,starting problem!

    5.0L Tech
    at night my car will not start after the engine warms up,it acts like the battery is dead,after allowin the motor to cool down 30 or 40 degress it starts just fine.what could cause this,along with dim headlights and the radio shuting off during the problem time? PLease Help!!! as this is my...
  4. Mustang 1994 V6 how to get to Starter

    V6 Talk
    my starter went out on my standard 94' V6 mustang today. i know this because when i put the clutch in and turn the key, there is no crank. its just the same as when i try to start the car wit the clutch out. it wont work. my battery is fine! and no other connections seem to be out of whack. i...
  5. '65 starter not engage to flyweel

    Classic Tech
    Quick question. When turning the ignition key, I hear the starter motor spin, but it does engage to the fly wheel (high rpm electric motor noise only). I took the starter motor out and connected it to an external starter pack (battery). the starter drive spins, but the sprocket does pop out...
  6. please tell me my Engine hasnt seized

    5.0L Tech
    Hey guys i'm new here i just bought a 87 5.0 that was completly gutted and had been sitting for a while. I towed the car to my house because at the time it wasnt in starting condition. I started by getting new plugs and battery, then fixed some trouble i was having with the fuel pump. After i...
  7. 1966 Mustang Starter Noise

    Classic Tech
    I just rebuilt and reinstalled a 289 into my 1966 convertible with a C-4 transmission. When I start the engine there's a loud clicking noise that appears to be comming from the starter. I pulled off the lower cover of the flywheel and it appears that a flywheel counter weight is hitting either...
  8. 1987 5.0 t-top mustang is having the starter hesitate on disengaging, even new parts

    5.0L Tech
    the car: 1987 mustang GT T-top 5.0 speed density the issue : one day it just started doing this. it fired right up just like usual except the starter did not pull itself out of the flywheel immediatly. so for 3-4 seconds you hear the starter gringing in the flywheel and then it CLICK pops the...
  9. 1996 Mustang 4.6 GT Starting Problem

    4.6L Tech
    My 96 GT isn't starting right away like it should, particularly after it's been running/driving. I have to crank it for a second or two, shut the key off, and re-crank to get it started. I hypothesize that it's a fuel delivery problem, perhaps a pinhole or crack in the fuel line. Has anyone...
  10. 1965 Mustang Starter won't disengage

    Classic Tech
    I have been driving my 1965 Mustang for 5 years with no problems until last winter (which is when i store the mustang) i went to start the mustang after it had been sitting for about 3 months and the starter would not disengage. To stop the starter from spinning (once it is stuck) i...
Top