Ford Mustang Forum banner

stock

  1. High School 2001

    High School 2001

    My 97 GT when i was in high school
  2. 2011-2014 Mustang Talk
    BLUF: Can I get stock part numbers for a pressure plate, bolts, disc, pilot bearing for a stock '12 GT and/or Boss from someone here? Long version: I have a '12 GT that I'd like to have a clutch ready to install when my current begins to fail, but the options are staggering. The difference...
  3. 2011 - 2014 Mustang GT Tech
    Hi guys, I am in the UK and have a 2011 Mustang GT. I've just installed a late 2014 crate engine (guessing late 14 by the different dipstick) into it as the last one died. However, we cant get the crank sensors to relearn and we've tried everything, revving it higher, taking it for a drive...
  4. 4.6L Talk
    Hey all, I've been reading this forum for months, but this is my first post and I'm not too sure how to "search" on the forum other than using the Google search bars which don't help... So if this has been asked before, my apologizes. To cut to the chase, I currently have stock exhaust on my...
  5. 4.6L Tech
    Hey guys, I recently got my 2000 Mustang GT (5 speed) out of storage from the winter, and I now notice a ticking noise under load most noticeably in 1st and 2nd gear above 2.5k rpm (Does not make the noise on Deceleration). The Car is near stock besides a new CAI, Muffler Delete, and Stage 2...
  6. 2011 - 2014 Mustang GT Tech
    which one is better and will last longer, spherical bearings or the polyurethane bushings or is there really a difference? 2012 5.0 stock suspension side note: may add lowering springs and new shocks/struts if that matters
  7. 2011 - 2014 Mustang GT Tech
    Got a 2012 5.0, with aftermarket cold air intake and tuner, everything else is stock. Car came with 3.15 gears and tiger paw gtz tires. i'd really like to change gears and work on the suspension but i'm not in a hurry. SO question is what are some of the essentials to reduce or eliminate the...
  8. 2005-2010 V6 Mustang Tech
    I did a full tune up to my 2008 V6 4.0L mustang not to long ago Including: oil change, new spark plugs, new filters, new brakes. It started having an RPM issue. They seem to go out of control when i turn it on and quickly shoot up to about 3,000 when i barley touch the gas peddle, or shoot down...
  9. V6 Talk
    First off I would like to say I bought my first car after my truck got stolen (won't get into details). So I bought a 2002 Ford Mustang V6 so I can go to college. This is going to be my daily driver but I want it to look nice and sound tough. So the reason why I am here... What can I do to give...
  10. 4.6L Talk
    I know, my own fault for not checking they were matched before hand, but I guess I just assumed they would be. The current tire sizes are as follows: Driver Front: 275/35/R18 Driver Rear: 285/35/ZR18 Pass Front: 275/35/ZR18 Pass Rear: 285/35/ZR18 So the rear tires are both the same, and I'm...
  11. Introductions
    Hi everyone, I'm David from France. I found my Mustang in a junk yard in April 2008 and bought it immediatly. Since, I did a new paint job and tuned up the engine. Now the car looks really great and works good. My model was sold new in 1981 by a Swiss Dealer near Geneva. The second owner...
  12. 4.6L Tech
    I have a 2001 Mustang GT Convertible and am trying to figure out what pistons the stock 4.6L engine comes with. Forged, cast, or other?
  13. Introductions
    Been a Mustang fan for 5 years. I was finally able to purchase a 6 speed 2012 Mustang Gt in Sterling grey metallic about a week ago. This is my dream car. The extent of my mods are probably going to be a cold air intake and exhaust and a tune, And then I don't feel that I need to do much else...
  14. 2011-2014 Mustang Talk
    So I finally took my 13 5.0 to the track today. The track is County Line Raceway. A 1/8 mile track located in Miami. They had a special event tonight called street racing made safe in which you can do a 20 or 40 roll. Apart form my wheels and suspension my Stang is pretty much stock. I ran a 12...
  15. Introductions
    Hey how's everyone doing? Names Ed and Im new to all this forum type of stuff. I also just bought a 1987 white mustang gt with t-tops, it's a 5.0L with manual trans. My thoughts about it would be convert everything exterior to the cobra style and make the engine and trans fast and loud on...
  16. Audio, Video, Navigation & Alarms
    Shaker 500 + 150 Project I have a 2006 V6 Mustang Convertible with the Shaker 500 stereo system. Overall not a bad setup for a factory system, but it lacked deep bass, as the door ‘subwoofers’ didn’t handle frequencies below 80Hz very well. Being a convertible, and having limited funds, I...
  17. 5.0L Tech
    i have a 1989 GT 5.0 and i was just wondering it they made those with a limited slip or positraction rear end. and also what the stock gears are for this year?
  18. 2011-2014 Mustang Talk
    Hey all, So I've been the proud owner of 1999 Electric Green 3.8L Mustang for almost 2 years now, and I think it's about time to do something about those stock wheels. See, a couple months ago, I stumbled upon a stupid good deal for a set of four 17" black Bullitt OEM rims and tires (245's in...
  19. 2005-2010 Mustang Talk
    Has anyone switched back from their halos to the stock headlights? how hard is it to switch? (dad installed the halos and said wiring was a bi#%$)
  20. 5.0L Tech
    trying to decide on what rockers to run on my car, its speed density, has gt40p heads, explorer intake, and i have a computer for it that is flashed for a 302 with a B cam. What im wondering is if anyone has used the stock 87 cam with 1.73 rockers, ive calculated the lift out to be .4779 which...
Top