Ford Mustang Forum banner

street/strip

  1. 5.0L Tech
    Hello! I hope i'm posting this in the correct spot, I have a few questions about making more power out of a 1993 302 block. I am new to these threads and here is my story: I have a 1993 Ford 302 engine that needs rebuilt so i decided while it was out, i would do a cheap build for reaching the...
  2. Introductions
    Hey everyone, I am new to these threads and here is my story: I have a 1993 Ford 302 engine that needs rebuilt so i decided while it was out, i would do a cheap build for reaching the 300 hp goal. I was wondering how hard that would be on a $1,500 dollar budget. I need to know things like...
  3. 5.0L Tech
    Just finished installing my tci street fighter transmission a couple weeks ago and i went to drive it on the freeway and i could not do no more then 60 maybe 70 pushing it with the high rpms had to bring it down real quick, i have 4:10 gears and a 2500 stall in it with shift kit motor has a few...
  4. 5.0L Tech
    i just took out my aod tranny and try putting the c4 but the cross-member to the aod will not let the c4 tail end sit on it properly so do i need to get a c4 crossmember and does it matter what years and what kind if so? the tranny is a tci....:?::?::?:
  5. 5.0L Tech
    what kind of cross-member do i need for the tci c4 tranny? cause the cross-member i had on the aod tranny will not work :?: Also what kind of flywheel do i need the 157 tooth i know but what oz?
  6. 4.6L Talk
    I'm sure I am stirring an old hornets nest but here goes. As the signature says I just got a gt (4.6 2v). I'm in an enviable position, plenty of cash and my car is just my toy. More often than not I have heard the 2v 4.6 called anemic and worse. So I am looking for reccomendations from those...
  7. 5.0L Tech
    I was thinking of putting a Z-303 cam. into my 306 motor that has gt-40p heads, 1.6 roller rockers, rpm air gap intake, 650cfm carburetor, racing AODE trans, and 3:73 gears. Right now I have the E-303 cam and its too mild for me! Was wondering if someone has put in a Z cam in and what they...
  8. Classic Tech
    im new to this scene. i picked up my 68 mustang about 3 months ago and decided to build an engine first. i picked up a 351c 2v, and a c6 with 56k for fairly cheap as a pair. the cleveland was in not so hot shape so i decided to go for a full out rebuild. so far i have: -bore + .060 bearings...
Top