Ford Mustang Forum banner

suspension issues

  1. Airlift Performance Suspension issue

    Mustang S550 (2015+ Mustangs)
    I have fitting the Airlift Performance Suspension with V2 controller to my 2016 GT, and on relatively smooth roads, between 50 - 60 mph, I experience a floating sensation in the rear (left - right -left). The car has been wheel aligned and tire pressure is around 36 psi all round. I have tried...
  2. Where Is This Grinding Noise Coming From?

    4.6L Tech
    I have an automatic 98 GT, there's a grinding noise coming from underneath center console/front passenger area whenever i make a hard left turn(only when going a kind of fast) or go up a driveway turning left. The faster i go up the driveways the louder the noise. I have no problems making right...
  3. 2000 rear suspension is terrible

    Superchargers+Turbochargers
    I have A 2000 v6 and its rear suspension is just awful. I hit a bump and the whole back end sways back and forth up and down like I'm on a roller coaster. I'm saving up for a rear sway bar (sense these cars didn't come equipped with them) and I was just wondering if anybody had any tips on how...
  4. 1998 Mustang - Need help combining suspension jobs efficiently

    V6 Tech
    I took my 1998 Mustang to the shop due to a leaking manifold gasket, and while there the mechanics gave me a laundry list of undercarriage issues to deal with. I just spent a bunch of money on the engine, so I thought it best to decline the other jobs and just do the work myself. I am a...
  5. Suspension Gets Stuck!?!

    SVT Cobra Tech
    Hello all, This is my first post so I apologize in advance for anything done wrong. I have a 1994 Mustang Cobra and today on the way home from school I noticed a bit of a bumpy ride. When I pulled into my driveway, I had the wheel cranked hard right and the tire hit the inside of the fender...
  6. 1999 GT Convertible 5-speed shocks and struts replacement

    4.6L Talk
    I am new to this forum and i hope im doing this right... Basically i have a 99 gt convertible 5 speed that needs new shocks and struts, there are a tons of threads and write ups on how to do the installation and removal but all of them are for hard tops. Is there anything i need to know about...
  7. 2011 Mustang GT lurching under braking after Eibach Sportline Spring install.

    2011 - 2014 Mustang GT Tech
    I have recently installed Eibach sportline springs in my 2011 GT coupe and there is much less nose dive under hard braking but at full stop the car returns feedback of a "rocking horse" forward to back type motion. I have rechecked and retorqued all the bolts and the car still responds the same...
  8. Help 05 Mustang V6 Noise

    2005-2010 V6 Mustang Tech
    We just bought my daughter an 05 mustang for her 16 birthday. About a week after we bought it, it started making a weird noise at 45mph +. The best way to describe is a vibration type noise that sounds then quits sounds then quits. I thought it was a tire but both front tires look fine. It...
  9. How To Soften Ride 2008 Mustang GT

    2005-2010 Mustang GT Tech
    Hi everyone - I'm hoping for some suggestions about how to soften the ride in my 2008 Mustang GT. It's 100% OEM at this point and the rear shocks/springs are too stiff for me. I have not looked to see what kind of shocks it came with but I assume they are OEM. Can the OEM shocks be adjusted to...
  10. 06 mustang v6 suspension replacement

    2005-2010 V6 Mustang Tech
    I currently have an 06 Mustang and its starting to ride like Im driving through potholes(that may be an overexageration but we know the mustang ride is rough enough). Ive taken it to several shops thinking it was shock/struts that needed replacing but ive been told by several mechanics that the...
  11. I need help with 1997 mustang upper and lower ball joints

    V6 Tech
    Ok. I've been looking all over the web, and the only results I'm getting are for lower ball joints. Are they the same as the uppers? My machine creaks like it's made of wood every time there's any weight shift at all, and I've got it on pretty good authority that means my ball joints are toast...
  12. 2000 Mustang GT, Rear End Issues, Need Help

    4.6L Tech
    We bought this 2000 Mustang GT from a kid a year or two ago. It has been a nightmare. He lied big time. The motor has been swaped out with what i know isnt a mustang motor. Tons of Problems with that. Interior was all swapped out with 1996 or a 1998 Mustang GT. Even the rearend was swapped out...
  13. 1998 GT rearend on my 1996 V6.

    V6 Tech
    So as I mentioned in another thread I bought a 98 GT coupe. The GT was in a wreck and the frame's bent a bit so I'm planning on just swapping everything over to my 96. I don't know much about mechanics so I'm gonna let one of the local shops do the swap. To keep the costs reletivly low I'm gonna...
  14. 1988 mustang GT 5.0 front end noise

    5.0L Talk
    whenever i drive over bumps of any size there is a loud noise that sounds like rattling from the front end. I can feel it a little in the firewall, however when i lift the car and grab parts nothing seems to rattle. I recently replaced the bushings on the sway bar and sway bar stabilizers. has...
Top