Ford Mustang Forum banner

suspension upgrade

  1. New to the Forum. 96 gt convertible handling issues

    4.6L Talk
    Just joined the forum, my name is Levi. I have a 96 GT Convertible. So far I've switched the K-member out for chrome molly tubular, as well as the A arms and installed a coil over in the front, bump steer, caster-camber plates and a new steering rack and hydroboost. The rear of the car I also...
  2. 1969 Mustang Suspension Upgrade?

    Classic Tech
    So one of the first things I'm going to do with my mustang on my own is suspension work. However, I don't know where to start. Is it a good idea to just get a suspension kit. I just want to freshen up and modernize the suspension so it handles corners well and is more fun to drive :) I'm...
  3. 1968 Mustang Coupe Brake/suspension replace

    Classic Tech
    Hello this is my first build and im lost right now and i need help with parts for replacing the rear drum brakes or would it be cheaper to convert. and im trying to lower the front so its the same height as the rear, and lower it all 1' and replace all of the suspension. what parts do i need...
  4. 1966 Mustang l6 to v8 swap questions

    Classic Tech
    Hey guys, I am looking at swapping my l6 to a v8 right now, but I dont have the finances to do it all at once since I am only 17:sadcry: My question is can someone give me a list of what all I need to change to get to be able to drop a v8 in there? Also can i get the v8 parts slowly, 1 at a time...
  5. Upgrading to Boss 302 Suspension - question on install

    2011 - 2014 Mustang GT Tech
    I just bought the springs, struts, shocks, rear sway bar, etc from a brand new Boss 302 owner that removed them immediately after delivery. I want to get my GT to handle as well as a stock Boss so I know I also need to replace some suspension bushings, but have no idea which ones I would need...
  6. looking to upgrade my suspension

    2005-2010 Mustang Talk
    I'm looking to redo my suspension on my 09 gt the stock is lets say not so good i bought ford racing k springs awhile back but never put them on because I've been waiting to see what else i should do while the spring get put on (shocks, control arms, sway bars etc) I've had my heart set on the...
  7. Eibach PRO system it installed, now a few issues:

    2011 - 2014 V6 Mustang Tech
    I installed the sway bars, springs, and damper system this weekend. The Pony handles great, much better than before, BUT: I have an annoying knocking in the rear every time I hit a little bump. I have looked at all the components three separate times and checked all bolts for tightness. THis...
  8. thinking about lowering my ride

    V6 Tech
    yo, so ive been tossing around the idea about lowering my 03 v6 and need to get some info. before i decide to order the parts. the car has the stock suspension the tires are 17" but i have the 10.5 in the rear and 9" in the front (Rear 315/35/17) and (Front 275/40/17) i wanna lower the car as...
  9. 2011 Mustang GT Suspension on 2011 V6 Coupe

    2011 - 2014 V6 Mustang Tech
    Hi everyone, I want to improve the handling of my car, but I am concerned about lowering it since I have scrapped the front air damn at stock ride height a few times already. I am thinking of getting a 2011 GT suspension from New Take Off. I do have a couple concerns though. From my few...
  10. 1967 Mustang Fastback suspension question

    Classic Tech
    What kind of front and rear coil over suspension could I use or what newer car suspension could I put in my mustang
  11. Looking to Tighten up 2001 Musgtang v6 Suspension

    V6 Tech
    Hey, I was hoping to find a way to tighten up my Mustang's suspension without lowering it. I live in a place with a ton of speed bumps and can't lower it without scraping all the time. All the kits that I have looked at lower it. Any ideas?
  12. Can anyone help me finda 4 to 5 lug conversion kit

    2.3L Talk
    I am looking for a 4 to 5 lug wheel spindle for my 92 2.3 liter mustang lx convertible. Does anyone know if there is a kit for it or a very very extensive instructions on how to do it? :im confused:
  13. 96 Mustang suspension

    4.6L Talk
    I have a 96 GT with around 111000 miles on it and I want to change shocks/struts and lowering springs. Has any one used the M-5400-A package? I want the car to handle good on the road but not ride too stiff. I have 18x9.5 Cobra R wheels and 275/35 R18 Falken FK542 tires all the way around. I...
  14. Putting in a 8" rear end to replace my 6 cyl suspension

    Classic Tech
    Hi, I am replacing my 6cyl suspension with a v8 suspension in my 1966 project. I am getting a new rear end but I wanted to make sure I was getting the right measurements. I am looking at a 8" rear out of a granada with a 3.0 ratio. Do I need 54" or 52" at the tube flange? Are the perch...
Top