Ford Mustang Forum banner

t45

  1. 5.0L Tech
    Please Delete
  2. 4.6L Talk
    Does anyone have personal experience with 5-speed T45 transmission repairs in the Tacoma WA area? Any recommended repair shops (based on your experiences)? Thanks for reading
  3. 4.6L Tech
    Have a 2001 Mustang GT with a T45 transmission. The transmission is fine shifting through all the gears from first through fifth. The problem I am having is when on highway down shift from 5th into 4th its fine, but when I go back from 4th into 5th it grinds. It doesn't do it all the time but...
  4. 4.6L Tech
    I have a 2000 GT with a bad t45, I also have a 98 cobra t45 that has sensors, cables/wiring, and crossmember. My question is what all will I need to do to swap them out? thanks in advance guys! chad
  5. SVT Cobra Tech
    Okay guys, so I blew my transmission over the weekend. I found a fairly cheap one in my are, but it is from a 2000 mustang GT. I was told that the speedo will not fit into the 2000 t45 tranny. I guess i need to swap out the tail shaft? I just want to get a second opinion before I begin to do...
  6. 4.6L Talk
    hi everyone, i have an early 01 gt and i am going to swap the broken t45 with a tr3650 i picked up with 50k on it. my question is which clutch to buy one for a early 01 or one for a mid01 up? i have a 6 bolt flywheel, i am very confuised because ive heard either one will work but when shopping...
  7. 4.6L Tech
    Okay so first sorry if theres an other thread out there about this subject but i couldnt find it, I have a 1997 cobra and when im at high rpms like after 6400 i cant get into forth gear and from 1st to 2nd it grinds pretty bad only at high rpms though, are my syncros going bad or could it be...
  8. Classic Tech
    Hi, I am in the process of a tranny swap and have almost built in a T45 RS (from Kiesler). It is an awesome package and relatively easy to build in. I do still need to find a shifterboot. The original does not fit as I had cut cut out about one(1) inch of the side of the original opening on...
  9. 4.6L Tech
    Hey everyone, I understand that you can fill manual transmissions through the shifter housing... but how will I know when it is full and not overfilled? I know that the T45 (Manual Transmission in my 98 GT) requires 6.6 pints, so if I carefully measure the correct amount and pour it in will it...
  10. 4.6L Tech
    Hey, I will be changing my transmission fluid in my 1998 Mustang GT with a T45 soon. I have purchased the fluid already, but I have a few questions. I have heard that you can fill the transmission by removing the shifter and pouring the fluid into there? How would I know when it is full. Even...
  11. 4.6L Tech
    So im pretty sure my 1-2 syncro seized up and now its only allowed to 1st gear while moving. Im thinking its time just to replace the ol' t45. I looked at the t56 conversion kits and theres a company in texas that sells bellhousing and all for 1200 but i need a shaft and few other parts so it...
  12. 4.6L Tech
    Has anyone done a swap with a 96-98 T45 to a 05+ 3650? Or will the 05+ 3650 even fit? If so what kind of mods? Thanks...:headscratch:
  13. 4.6L Tech
    Please feel free to hit me up with any corrections I have overlooked... This write up is for the T-45 tail shaft swap. I had to change my tail shaft due to the magnetic speed sensor (found in the 99+ models) as appose to the gear driven sensor (96-98 models). Car getting the tail shaft swap...
  14. 4.6L Tech
    Hello all, My question is this: I have a 2000 Mustang GT. My transmission was going out so I bought a rebuild one for $200. I believe it came from a 96-98 model. Now, the transmission I purchased has a gear driven VSS as oppose to a magnetic VSS (which is what the 2000 Mustang model goes off...
Top