tail light

Does anyone have access to the 1999/2001 COBRA SPECIFIC wiring diagram for the multifunction switch and rear taillights/blinkers? I very good at wiring and wish to create my own sequential kit for these cars but after buying two separate "service manuals" and only getting generic GT diagrams I...

1994 GT: connecting brake light signal to legally tow small trailer I need to tow a small jet ski on a small trailer for my 1994 GT 5.0L convertible (manual tranny, of course) for extremely-short distances (a couple miles) at low speeds (< 40mph). I've already got the hitch (see attached photo...

Hello everyone, I noticed some white spots on my left tail light. I have tried to scrub them away, but nothing happens. I was wondering if anyone else has this issue? Any help is greatly appreciated. Thanks!

I have a 1971 Ford Mustang and had a question about tail light operation. Which lights should turn on when I press the brake? Currently only my inner light on left and right turn on when I press the brake. The outer light on left and right are my turn signals. If I turn on the headlight...

First let me say I just bought my 88 GT and I'm very much a novice when it comes to mustangs and car repair in general. So if some of my questions seem stupid forgive me! The taillights on my 88 GT convertible appear to be LX taillights so not sure why they're on my GT. imgur: the simple...

Besides the kit from AM, has anyone used another vinyl kit? I want to tint my tail lights just enough to take the edge off. MY concerns are the quality of the kit and how good they are cut. I don't want to spray them.

Hey guys, Ive got a few wiring problems going on in my 68 mustang coupe. I was hoping that any of you might have an insight into whats happening. The last owner of the car had an electrical fire happen in the car in the steering column when he was driving it. it melted the steering wheel and...

As we all know, the third tail lights on the 99-04 Mustangs take a beating from the sun. Has anyone had success in restoring them back to looking new? I have tried wet sanding with 1000, 1500 and 2000 grit sand paper and meguiars plastix, but no luck. Any help is appreciated! I really don't want...

As we all know, the third tail lights on the 99-04 Mustangs take a beating from the sun. Has anyone had success in restoring them back to looking new? I have tried wet sanding with 1000, 1500 and 2000 grit sand paper and meguiars plastix, but no luck. Any help is appreciated! I really don't...

so heres the video of it YouTube - Mustang i have seen tons of mustangs with this problem, and i had the same problem on the other tail light. I know it blinks fast just so you know the tailight is not working properly, like an alarm mechanism, and last time i had it fixed at a ford...

I have a 2005 V6 mustang, and recently noticed that my third brake light (or high mounted stop light, which ever you prefer) would not illuminate when braking. I replaced the bulb, and it will still not work. Any help would be greatly appreciated. Which fuse in which fuse box regulates this...

Hi All, This is my first post here, just joined tonight. I'm finally putting my 1967 s-code GTA Fastback back together after 10 years and I'm sure I'll have to ask for a little assistance in refreshing my memory. My first issue deals with my new Drake Scott Tail Light Harness. I realize I...

Im having a problem with my 1996 Ford Mustang v6, 3.8L, normal mustang. Today while driving, somebody told me my brake lights arent working. I went home, and checked. Point is, parking lights work where the brake lights shine. The problem is the (braking) Stop light switch, correct? IF so, I...