Ford Mustang Forum banner

throwout bearing

  1. Need Help w/ Weird Sound!

    4.6L Tech
    Hey everyone this is my first post on this website! But anyway, I am in need of a little help/knowledge. I just had my throw-out bearing go bad about a month ago so I had it replaced as well as a new heavy duty clutch put in. But since I have gotten the car back, I have noticed a weird sound. It...
  2. Clutch Replacement?!

    2005-2010 Mustang GT Tech
    I am looking to replace the clutch in my car in the next 1k-5k miles. It is a 08 Bullitt, with the added power and 3.73 gears over the gt (I know not a lot). Here is the question. Will a stage 1 clutch really make a difference on acceleration? I do not plan on making any horse power mods soon...
  3. Clutch issues again! 2006 Mustang V6 4.0L

    2005-2010 V6 Mustang Tech
    About 6 months after the purchase of my Mustang my throwout bearing started making a noise. Then all the sudden my clutch freaked out and wouldn't work. Got it replaced and here I am 1 1/2 years and the throw out bearing is starting to make that noise. Is this a recurrent problem for this...
  4. 2001 Bullitt GT throwout bearing

    4.6L Tech
    Okay so my throwout bearing needs to be replaced. My first question is if its really worth doing right away, or should I just wait until my clutch wears out and replace the whole kit then? The clutch grabs right off the floor as it is, just a little noisy, and stiff as heck...its a stage 2 as...
  5. 1965 Mustang squeal when clutch pedal is pressed

    Classic Tech
    I have a 65 mustang with a 331 stroker and a 4 speed toploader transmission. I just put in a new centerforce clutch kit with pressure plate and self aligning throwout bearing. I also put in a muscle z bar kit from Barillaro Speed Emporium. When I press the clutch pedal in a hear a squealing...
  6. Transmission noises

    2005-2010 Mustang GT Tech
    So while im in 5th gear going around 40-45 mph, i start to hear a rattling noise, i can hear something rattling around somewhere im guessing its either my pilot bearing or TOB. When i put my clutch in it stops completely, when my car is idling on a cold start i can hear it rattling my driveway...
  7. Clutch blew but what about the tranny..

    V6 Tech
    Last night when i went to shift into 3rd at pretty high rpm the car made a very loud boom. I dont know if i missed 3rd and popped the clutch too fast and it blew or what. Right when it happened i got stuck in neutral and couldnt get into any gear and the rpm's started to drop. i had to roll all...
  8. 2000 GT Transmission Rebuild T-45 COSTS

    4.6L Tech
    I have a 2000 GT with 155,000 miles and I am having some transmission issues. When putting the car into reverse there is always a grinding whether its small or ALOT! Also sometimes it takes 4-5 pumps of the clutch and a lot of force to even get it in reverse. Also when downshifting from 5th to...
  9. Throwout Bearing

    4.6L Tech
    Ok so I got a new throwout bearing, its not installed but when I spin it through my finger it spins uneven, is this normal? or should it spin evenly all around? The old one rattles like crazy when I let go off the clutch.
  10. Got a constant noise gets worse when clutch is pushed

    4.6L Tech
    Hey guys. My clutch was making noise and was very hard to push but the noise was only when it was cold. If you drive it for 10 or 15 min it would quit. I figured it was the throwout bearing. So I replace the throwout bearing pilot bearing and the clutch (pressure and grab plat). Put it back...
  11. 1999 mustang v6 idle really low. please help im desperate!

    V6 Talk
    Car has a ticking noise when started and was told it was an exhaust leak but I'm mechanicaly slow so I don't know. I also started hearing a belt sounding type of wining and was told that it was a throw out bearing and now it idles at 500 in neatrul abut doesn't stay steady goes up to 700 and...
  12. Squealing/Whining noise when engaging clutch

    V6 Tech
    I am having this squealing/whining noise when releasing the clutch pedal (engaging the clutch). It only happens when the clutch is being engaged. Once it's engaged fully ( pedal released and put to rest), it goes away. I have read various threads suggesting it could be either pilot bearing or...
  13. 2006 V6 newish clutch rattling & slipping. HELP!!!!

    2005-2010 V6 Mustang Tech
    :confused: less than a year on a clutch that was properly broken in, and put together with a resurfaced flywheel, but I am slipping. already. From 2 weeks after install up to now, when idling, the clutch rattles and is the most obnoxious sound. When I depress the pedal, I get no vibrations or...
  14. 1993 Mustang GT T-5 Throwout Bearing Retainer Bolts

    5.0L Tech
    1993 GT with T-5 I am replacing the stock throwout bearing retainer on my T-5 with the Ford Racing part (Part # M7050A). I've noticed that there is a different mating surface for the bolt heads between the old part and new part. The original part is flat where the bolt head snugs up. The new...
  15. Replaced Clutch, soo much squealing!! help!

    2005-2010 V6 Mustang Tech
    I have a 2006 4.0 and I got a new clutch put in at 59,000 miles. That was 2 months ago. I'm 16, been driving standard transmission for 1.5 years, over 15,000 miles. Seems I have the "jist". my problem comes up here: Resurfaced flywheel, SPEC clutch (stage 1), nothing done past the clutch...
  16. Stock V6 1994 Mustang Throw-out Bearing

    V6 Tech
    My throw-out bearing is making noise agian on my stock 94 v6 mustang with manual tranny. This will be the forth time it needs to be replaced in just the past couple years and im not sure why? After about a month or two after its replaced it starts to chirp when I let off the clutch, I could use...
  17. 1998 Mustang v6 - Just replaced clutch and now have a tapping in throw out bearing.

    V6 Tech
    I just finished replacing my clutch yesterday and was driving home and noticed a tapping coming from somewhere in the floor. I started the car up today and it was took me having to drive around for a few mins to warm up and it started again. The sound seems to start when I rev around 2000 to...
  18. Need some help finding a new clutch!

    4.6L Tech
    Hey guys I'm pretty sure my throwout bearing has gone bad. Ever since I've had it, every time I push the clutch pedal in I hear a kind of winding sound until the clutch pedal is released. I have a 2001 gt 5 spd with steeda CAI, BBK Lt headers, BBK O/R X pipe, and Borla stingers, Steeda...
  19. Hi everyone, 2006 Mustang GT (Dusty from Bay Area California)

    Introductions
    Been a member over a year, love the forums and advice here, but never posted an introduction and kind of stopped stopping by - now that I'm having issues with my clutch/transmission/or possibly my throwout bearing and thought now is as good of time as any. (still love my Mustang though...
  20. throw out bearing squealing will adjustable clutch cable help 2003 Musatng GT

    4.6L Tech
    So my throwout bearing is steal squealing it has got no better or no worse ive put 3 new throwout bearing in it within the past 2 years they all squeal but when you put just any pressure at all on the clutch it stops....Ive been told to get the firewall adjuster and that it would stop it...would...
Top