Ford Mustang Forum banner

tps and throttle body

  1. 4.6L Tech
    Sooo.... I was testing my tps with a multimeter and got weird numbers that stumped me.. now that I look it back together and the car idles at 2K RPM.... was it something I did or did a make a problem become more apparent
  2. 2005-2010 Mustang GT Tech
    Hey guys, I'm new to the forum. Hopefully I can get some much needed help. These past 3 weeks I have been having issues with my GT. It first started as I was driving down a highway and the RPMs started majorly surging. It started out going from about 2k-4k then gradually went down as I pulled...
  3. 2005-2010 V6 Mustang Tech
    Good day All! Hate to post another thread about the same thing but the more I read the more I seem to be spinning my wheels. I recently started having issues with my car. At first it was almost like I got some bad gas because it came and went over a two week period. it would idle at 1500 when...
  4. 4.6L Tech
    Hello, my 2003 Mustang gt began idling at over 2000rpm on my drive home from work the other night. I checked the TPS and it was working properly so i checked for vacuum leaks and found nothing. I then took the IAC off and cleaned it thoroughly and popped it back in. The car went back to...
  5. Introductions
    My car is bone stock minus the flowmaster mufflers. I have changed the IAC twice since January. It recently received a new TPS. I have taken the TB off and cleaned it out. I heard that the throttle body cleaner is bad for it, so I got some silicone sealant and re-coated the inside. There is no...
  6. 5.0L Tech
    Hi, I have a 1993 Ford Mustang GT 5.0L. After I cleaned the throttle body with throttle body cleaner, the idle started running 1000-2000 RPMS up and down. After this started happening I did a tune up changing the spark plugs, wires, distributor cap, and the rotor. Also I changed the idle air...
  7. 2005-2010 Mustang GT Tech
    So I got the codes. Car is in limp mode, code #1 is P2106, throttle actuator control system forced limited power. Guy Says I need a new TPS, and code #2 is P2135 electronic throttle control (ETC) position sensor A/B voltage correlation. TP-1 and TP-2 do not agree. I was told I need to purchase...
Top