Ford Mustang Forum banner

turn signal

  1. 2011 - 2014 Mustang GT Tech
    So i am retrofitting the s550 style lights for my 2011. Originally they had a plug that replaced where the turn signal bulb plugged into. I'm wondering A) if it matters how i plug it in (don't think it matters) and B) which wires would be the parking lights and which is the turn signal leads...
  2. 5.0L Tech
    My 89 GT convertible has no turn signals! no clicking, no lights outside.. But my hazards work! in my dash and outside the car they blink like a boss. I checked behind the fuse box, there is a small can shaped fuse but i've been told that is for the hazards only. I have messed with the ignition...
  3. 2.3L Tech
    I just cant figure this one out. The left turn signal in front is the only one that is not working. the rear left signal works, and both right signals work. Checked the wiring and found and repaired one of the wires that had almost broken completely. it was green with a yellow or white stripe...
  4. 2005-2010 Mustang GT Tech
    Hello everyone, A few weeks ago I've come to realize that my mustang doesn't do the "clicking sound" everytime when I put my turn signal on (both sides). It's only the clicking sound, the lights do come on with no problem. Now suddenly the check engine did come on. The garage scanned it and it...
  5. 2005-2010 Mustang Talk
    I changed out the bulb in my 2007 Mustang rear blinker - the turn signal tail light works now. However when I turn on the turn signal in the car it does the fast blink sound. What did I do wrong? Thanks for any help.
  6. 2005-2010 V6 Mustang Tech
    I have a 2005 v6 Mustang, and I changed the front turn signal housings back in April/May. I changed the parking lights on the side of the housings to white LED's, and changed the turn signal bulbs to LED white/amber switchbacks. The switchbacks have never given me a problem, but after a couple...
  7. V6 Tech
    Im in the process of getting my car straitened out so i can get it tagged and all i had left to do was replace a brake light. I took it for a test drive to make sure all the lights and stuff worked. Found out i no longer had turn signals, hazards, and i only get my brights when i pull back on...
  8. Classic Tech
    My turn signal switch is loose causing it to only come in contact when you put it in the right place. Is there anyway to fix this or make the contacts bigger? The turn signal harness is brand new. Thank you
  9. Classic Tech
    Hey, I thought the lights in the front valance were the turn signals? Are they really in the good instead? And if so what are the ones in the front valance for? Thanks! :)
  10. Introductions
    Hi, I recently replaced the turn signal switch on my 1966 coupe. The previously dis-functional brake-lights are now working. However, the right turn signal still does not work. The left turn signal works perfectly. When I signal for a right turn, both turn signals flash in a dimly fashion. Any...
  11. 5.0L Tech
    I was wondering if anyone else out there had this happen to them. Back in April 2001, when my 1989 LX 5.0 Mustang had 158K miles on it, the turn signal quit working but it was intermittent. I’d replace the flasher. It would be OK for a while, then it would quit working again. I started having...
  12. Classic Tech
    So I have posted a few threads reguarding my driver side turn signal not working. I have replaced the turn signal switch, headlight harness, and the parking light assembly and still not turn signal on the driver side. The kicker is the parking light works on both sides, and the blinkers work on...
  13. Classic Tech
    Hi All, I am troubleshooting why the headlights in my 67 mustang coupe don't turn on and why they cycle on and off in high beams. Through some research the problem seems to be a faulty headlight connector switch. Before I purchase would just like some feedback. I am also troubleshooting why...
  14. Classic Tech
    hey guys, last i posted i have a wiring isssue with my blinkers stop lights, tail lights, etc. well, i decided to replace the whole wiring harness in my column and now things work and have power! great! all wire colours match up. but there are some issues. well, the tail lights work when i turn...
  15. Classic Talk
    hey guys, last i posted i have a wiring isssue with my blinkers stop lights, tail lights, etc. well, i decided to replace the whole wiring harness in my column and now things work and have power! great! all wire colours match up. but there are some issues. well, the tail lights work when i turn...
  16. Classic Tech
    Hey guys, Ive got a few wiring problems going on in my 68 mustang coupe. I was hoping that any of you might have an insight into whats happening. The last owner of the car had an electrical fire happen in the car in the steering column when he was driving it. it melted the steering wheel and...
  17. 4.6L Tech
    My front left signal light is blinking fast but my left rear signal is not working at all but all the rear lights work when I brake. Can I get some suggestions...thanks in advance.
  18. Classic Tech
    As the title states, I'm having turn signal problems. All of my lights work. When I flip the turn lever, nothing happens. No indication they are on from the signal indicators on the dash and no blinkers, front or back. Also, my windshield wipers work, I've heard some of the wiring may be...
  19. Introductions
    Hi everyone! I need help with the replacement of the turn signal switch on my son's 65 Coupe. Unfortunately, the connector pin from the old harness was completely removed before the wiring could be labeled. The new switch wires do not match the wiring to the underdash connector. Please help...
  20. 2011-2014 Mustang Talk
    I recall reading a few people complaining about the lack of a one-touch turn signal feature in the newer Mustangs. For those who haven't seen in yet(I just saw it today) American Muscle has a solution for you. Mustang One-Touch Turn Signal Kit (10-12 All) at AmericanMuscle.com - Free Shipping...
Top