Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 30 Results
  1. 2011-2014 V6 Mustang Tech
    Hello, Idk if this is the right place for this question. But i just recently got myself a 2013 V6 base. And I'm doing some major upgrades on it. One thing i would like to do is add the fog lights in the grill like the GTs have. I'm looking at getting the Boss 302 Grill which comes with the spots...
  2. General Mustang Tech
    I’m having some issues. So since I got the car, the check engine light has been on. Same code. P1309. Well, I had a squeak I couldn’t find. Replaced the belt and pulley and it still squeaked. Decided to replace the camshaft synchronizer the squeak stopped and my check engine light went off...
  3. V6 Tech
    I got a basically stock 2002 v6 I wanna get a little bit more power out of and wanna know what are some of the first things you guys would do? And any advice that comes with that. Thanks
  4. V6 Tech
    Been searching inline for a few weeks does Anyone know where I can get the bolts for the top cover on a t5 tranny would be greatly appreciated borg Warner trans btw…
  5. V6 Tech
    My research is that the compatible hoods are from 1999-2004 however I’m finding conflicting information on if a GT hood from those years will fit my V6 40th Anniversary edition properly. If you know, please let me know. Thanks
  6. V6 Tech
    The hood latch is fine, it’s the recessed area on the interior of the hood that the latch is suppose to hook into has rusted out but there isn’t rust anywhere else on the whole hood. I’m currently using a tie down and only driving on local streets, under a certain speed to be extra safe so no...
  7. Audio, Video, Navigation & Alarms
    2011 V6 MCA Mustang Premium w/Shaker and SYNC -> AM/FM/Sirius, A/C, heater, fan controls, and the CD are all dead. The only thing I see on the display is AM 590, current clock time, SW for compass direction and 51 degrees outside temperature. There is loud static coming from the radio at all...
  8. V6 Tech
    I’ve been reading forums for days trying to figure out my issue trying things I never thought I’d have to try and none of them have worked I’ve tested dang near everything I could and still doesn’t want to crank it started just fine ran to get food turned the car off and then nothing and I...
  9. V6 Tech
    I am in need of someone who knows what this hose is called. It pours out of the hose when the vehicle is running and slowly drips when it’s off. I think it’s coolant, I tasted it it’s not oil I know that much. It is the hose that is black towards the bottom and it’s covered in a protective mesh.
  10. 2005-2010 V6 Mustang Tech
    Good morning, I hope everyone's having a great day. I have a 2005 4.0 V6 mustang, and I've had the car for about 40,000 miles. I've replaced the fuel pump, spark plugs, and wires on it, along with lots of front end parts recently. Lately, the car has been idling at a 250 RPMs at a stop, and my...
  11. V6 Tech
    I was on a short drive and after I proceeded forward when the light turned green, my car was very choppy as I let the clutch engage, then my check engine light came on, then it started flashing. I immediately pulled to the side of the road. When it was idling, it was very rough. The needle on...
  12. 2011-2014 Mustang Talk
    Can anyone explain the difference between these two parts when I google iac for 2012 v6 noting comes up, but when I google purge valve I see what’s right near the throttle body, so earlier cars have iac and newer just purge?
  13. 2011-2014 V6 Mustang Tech
    Currently looking under the hood of my 2012 v6 base model with a manual transmission and I noticed the only pulleys I see on my motor, are ac condenser, water pump, idler, alternator and the balancer, where is the power steering and where is the resvoir I see on some cars, it’s near the radiator...
  14. 2011-2014 V6 Mustang Tech
    Hey everyone I’ve posted recently about my 2012 v6 car that I picked up that had a p0430 code with a slight mis, changed the plugs and an o2 sensor, I just changed the cats today, turns out the cats were toast, there was nothing left to them inside, but my car is still running with a slight mis...
  15. 2011-2014 V6 Mustang Tech
    Hey everybody I just picked up a 2012 v6 6 speed manual car, I got it from the original owner. It was sitting for alittle bit, everytbing was fine the 2 times I scanned the car before buying it, now a few days later it threw the check engine light po430 code bank 2 I’m assuming for an o2 sensor...
  16. 2005-2010 V6 Mustang Tech
    What would it take to drop a 2011 V6 engine in my '06 ? I'm hoping for a direct swap with minimal mods, but not holding my breath. Just driving a 2011 isn't an option for me, don't like the body style.
  17. V6 Talk
    So I have a 04 V6 mustang and my plan for her is to make her into a track mustang ya know, able to handle turns and corners well and be pretty quick on her feet. I was wondering if anyone has any like set of parts or anything that I should give a look at. I'm the kinda guy to go for his own...
  18. New Member Introductions | No Tech Questions
    Hi everyone, I am a total novice learning as I go using AFM and you tube to figure things out. Hope I can gain enough knowledge to help someone else out here someday. I have a 2010 v6 candy apple red convertible stang. I have big plans for it. Super charger different gear ratio, upgraded...
  19. 2005-2010 V6 Mustang Tech
    Hi all, I have a 2006 Mustang 4.0L V6 Convertible, recently the top has stopped working and I'm at a loss as to how to fix it. I've been able to rig up power to the motor via jump leads and can make it go up and down this way. The relays click when I press the switch but still tried replacing...
1-19 of 30 Results
Top