Ford Mustang Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 5.0L Tech
    In the middle of replacing the 4 vac lines on the tree. i have everything right except the "S/C" (speed control module) line. i know the actually module is the little plastic box to the left near my break peddle, but i cant figure where the line goes from the tree. helpp
  2. Classic Talk
    OK, first some background. I have a 66 Convertible 289 engine with the stock intake manifold. I have added a Edlebrock Performer series Carb and a Petronix Flame Thrower III distributor and Ignition coil. I am close to hooking everything up. I am just not sure about the vacuum line. The...
  3. 5.0L Talk
    I just purchased a 1995 Mustang Gt it is bone stock with only 49000 miles on it. I know I want to put an exhaust on it but I do not want issues with the check engine light from the O2 sensors. I am told that in order to not deal with that I can only change out the pipes after the muffler...
  4. Classic Tech
    I have a 1966 Coupe with a 200 ci. I took the carb. off yesterday and want to identify which model i have. Will there be some identifying marks that help me to know which one I have? Also, there was a vacuum line that came from the exhaust manifold that was rusted through and snapped off...
  5. 5.0L Tech
    My 88 Mustang 5.0 has been running funny for a few weeks now. basically there is a hesitation in between the time I hit the gas and the time the Engine responds. its like you stomp on the gas, count to one, and then the engine will rev. at high speeds, if you coast and then gas it the car...
1-5 of 5 Results