Ford Mustang Forum banner
valve lash

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. New Member Introductions
    Hi everyone. I am having trouble adjusting my valve lash on my 1993 ford mustang gt 5.0 HO. It has GT40P heads and a mild Lunati Cam. The springs and lifters are stock as well as the pedestal mount rockers. My issue is since they are pedestal mount rockers there is no adjustment and this is my...
  2. New Member Introductions
    well first of all ill tell you what i have got -1965 coupe -1983 5.0 HO -1987 T5 -Granada front spindle/ disc brake conversion there isnt much on the car that is stock recently i have had some issuse with my motor it sounded like a exhaust leak, i dug a little deeper to realize my noise was...
  3. 5.0L Tech
    so i got the stock replacement pushrods from ford motorsport thinking that theyll work with my gt40p heads and steeda #18 cam. i just ordered the adjustment shims, but im really confused with what correct pushrod length to go with
  4. 5.0L Tech
    After rebuilding my 302 using; e303 cam, 3 steping the valves and new springs, valve guides, keepers, and most common parts with rebuilding heads, I also am using a used Holly System Max intake with 70 mm throttle body and a 73 mm Mass Air flow with 30 lb injectors, fuel psi reg. I have been...
1-4 of 4 Results
Top