wheel hop

Got a 2012 5.0, with aftermarket cold air intake and tuner, everything else is stock. Car came with 3.15 gears and tiger paw gtz tires. i'd really like to change gears and work on the suspension but i'm not in a hurry. SO question is what are some of the essentials to reduce or eliminate the...

I have 91 LX convertible with an on3 Turbo kit. I have installed aftermarket upper and lower tubular control arms..and I do run Nitto drag radials. Its not often but there are times I have to check all the fillings in my teeth are still there after layin on the throttle...seriously. I was...

So the whole family crammed in my new '14 GT this afternoon for an airport pickup and 100 mile drive to the suburbs. Interestingly enough, the stang responded in a few different ways. Weight distribution was 300lbs front, 400lbs rear, 50-65lbs trunk. First, and most obvious, there was...

Hi everyone, I was looking for an aftermarket UCA to eliminate the annoying wheel hop i get at high torque. Has anyone tried Steeda, Roush or CHE UCAs? I have read a lot of forums but kind of lost And still need advice. From what i read, Roush is non adjustable but they are the closet to the...

our local drags are starting soon and i need to upgrade control arms. my bushings are shot in my stock ones plus i wheel hope like crazy.. just wondering what has worked and what hasnt. its a daily driver with weekend strip visits still would like to keep some drivability comfort any input would...

i have a 1994 mustang with stock rear suspension. i have a 450 crank hp with a built aod with a 3000 stall and 3:73 gears and i cant hook up looking for some suggestions on upgrades to help. any imput on what has worked for you would be greatly apprieciated

I'm in the process of building a road coarse 67 flashback. I have built a box steel frame very similar to the one featured by art Morrison " g-machine frame". The front suspension is designed and built with unequal control arms. I was able to design what I wanted because there was an abundance...

I'm in the process of building a road coarse 67 flashback. I have built a box steel frame very similar to the one featured by art Morrison " g-machine frame". The front suspension is designed and built with unequal control arms. I was able to design what I wanted because there was an abundance...