wheel

I have a 1990 Fox Convertible 5.0, auto. Just did the ranger axle swap in the rear with new drums and I put the wheels from a 1994-2004 Ford Mustang "Bullitt" on. They are rubbing on the inner fender. What did I do wrong? Thanks for the help!

I have 4 of these 13" mag wheels. They were on a Sunbeam Alpine but a poor fit. The center emblem has a Mustang on it and the inside is stamped with the Ford logo. Does anyone know what car they were from and what they would fit onto? Thanks.

Hey guys! I need to get some new rims and tires for my 2014 GT. I have the basic stock 18x8 rims with 235/50/18. I would like to get a bit wider tire all around, was thinking 245 or 255. I was told I need to run a wider rim like 18x9 to upgrade to a wider tire or just upgrade to 19s. Not...

I have a 1969 mustang. I just replaced the rear center section and axles to get it driveable. I took it for a test drive and the wheel hop is ridiculous. How can I eliminate this? It has a 8 inch rear end. Do the lakewood traction bars work? Any links to parts or help would be appreciated. Not...

Im putting slicks and skinnies on a 91 mustang gt. I have 26x10 slicks on 15x10 rims. Just wondering what rim tire size combo you guys use for the front. I did some searching, but really didn't dig up much. Something like 24"x4" on a 15x4 maybe? Thanks. I know its posted on here somewhere????????

Closed.

Hi all, I am trying to brainstorm which tire and wheel combo I should go for. I have a 2014 GT with tracpack currently on stock 255/40/19 PZeros. Not lowered (yet) I do not like the looks of the tracpack wheels and I'm also finding a lot of wheelhop and spinning out with the PZeros, they just...

I have a 2013 mustang with brembo brake package. I need new tires but want them to be wider. I decided I'm going to go michelin pilot super sport tires. I was just curious about size. I have 2 options 275/35/19 tire or a 285/35/19 tire in the super sports. I am just afraid the 285 will rub up...

I have a howling sound from 30mph through 35mph and again around 60mph. My first thought was to replace the wheel bearings in the front so I went and bought two Timken wheel bearing and hub assembly's. I put them on while I was putting my SR Performance lowering springs on. After I finished...

Has anyone done this setup? Did it work: 1999 Mustang GT lowered 1" all else is Stock Rear Wheel Weldstar RT, Aluminum, Black, 15 in. x 10 in with 5.5 Backspacing Tire MT - 26X12.00R15LT - sportsman S/R Front: Wheel Weldstar RTS Forged, Aluminum, Black, 15 in. x 7.275 with 4.5" backspacing...

I've searched multiple forums to find an answer, and have been highly unsuccessful. My friend has a 2005 mustang and is trying to put 19" wheels on it (with a width of 9.5). We went to a shop to have them installed with 245/45/19 tires, and they got them on and said they would not fit without...

Hey guys, I am experiencing some really loud squeaking when I'm driving. It stops when I apply the brakes and come to a full stop but starts right back up as soon the wheels start moving again. I'm thinking wheel bearings/balljoints/tie rods but seeing as how I am having no general steering...

2014 mustang lowered 1.25 front ,rear 1.5 sve drift wheel 10" wide widest tire in the rear possible?

http://www.tamparacing.com/photopost/data/3520/New_Truck_0061.jpg Is it weird to want this? Not with the giant tires of course, not trying to make a monster truck. Regular sized tires with those wheels. And does anyone know if they have something like this avaiable anywhere for an 05...

Ive got some 15x7 draglites for the front of my 91. Not sure of the backspace- looks like about 5". The front left fit decent, just barely scraped the caliper bolt. The front right however, different story. The wheel was bound up so bad, it wouldnt turn. At first, ithought the wheels were...

Okay.. Right now I have an all around set of 14 inch cragars on my 1966 Coupe (289).. I have the scott drake front suspension on the front but it's pretty much stock. Right now I have a tire width on 215 all around and I plan on keeping that width for the front. However for the back I want the...

I have a torch red 2010 GT and I really can't pick a hood or wheels. I've gone from the cervini cobra r to a 3in cowl to a tiger racing hood and wheels I've ranged from cruizin concepts fr500 stealth black to eleanor wheels powdercoated black to vossen cv3s. If anyone has any advice or ideas I'd...

TL;DR - need help finding winter wheels/tires for '13 GT w/ Brembo's Wall of Text: I've had my 2013 GT with Track Pack (so, Brembo Brakes) for a couple of months now. October has just started but I'm fairly confident that the Pirelli's are going to be pretty useless come December/January here...

Hey all, So I've been the proud owner of 1999 Electric Green 3.8L Mustang for almost 2 years now, and I think it's about time to do something about those stock wheels. See, a couple months ago, I stumbled upon a stupid good deal for a set of four 17" black Bullitt OEM rims and tires (245's in...

Hey guys, I have a 2004 GT automatic. I just recently had new pads and rotors replaced on all four wheels. I did this because there was a high pitched squeel coming from the right rear wheel. There was also a type of grinding felt in the brake pedal right before I come to a complete stop...